Proper spacing when hanging bikes in garage by one wheel?
#1
Senior Member
Thread Starter
Join Date: Nov 2015
Location: Lacey, WA
Posts: 1,707
Bikes: Stevenson Custom, Stevenson Custom Tandem, Nishiki Professional
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Likes: 0
Liked 196 Times
in
128 Posts
Proper spacing when hanging bikes in garage by one wheel?
Thought I would go for the trifecta.
We've discussed: (1) hanging bikes by one wheel in the garage, (2) issue of unheated but insulated garage for storage, so for (3) what is recommended as the distance between bike hangers if you hang them front wheel/handlebars, rear wheel no handle bars, front wheel handlebars, etc.?
I know it depends on handlebar width, mine run 38-44.
Thanks for your recommendations.
Take Care
We've discussed: (1) hanging bikes by one wheel in the garage, (2) issue of unheated but insulated garage for storage, so for (3) what is recommended as the distance between bike hangers if you hang them front wheel/handlebars, rear wheel no handle bars, front wheel handlebars, etc.?
I know it depends on handlebar width, mine run 38-44.
Thanks for your recommendations.
Take Care
#2
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
No set distance. Just enough to provide clearance. I hang mine, alternating front wheel hang, rear wheel hang.
Likes For CV-6:
#3
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
I'd guess about eight inches. I base that on a hanger kit I have where the bar is, I think, 48" long and holds six hooks. Bikes get hung staggered front up/front down. Depending on surrounding clearance, hanging and removing can be a bit dicey.
#4
Senior Member
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
I've got everything from 2 wheels on ceiling hooks spaced 12" center to center. I also have a 16" offset between bikes. I'm sure 9' center to center would work, but 12" makes it easier to get them in and out. 9" would probably be fine with a wall rack and enough space to handle them in an ergonomically correct manor.
Likes For bark_eater:
#5
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
I settled on 12" between hooks, and am content with that. Some bikes are a little snug, but it's not a big deal to swing one neighbor out of the way with my shoulder while hanging one up or taking it down.
Likes For ThermionicScott:
Likes For shoota:
#7
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,997
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4957 Post(s)
Liked 8,099 Times
in
3,833 Posts
The bikes on the wall are spaced at about 15". I could probably go a little tighter if I was trying to make things more compact.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#8
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,216 Times
in
1,103 Posts
I don't recall spacing on this configuration. I had the problem of height limitation. Removed the front wheel to rotate the bar and then hang the wheel on the pedal. Worked fine.
P8031673 on Flickr
Now the spacing here is 10" which is a problem with upright bar bikes. This also allows alternating direction of the bikes or not.
P1000485 on Flickr
P8031673 on Flickr
Now the spacing here is 10" which is a problem with upright bar bikes. This also allows alternating direction of the bikes or not.
P1000485 on Flickr
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#9
Senior Member
Join Date: Sep 2006
Location: Napa Valley, CA
Posts: 908
Bikes: Wife says I have too many :-)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 250 Times
in
158 Posts
Great question ! I am getting ready to install hooks for hanging my bikes. Very helpful to see the examples.
#10
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
For those hanging them on the wall, how do you keep them from pivoting back and forth against the other bikes? Or you just push them aside when needed?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#11
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,496
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 583 Post(s)
Liked 699 Times
in
394 Posts
Names of all posters here will be noted as having a greater problem that has created this problem.
Likes For sd5782:
#12
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,997
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4957 Post(s)
Liked 8,099 Times
in
3,833 Posts
Gravity pulls the bike against the wall with enough force to keep them in place, but they are still easy to push aside, when needed.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
Likes For Eric F:
#13
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,799
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,329 Times
in
837 Posts
You mean bike hoarding? I resemble that remark, and I am one of the small players in that game.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#14
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
That's your answer right there. The space between the hooks should be the width of your handlebars. I've got mine lined up, handlebar-to-handlebar, with a second row that let's me use the space in between. I tried hanging alternate bikes from the rear wheel, but that's awkward to hang or take down. The second row is also tricky, since it needs to squeeze between two sets of handlebars, so you might want to leave an extra couple of inches if you plan to do that.
