Quiet bike = upgrade?
#1
Junior Member
Thread Starter
Quiet bike = upgrade?
A week ago I worked on my bike to remove as many of its sounds as I could... bottom bracket clicks, seat squeaks, things rattling in the toolbag, etc. The only sounds left are a quiet sound of the chain and that of the tires on the road. The last two rides I've found pleasantly astounding. The bike seems faster and yet more comfortable... probably because there are less of my senses telling me that I'm going over a bump or over a rough road. If I didn't know that I was riding the same bike, I would think that somehow I'd bought a new bike that's worth considerably more than the one I have. Is it just me, or is this something that everyone experiences?
Likes For kirbyx:
#2
Senior Member
Join Date: Sep 2017
Posts: 7,893
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6974 Post(s)
Liked 10,975 Times
in
4,695 Posts
A week ago I worked on my bike to remove as many of its sounds as I could... bottom bracket clicks, seat squeaks, things rattling in the toolbag, etc. The only sounds left are a quiet sound of the chain and that of the tires on the road. The last two rides I've found pleasantly astounding. The bike seems faster and yet more comfortable... probably because there are less of my senses telling me that I'm going over a bump or over a rough road. If I didn't know that I was riding the same bike, I would think that somehow I'd bought a new bike that's worth considerably more than the one I have. Is it just me, or is this something that everyone experiences?
Likes For Koyote:
#3
Senior Member
Some people are alarmingly oblivious to the agonized desperate cries from their bicycles, but no, it's not just you. I think most people would frame it the other way, though: a smooth-running bicycle isn't so much "upgrading," as a disturbed bicycle is in need of fixing.
Likes For HTupolev:
#4
With a mighty wind
Join Date: May 2015
Posts: 2,596
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1089 Post(s)
Liked 871 Times
in
491 Posts
Road bikes should be silent unless coasting. If you have the fortune of quiet roads to ride, it’s a pleasure.
Mountain bikes ought to be quiet too but damn if I can’t chase every creak. Once it gets bumpy, I don’t hear anything anyway.
Mountain bikes ought to be quiet too but damn if I can’t chase every creak. Once it gets bumpy, I don’t hear anything anyway.
#5
Senior Member
Join Date: Sep 2020
Location: Scotland
Posts: 503
Bikes: Way too many
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 900 Post(s)
Liked 607 Times
in
364 Posts
each click and creak is the result of some sort of friction which will have an impact on performance (albeit minor). So you may find that it is running better in addition to being quieter.
#7
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,438 Times
in
819 Posts
Squeaks, clicks, rubbing, etc., drive me nuts. I can never let one get to the point the OP is describing. One that took me a while to locate wasn't the bike, but the shoestring aglets clicking when hitting the crank arms. I always double tie, but those strings I had to shorten. The shoes did not have a string retainer on them. I feel faster, more efficient, and comfortable on a clean and quiet bike. That includes the rear wheel hub, but minimal ratchet noise is ok. My hearing is not so good anymore, ergo, I do not hear quiet noise so much, and I am never sure where it is coming from. The low level, meditative hum from the chain and tires on the road is all I want to hear from the bike.
Likes For delbiker1:
#8
Senior Member
Join Date: Oct 2010
Posts: 8,516
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
Likes For seypat:
#9
Senior Member
Join Date: May 2016
Posts: 3,947
Bikes: Trek 1100 road bike, Roadmaster gravel/commuter/beater mountain bike
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 2281 Post(s)
Liked 1,710 Times
in
936 Posts
Squeaks, clicks, rubbing, etc., drive me nuts. I can never let one get to the point the OP is describing. One that took me a while to locate wasn't the bike, but the shoestring aglets clicking when hitting the crank arms. I always double tie, but those strings I had to shorten. The shoes did not have a string retainer on them. I feel faster, more efficient, and comfortable on a clean and quiet bike. That includes the rear wheel hub, but minimal ratchet noise is ok. My hearing is not so good anymore, ergo, I do not hear quiet noise so much, and I am never sure where it is coming from. The low level, meditative hum from the chain and tires on the road is all I want to hear from the bike.
#11
Senior Member
Join Date: Jan 2010
Posts: 39,261
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18428 Post(s)
Liked 15,582 Times
in
7,337 Posts
Likes For indyfabz:
#12
Senior Member
Join Date: Jan 2010
Posts: 39,261
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18428 Post(s)
Liked 15,582 Times
in
7,337 Posts
Heh. I remember the first time my FD cable end got bent and was making a "tink" sound every time the crank arm hit it. Drove me crazy. Took me a while to figure out where the noise was coming from. After that, I knew the first place to look when I heard that sound again.
#13
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,002
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6199 Post(s)
Liked 4,816 Times
in
3,323 Posts
Sure I like quiet bikes. But I think a lot of people have too high a expectation of how quiet that should be. They are after all mechanical things with lots of moving parts and pieces that flex and rub against other parts.
#14
Senior Member
Join Date: May 2022
Location: USA - Southwest PA
Posts: 3,100
Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1401 Post(s)
Liked 1,886 Times
in
1,085 Posts
#15
Wheelman
Join Date: Aug 2021
Location: Putney, London UK
Posts: 847
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 298 Post(s)
Liked 676 Times
in
341 Posts
I'm a fan of quiet bikes too.
Noise is just annoying, it's also a possible sign of unnecessary wear being done, and you're suppling the energy for that pointless noise.
I prefer to hear the environment, whether that's wildlife, wind noise, or even cars.
These days on a local multi user path the pedestians know I'm behind them when I shift down on the Suntour Power Shifters
I've also noticed 'modern' freehubs are really noisy when freewheeling - you can hear them 50 yards away.
