Carbon Seat Rails.
#1
Full Member
Thread Starter
Carbon Seat Rails.
Carbon seat rails are becoming more and more common. They have now reached the stage where they are normal. I weigh about 200 lbs and am 6'4". The other day I hit a bump along a paved trail and the rails broke and the saddle fell off. I am now back to steel or titanium rails though I prefer steel.
#2
Senior Member
Join Date: Sep 2017
Posts: 7,900
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6979 Post(s)
Liked 10,976 Times
in
4,696 Posts
Carbon seat rails are becoming more and more common. They have now reached the stage where they are normal. I weigh about 200 lbs and am 6'4". The other day I hit a bump along a paved trail and the rails broke and the saddle fell off. I am now back to steel or titanium rails though I prefer steel.
2) What kind of seatpost -- specifically, what sort of clamp?
3) Did you use a torque wrench to install the saddle?
Likes For Koyote:
Likes For phughes:
#5
Senior Member
Join Date: Oct 2015
Posts: 15,496
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7653 Post(s)
Liked 3,485 Times
in
1,840 Posts
CF seat rails have been supporting my ginormous mass for quite a few years now but I am sure if I really slammed down vertically ... I mean, anything can fail.
I crossed paths with an MTB rider who had sheared his aluminum seat post. It was a lot more sturdy than my saddle rails.
I crossed paths with an MTB rider who had sheared his aluminum seat post. It was a lot more sturdy than my saddle rails.
#6
Senior Member
Join Date: Jul 2009
Posts: 5,956
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3959 Post(s)
Liked 7,314 Times
in
2,951 Posts
Likes For tomato coupe:
#7
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 8,004
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4959 Post(s)
Liked 8,107 Times
in
3,837 Posts
Likes For Eric F:
#8
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,385
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2490 Post(s)
Liked 2,961 Times
in
1,682 Posts
#10
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 12,250
Bikes: Shmikes
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 10176 Post(s)
Liked 5,873 Times
in
3,161 Posts
Saw a female sprinter break her saddle off in a track competition. That was more about force than mass I’m guessing, but maybe I’m imputing too much competence to her mechanic.
#11
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,572
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 3684 Post(s)
Liked 5,453 Times
in
2,771 Posts
Good thing you were wearing a helmet!
Likes For shelbyfv:
#12
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,911
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,933 Times
in
2,558 Posts
Serious question - does that seatpost have sharp or near sharp edges to the rail clamps? Especially at the bottom shelf, front and rear. I don't know but I am guessing that a sharp edge would raise the local stress in the saddle rails considerably. Also, was any of the turn up of the rail inside the clamp? Also a stress raiser. I've broken ti rails on both of these.
Likes For 79pmooney:
#13
Senior Member
Join Date: Sep 2017
Posts: 7,900
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6979 Post(s)
Liked 10,976 Times
in
4,696 Posts
Likes For Koyote:
#15
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,233
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2593 Post(s)
Liked 5,669 Times
in
2,929 Posts
Bought a set of wheels that came with carbon spokes - three years and no assplosions even after some heavy pothole hits. But they did provide replacements, just in case.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
#16
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,692
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 432 Post(s)
Liked 461 Times
in
318 Posts
A few of my saddles have carbon rails and while I've not broken anything I am slightly unconfident. Seems like the potential for user error during installation is higher than with metal rails. Even using a torque wrench I can't help but feel nervous. And the oval rails means one needs to be really attentive to ensure their their seat post clamps are appropriate. So far so good, though.
#17
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,233
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2593 Post(s)
Liked 5,669 Times
in
2,929 Posts
Bring a whole new meaning to the phrase, “Oh snap!”
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
#18
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,644
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4741 Post(s)
Liked 1,534 Times
in
1,005 Posts
Completely unfounded, but if I bothered to get a carbon railed saddle, I do believe I'd be less wary if my saddle clamp was of the style that has a longer platform that the rails sit within (left example?), versus the style that looks more like teeth (eg. middle example).
Likes For Sy Reene:
#19
Senior Member
Join Date: Sep 2017
Posts: 7,900
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6979 Post(s)
Liked 10,976 Times
in
4,696 Posts
Completely unfounded, but if I bothered to get a carbon railed saddle, I do believe I'd be less wary if my saddle clamp was of the style that has a longer platform that the rails sit within (left example?), versus the style that looks more like teeth (eg. middle example).
Actually, you've got it backwards: most cf saddle rails are oval-shaped (7x9mm or occasionally 7x10mm), and the horizontal clamp style in the left-most photo will work ONLY if it is specifically designed for the size and shape of those rails. The vertical clamps in the middle and right-most photo will generally be fine with any saddle rails.
But regardless, this OP is a junk post. The poster has been back to bf but not to this thread, even though questions have been raised. It's just another anti-cf troll post. This person has probably never seen a cf-railed saddle, much less owned one.
Likes For Koyote:
#20
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,911
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,933 Times
in
2,558 Posts
Completely unfounded, but if I bothered to get a carbon railed saddle, I do believe I'd be less wary if my saddle clamp was of the style that has a longer platform that the rails sit within (left example?), versus the style that looks more like teeth (eg. middle example).
#21
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
#22
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,403
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,702 Times
in
2,522 Posts
I have a saddle with crabon rails, and it has a warning sticker only to use it on a road bike, no off-road. It matches the paint job of my gravel bike, so that's a bummer. Probably going to use it on my trainer. Ugliest Fizik ever made, but I got a deal on it.
Likes For unterhausen:
#23
Senior Member
Join Date: Jul 2009
Posts: 5,956
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3959 Post(s)
Liked 7,314 Times
in
2,951 Posts
#24
Senior Member
Join Date: Sep 2017
Posts: 7,900
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6979 Post(s)
Liked 10,976 Times
in
4,696 Posts
The left clamp is what I was asking about in my earlier post. The clamp edge being into the start of the turn of the rails. CF doesn't "flow" at all so the concentrated force at that clamp edge will never dissipate. I asked the OP if this was the case so we could all learn but I suspect the hostile replies drove him off.
Oh, and RiceAWay has a history of anti-cf posts; do you really think a person who regularly rants against cf bikes would own a cf saddle?
Again, I'm happy to be proved wrong. All it will take is a photo of this miraculous saddle failure.
#25
Junior Member
2-3 nm torque, RXL carbon saddle and seat post, 175 lb rider on pretty even roads.