Do I need an aluminum frame?
#1
Junior Member
Thread Starter
Do I need an aluminum frame?
I have four vintage lightweight steel framed road bikes that I love and want to preserve / protect accordingly. This season I started riding again in earnest after a few years off, and I've noticed that after riding in conditions that are wet or even just a bit damp, I have to wipe the bike down. The last thing I want on my bikes is rust, so I'm quite stringent about keeping them clean and oiled. I suppose now that I'm older, I don't necessarily feel like cleaning my bike after ever wet or damp ride. In short, I think I might like to have an aluminum frame that I can ride in the wet and not have to worry about cleaning afterward because it won't rust.
#2
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,015
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 802 Times
in
391 Posts
Not cleaning your bike after riding in the wet will result in a dirty, poorly performing bike no matter what frame you've got. I see no advantage to the proposed tradeoff as you'll be wiping it down anyway.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Likes For Fahrenheit531:
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,441 Times
in
2,764 Posts
Sure, lots of folks have bad weather bikes. Maybe a vintage Cannondale? Set it up single speed for even less worry.
Likes For shelbyfv:
#4
Senior Member
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times
in
421 Posts
+1. I have steel and aluminum framed bikes. They all require cleaning at roughly the same interval, which is to say, rarely. In my experience, painted steel isn't terribly rust prone when it's just normal rain. Salt spray during the winter is another matter, but still, my dedicated winter bike has a steel frame and I don't clean it every day.
A bike that you don't care about so much as to keep it sparkling will solve the problem better than replacing an heirloom steel bike with an heirloom aluminum one.
A bike that you don't care about so much as to keep it sparkling will solve the problem better than replacing an heirloom steel bike with an heirloom aluminum one.
#5
Junior Member
Thread Starter
+1. I have steel and aluminum framed bikes. They all require cleaning at roughly the same interval, which is to say, rarely. In my experience, painted steel isn't terribly rust prone when it's just normal rain. Salt spray during the winter is another matter, but still, my dedicated winter bike has a steel frame and I don't clean it every day.
A bike that you don't care about so much as to keep it sparkling will solve the problem better than replacing an heirloom steel bike with an heirloom aluminum one.
A bike that you don't care about so much as to keep it sparkling will solve the problem better than replacing an heirloom steel bike with an heirloom aluminum one.
Likes For JochenRindt:
#6
Senior Member
Join Date: Jan 2010
Posts: 39,254
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18424 Post(s)
Liked 15,579 Times
in
7,337 Posts
Splurge on titanium. You can dunk the frame in the ocean and it won’t rust.
Note, however, that if you have aluminum parts touching steel parts (e.g., aluminum spacers and a steel steerer tube), you can run into serious trouble if you don’t properly grease. Ask me how I know.
Note, however, that if you have aluminum parts touching steel parts (e.g., aluminum spacers and a steel steerer tube), you can run into serious trouble if you don’t properly grease. Ask me how I know.
Last edited by indyfabz; 08-21-23 at 04:46 PM.
Likes For indyfabz:
#7
Advanced Slacker
Join Date: Feb 2017
Posts: 6,210
Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2762 Post(s)
Liked 2,537 Times
in
1,433 Posts
Unless you are getting salt on it, I would not worry about a new steel frame rusting just from getting wet or dirty. And if you do get salt on the bike, and don't wash it off, its going to wreck a bunch of other components before the frame.
Likes For Kapusta:
#8
Junior Member
Thread Starter
That's the thing- my steel frames are not new. Three of them are 1981-82, and the other is a 2002.
#9
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,547
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3674 Post(s)
Liked 5,441 Times
in
2,764 Posts
Treat the insides with Frame Saver or the more readily available Fluid Film. Also, as much stuff on the outside as you can tolerate the mess.
#10
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26425 Post(s)
Liked 10,381 Times
in
7,209 Posts
.
...I have here a Cannondale tourer and several steel frames set up with fenders..
The frames are not the problem...if you treat the interior with some m sort of oil and the paint is in good shape.
They are about equal work in terms of drying them out after rides in the rain, as far as the chain and exposed components go.
I would not buy another aluminum frame only for this purpose. But the Cannondale touring bikes are OK riding frames, if you run wide enough tires on them.
...I have here a Cannondale tourer and several steel frames set up with fenders..
The frames are not the problem...if you treat the interior with some m sort of oil and the paint is in good shape.
They are about equal work in terms of drying them out after rides in the rain, as far as the chain and exposed components go.
I would not buy another aluminum frame only for this purpose. But the Cannondale touring bikes are OK riding frames, if you run wide enough tires on them.
__________________
#11
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,483
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 968 Post(s)
Liked 1,631 Times
in
1,047 Posts
If ya need an excuse to add another bike to the stable then surely you must get an Aluminum frame. You will never have to wipe it down if you do.
OK... Now which one... Yep... Ya got a pretty nice stable to begin with...