I can only just hear my Sunrace freewheel from 5 feet away.
Edit: waxed chain too.
Noise is just annoying, it's also a possible sign of unnecessary wear being done, and you're suppling the energy for that pointless noise.
I prefer to hear the environment, whether that's wildlife, wind noise, or even cars.
These days on a local multi user path the pedestians know I'm behind them when I shift down on the Suntour Power Shifters
I've also noticed 'modern' freehubs are really noisy when freewheeling - you can hear them 50 yards away.
I can only just hear my Sunrace freewheel from 5 feet away.
Edit: waxed chain too.
Last edited by Aardwolf; 10-05-22 at 09:09 AM. Reason: More info
#16
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,118
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,438 Times
in
819 Posts
Yes, I understand that. I have carbon fiber Orbea Avant that is never going to be as quiet a couple of my other bikes. I have minimized that noise, but, I have also accepted that it is what it is. After riding it for 30 minutes or so, I really do not notice it much. I suspect that is probably true for most bikes that have minimal, low-level noise.
#17
Senior Member
Join Date: Oct 2005
Location: SW Ohio
Posts: 3,682
Bikes: Puch Marco Polo, Saint Tropez, Masi Gran Criterium
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1163 Post(s)
Liked 442 Times
in
315 Posts
A week ago I worked on my bike to remove as many of its sounds as I could... bottom bracket clicks, seat squeaks, things rattling in the toolbag, etc. The only sounds left are a quiet sound of the chain and that of the tires on the road. The last two rides I've found pleasantly astounding. The bike seems faster and yet more comfortable... probably because there are less of my senses telling me that I'm going over a bump or over a rough road. If I didn't know that I was riding the same bike, I would think that somehow I'd bought a new bike that's worth considerably more than the one I have. Is it just me, or is this something that everyone experiences?
Another interesting aspect of sorting a bike to become quieter reminds me of the audiophile hobby a bit. The more you lower the noise floor of one part the more you then notice the next noisiest part of the system. By knowing the next noisiest part, it is possible to move on to that next part and doing some problem solving to see what can be done to tighten down what is loose or lubricate what needs lubrication and so on.
And yes, I’m a chain waxer. When I get it right the drivetrain really gets quiet (at least for one or two rides). This is pretty satisfying.
#18
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
I go to great lengths to make sure all of my bikes are dead quiet: no clicks, no creaks, no chain noise -- every thread is lubed, every bolt is tight. To me, there's no bliss quite like riding a well-tuned, silent bicycle.
#19
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,958
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 989 Post(s)
Liked 883 Times
in
528 Posts
Nice work. It's all good until you encounter a rider with a bluetooth speaker blasting his or her personal soundtrack.
#20
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,232
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2590 Post(s)
Liked 5,656 Times
in
2,927 Posts
When I first purchased my new bike in 2020 it made all sorts of little rattles over bumps which drove me nuts (I like my vehicles rattle and noise free - other than the stereo). It took me a couple of weeks to locate and neutralize the rattles and what a difference! Then I decide to put new Look carbon Keo pedals on it and another bike. Whenever I was putting the power down on climbs or out of the saddle they would creak like SOBs. I took off the cleats and waxed the interface to the shoes. I took the brand new pedals apart and relubed them and then I waxed the interface between the cleats and the pedals which was a temporary fix. After researching on the net creaking noises were very common with Keos with no permanent fixes - (a few people never had creaks, which I did experience when just moving along without smashing then pedals.), plus they were a PITA to clip into until I shimmed the front-most screws. Getting fed up, I purchased Shimano pedals and have lived a happily creak-free ever after.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#21
Senior Member
I treat every noise as a lurking failure, work to get a quiet ride. Had to figure out aglets slapping against my shoes. One frustrating occasion I eventually figured out the faint click I was hearing was a knee.
#23
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,558
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4365 Post(s)
Liked 4,006 Times
in
2,675 Posts
Sounds like that should be rare on a properly maintained bike, improper maintenance will lead to loads of noise and worse. If you take care of your bike it will take care of you if you don't it will be noisy and get more and more dangerous in some cases.
I can agree with the bluetooth speaker thing but I am also a small part of that but generally I am only using the speaker while commuting and rarely see other cyclists and usually am past them rather quickly if I can (not bragging just don't like to hang around people while playing music or with the pandemic still going). If I do run across a bunch of folks I will usually turn down. I do find the music helps me be more "visible" and on frequent occasion I do get a good music reply from motorists or others. I will say no need to go crazy blasting music listen to it so you can hear it and keep an ear on stuff around you and don't play bad music...LOL
I can agree with the bluetooth speaker thing but I am also a small part of that but generally I am only using the speaker while commuting and rarely see other cyclists and usually am past them rather quickly if I can (not bragging just don't like to hang around people while playing music or with the pandemic still going). If I do run across a bunch of folks I will usually turn down. I do find the music helps me be more "visible" and on frequent occasion I do get a good music reply from motorists or others. I will say no need to go crazy blasting music listen to it so you can hear it and keep an ear on stuff around you and don't play bad music...LOL
#24
Resident PIA
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 848
Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 356 Times
in
186 Posts
Heh. I remember the first time my FD cable end got bent and was making a "tink" sound every time the crank arm hit it. Drove me crazy. Took me a while to figure out where the noise was coming from. After that, I knew the first place to look when I heard that sound again.
.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
#25
Senior Member
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
Quiet bike is a priority for me. Smooth and quiet, like a silent assassin. Except I don't kill anybody.