Cracked headtube on Aluminum Frame?
#1
Junior Member
Thread Starter
Join Date: Oct 2020
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Cracked headtube on Aluminum Frame?
Almost bought a current aluminum frame bike that has cracks in the head tube coming from top and bottom of the tube on the same side.
Question one, is it repairable?
Question two, what could have caused this? There doesn't appear to any other damage to the bike, but the fork "could" have been replaced.
Not planning on buying the bike but the (second) owner is a friend .
Question one, is it repairable?
Question two, what could have caused this? There doesn't appear to any other damage to the bike, but the fork "could" have been replaced.
Not planning on buying the bike but the (second) owner is a friend .
#2
Senior Member
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,991
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26451 Post(s)
Liked 10,408 Times
in
7,226 Posts
Almost bought a current aluminum frame bike that has cracks in the head tube
#5
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,677
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,754 Times
in
941 Posts
The crack(s) is probably caused by improper bearing cup and/or cone insertion. If there are cracks, welding can be a problem solver but the process for alloy is complicated, costly and lacking in eye appeal. I agree with other's comments. Pass on the bike or use it for display. Riding it could spell disaster in the form of a crash should the assembly fail completely.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#7
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 656 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,040 Times
in
1,878 Posts
Likely, it missed the head tube reaming operation before the lower headset cup and upper headset cone race were pressed into place. As noted, it's repairable but probably not economically feasible.