Anvil tube bender
#1
Junior Member
Thread Starter
Anvil tube bender
Hi. I understand that Anvil is permanently closed. Have been looking on videos on the Anvil tube bender and it is just what i need for mye Reynolds 631 tubes. Does anyone have one for sale? Or if not, is it possible to make some measurements of the parts so that i can produce one myself? That is if the production of that bender is also discontinued.
#2
Team Beer
Join Date: Apr 2004
Location: Sacramento CA
Posts: 6,339
Bikes: Too Many
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 159 Times
in
104 Posts
Cobra makes a tube bender that you can buy today.
https://www.cobraframebuilding.com/store/toob-bender
https://www.cobraframebuilding.com/store/toob-bender
__________________
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
I'm not one for fawning over bicycles, but I do believe that our bikes communicate with us, and what this bike is saying is, "You're an idiot." BikeSnobNYC
#3
Junior Member
Thread Starter
Cobra makes a tube bender that you can buy today.
https://www.cobraframebuilding.com/store/toob-bender
https://www.cobraframebuilding.com/store/toob-bender
#4
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,398
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,697 Times
in
2,518 Posts
I'm not sure I believe you can make a long bend in a butted top tube with a bender like that. My impression is that people are mostly using that style of bender for short bends in seat tubes for tire clearance. And obviously bends in smaller diameter tubes.
Last edited by unterhausen; 11-05-21 at 05:45 PM.
#5
Senior Member
Join Date: Aug 2012
Location: Seattle
Posts: 507
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 144 Times
in
88 Posts
You may want to contact Adam Sklar and ask what he does. My sense is that a straight gauge tube running through 3 rollers would be more suitable to large radius curves for a top tube.
__________________
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
https://www.flickr.com/photos/54319503@N05/
https://www.draper-cycles.com
#7
Senior Member
Join Date: Jan 2013
Location: South Jersey
Posts: 2,266
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 714 Post(s)
Liked 800 Times
in
475 Posts
Anyone that is making curved top tube frames with a constant curve is using a tubing roller. The most common one one is this Harbor Freight roller https://www.harborfreight.com/tubing...psugg_q=roller with dies from Swag Offroad https://www.swagoffroad.com/SWAG-Tub...ries_c_54.html
Rolling a tube requires the tube to have sacrificial material on each end, because you cannot roll the tube all of the way through the full length of the tube. You will have a flat section on each end of the tube that has to be cut off, so a long straight gauge tube is what is generally used.
Rolling a tube requires the tube to have sacrificial material on each end, because you cannot roll the tube all of the way through the full length of the tube. You will have a flat section on each end of the tube that has to be cut off, so a long straight gauge tube is what is generally used.
#8
Junior Member
Thread Starter
Anyone that is making curved top tube frames with a constant curve is using a tubing roller. The most common one one is this Harbor Freight roller https://www.harborfreight.com/tubing...psugg_q=roller with dies from Swag Offroad https://www.swagoffroad.com/SWAG-Tub...ries_c_54.html
Rolling a tube requires the tube to have sacrificial material on each end, because you cannot roll the tube all of the way through the full length of the tube. You will have a flat section on each end of the tube that has to be cut off, so a long straight gauge tube is what is generally used.
Rolling a tube requires the tube to have sacrificial material on each end, because you cannot roll the tube all of the way through the full length of the tube. You will have a flat section on each end of the tube that has to be cut off, so a long straight gauge tube is what is generally used.