OK... Now which one... Yep... Ya got a pretty nice stable to begin with...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
#12
Full Member
Join Date: Jul 2020
Location: Ellay
Posts: 340
Bikes: 2002 Eddy Merckx Team SC Resto-Mod; 2019 Ibis Hakka MX; 2017 Spot Brand Ajax Belt Drive
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 192 Times
in
121 Posts
If you really want a maintenance free bike (but with some performance trade-offs), get an aluminum frame with a belt drive and IGH. I have one of those for my commuter/around town bike. The IGH is a bit heavy, but the bike is basically maintenance free. You might as well get one with disc brakes too - they're better in the rain.
#13
Senior Member
Join Date: Oct 2015
Posts: 15,491
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7652 Post(s)
Liked 3,479 Times
in
1,836 Posts
Get an Al-frame, disc-equipped rain bike. All the cool kids have one. (Even uncool folk like myself own one.) IGH ... depends how much you want to spend.
As far as I know, unless you live near the ocean or in a city which salts the roads, steel isn't going to rust significantly, and a Framesaver-type internal coating can help. But, as others have said ... more bikes is better.
As far as I know, unless you live near the ocean or in a city which salts the roads, steel isn't going to rust significantly, and a Framesaver-type internal coating can help. But, as others have said ... more bikes is better.
#14
Senior Member
Join Date: Apr 2009
Posts: 940
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 380 Post(s)
Liked 541 Times
in
286 Posts
I have a 2006 Specialized Allez Elite for my go anywhere anytime bike. Like new CL buy for $200 with never one second of buyer's remorse. And it's a great ride and I never have to worry about my "good" bikes getting beat up.
Last edited by Steel Charlie; 08-22-23 at 01:54 PM.
#15
slow on any terrain
Likes For eljayski:
#16
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,331
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,839 Times
in
2,231 Posts
Rain bike - haha - yeah, I did a Pacific Northwest rain bike twice before. Each became a favorite rider and lost their mudguards. The waaay underused mountain bike got the fenders.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#18
Senior Member
Join Date: Dec 2020
Location: Los Angeles
Posts: 919
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Liked 1,045 Times
in
442 Posts
You can still get corrosion from areas where steel interfaces with the alloy frame (ex: brake mount screws). Titanium welds can crack if not done right. Given the choice, I'd rather go steel or carbon.
#19
Junior Member
Thread Starter
Likes For JochenRindt:
#20
Senior Member
Join Date: Jan 2010
Posts: 39,254
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18424 Post(s)
Liked 15,579 Times
in
7,337 Posts
See my post above. My CK aluminum headset spacers chemically fuses to the steel steering tube of my Colnago fork. A shop tried all kinds of things for several days to free the parts, partly for its own edification. It finally gave up, cut through the spacers with a Dremel tool and pried them off. That thought me a lesson about maintenance. Profuse sweating + dumping water on your head + riding in rain + no preventative maintenance=$$$
#21
Senior Member
Join Date: Sep 2017
Posts: 7,887
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6972 Post(s)
Liked 10,970 Times
in
4,692 Posts
I have four vintage lightweight steel framed road bikes that I love and want to preserve / protect accordingly. This season I started riding again in earnest after a few years off, and I've noticed that after riding in conditions that are wet or even just a bit damp, I have to wipe the bike down. The last thing I want on my bikes is rust, so I'm quite stringent about keeping them clean and oiled. I suppose now that I'm older, I don't necessarily feel like cleaning my bike after ever wet or damp ride. In short, I think I might like to have an aluminum frame that I can ride in the wet and not have to worry about cleaning afterward because it won't rust.
For what it's worth, I have a 21.5 year old steel frame that is probably lighter than any of yours, and it's been ridden over 40k miles in all sorts of weather -- rain, snow, etc. With no special care, it is still in great shape.
If you just want to buy a new bike, have at it. But your reason is not really valid.
#22
Senior Member
Join Date: Oct 2015
Posts: 15,491
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7652 Post(s)
Liked 3,479 Times
in
1,836 Posts
Lol yeah, live in the Northeast and the idea of a "winter beater" suddenly doesn't seem so odd .....
#23
Senior Member
Join Date: Dec 2020
Location: Los Angeles
Posts: 919
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Liked 1,045 Times
in
442 Posts
See my post above. My CK aluminum headset spacers chemically fuses to the steel steering tube of my Colnago fork. A shop tried all kinds of things for several days to free the parts, partly for its own edification. It finally gave up, cut through the spacers with a Dremel tool and pried them off. That thought me a lesson about maintenance. Profuse sweating + dumping water on your head + riding in rain + no preventative maintenance=$$$
#24
Senior Member
Join Date: Jan 2010
Posts: 39,254
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18424 Post(s)
Liked 15,579 Times
in
7,337 Posts
Should have mentioned that I bought my Colnago in 2001. Back then, their carbon forks were still coming with steel steerers.
#25
Senior Member
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,733
Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 781 Times
in
498 Posts
Just get use to cleaning your bike after rides.
Does not take much time and its a good way to keep running well and notice possible issues like tire wear.
Get a TI frame if you really want to avoid corrosion and rust oxidation.
Does not take much time and its a good way to keep running well and notice possible issues like tire wear.
Get a TI frame if you really want to avoid corrosion and rust oxidation.