BTW, the RubberMaid FastTrack system lets you move the hooks.
If you're just screwing hooks into the wall, you'll either need an additional board to screw into or you'll be limited by where the studs are.
BTW, the RubberMaid FastTrack system lets you move the hooks.
If you're just screwing hooks into the wall, you'll either need an additional board to screw into or you'll be limited by where the studs are.
__________________
My Bikes
My Bikes
#15
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
__________________
My Bikes
My Bikes
Likes For Andy_K:
#16
Senior Member
Thread Starter
Join Date: Nov 2015
Location: Lacey, WA
Posts: 1,707
Bikes: Stevenson Custom, Stevenson Custom Tandem, Nishiki Professional
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Likes: 0
Liked 196 Times
in
128 Posts
Thanks posters for your advice and the pictures really help.
Why ask the question?
The wealth of perspectives and solutions provided above.
Take Care
P.S. Will post when I've got the garage storage done.
Why ask the question?
The wealth of perspectives and solutions provided above.
Take Care
P.S. Will post when I've got the garage storage done.
#17
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,799
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,329 Times
in
837 Posts
Point well taken. I do envy folks with ample storage and workshop space.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#18
Senior Member
Thread Starter
Join Date: Nov 2015
Location: Lacey, WA
Posts: 1,707
Bikes: Stevenson Custom, Stevenson Custom Tandem, Nishiki Professional
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Likes: 0
Liked 196 Times
in
128 Posts
AndyK and BFisher what wall hook rack systems do you use?
Are they still available?
I like it that you can adjust the hanger placement to fit different bikes as your collection changes without making more holes in the garage walls.
Take Care
Are they still available?
I like it that you can adjust the hanger placement to fit different bikes as your collection changes without making more holes in the garage walls.
Take Care
#19
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
I built that awesome custom bicycle holder when I thought I would limit myself to 6 bikes....oops. Now I have to figure out another system and sell/rehome the custom, wheeled monster.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#20
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I started out with a 4-foot rail and two hooks. Then N+1 happened.
__________________
My Bikes
My Bikes
#21
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,821
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2441 Post(s)
Liked 3,136 Times
in
1,975 Posts
I use the Rubbermaid FastTrack Rail system. It's still being sold at places like Home Despot.
I started out with a 4-foot rail and two hooks. Then N+1 happened.
I started out with a 4-foot rail and two hooks. Then N+1 happened.
Sort of expanded like the US railroad systems in the gilded age?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#22
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,909
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,932 Times
in
2,557 Posts
I hang mine all by the front and stagger the heights. (Makes putting them away far easier.) 11" apart, heights staggered 12". Lower hook at 72" off the floor. I could narrow up the spacing but hanging my heavy farmers market bike and road bikes hammered from rides is easier with a little extra room.
#23
Senior Member
Join Date: Dec 2005
Posts: 17,159
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3811 Post(s)
Liked 6,716 Times
in
2,613 Posts
I don’t have a garage but instead a 170-year-old basement with a relatively high ceiling. My hooks are spaced 12” apart, and I stagger hanging by front and rear wheel.
#24
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,802 Times
in
2,286 Posts
The objective is to pack them as closely together as possible. Some people are in the unenviable position of being limited in their bike purchases by storage space. For those people I recommend making friends with those that have more storage room than bikes (I know, how can this be?) and bone up on the Zero Bike concept.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#25
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,025
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 438 Post(s)
Liked 925 Times
in
370 Posts
standard 16" stud spacing works if you stagger the hook height
The ones to the right work good, the ones to the left are a little too close together vertically
The ones to the right work good, the ones to the left are a little too close together vertically
__________________
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
59 Allegro Special -- 72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
Likes For droppedandlost: