Need a tail light that uses regular batteries
#1
Full Member
Thread Starter
Join Date: Sep 2017
Location: Maryland
Posts: 368
Bikes: Diamondback Haanjo Trail, Fuji Team Road
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 68 Times
in
46 Posts
Need a tail light that uses regular batteries
My cheapo Planet Bike rear light jumped off the bike today and was crushed by our follow car. I need a new tail light that uses AAA batteries because none of the new lithium USB tail lights can be shipped to me. I can buy it through Amazon or eBay. Any suggestions?
Thanks,
Paul
Thanks,
Paul
#2
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,625
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1668 Post(s)
Liked 1,820 Times
in
1,058 Posts
I like my Cateye Reflex Auto. 2xAAA, large area for visibility, also meets reflector standards. Cateye offers mounts for seatpost, seatstay and rear rack.
#4
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,625
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1668 Post(s)
Liked 1,820 Times
in
1,058 Posts
'Battery', like AA or AAA?
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
Last edited by tcs; 01-09-22 at 05:00 PM.
#5
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,206
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3460 Post(s)
Liked 1,466 Times
in
1,144 Posts
I have had very good luck with Planet Bike Superflash and Planet Bike Superflash 65 taillights, for me they do not jump out of the holder.
I use rechargeable AAA batteries, NiMH. Eneloop batteries are good and Amazon carries them, but you also need a recharger.
I use rechargeable AAA batteries, NiMH. Eneloop batteries are good and Amazon carries them, but you also need a recharger.
Likes For Tourist in MSN:
#6
Time Traveler
Join Date: Jan 2022
Location: Florida, USA
Posts: 326
Bikes: 1983 Ross Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 204 Post(s)
Liked 98 Times
in
51 Posts
'Battery', like AA or AAA?
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
#7
Time Traveler
Join Date: Jan 2022
Location: Florida, USA
Posts: 326
Bikes: 1983 Ross Paragon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 204 Post(s)
Liked 98 Times
in
51 Posts
'Battery', like AA or AAA?
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
The gold standard was the now discontinued B&M Ixon IQ, 4xAA. A few are still available here and there; get 'em before they're gone.
Still available is the less impressive but okay Cateye GVolt25C, 3xAAA.
There's the Fenix BC30 V2.0, 2x 18650 or 4x CR123A. You can practically arc weld with one of those.
Is this it?
Amazon.com : Busch & Müller Headlight Lumotec IQ-X Black, 164RTSNDI-01 : Sports & Outdoors
or this one
Busch&Muller Ixon IQ Premium Front Light Black, Bikeinn
#8
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,479
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 966 Post(s)
Liked 1,629 Times
in
1,045 Posts
I recently went through a search of battery powered tail lights and it looks like the "Cat Eye Omni3" is as good as you can get using two AAA batteries. I use rechargeable batteries and keep a fresh set of Alkalines in my tool pouch.
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Likes For zandoval:
Likes For pennpaul:
#10
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
glad you found something, when my PBs die I might be replacing them, even tho I've found them durable. I've still got 3 so it may be a while. but I do use an elastic to keep them from hopping their mount. been there/done that, no fun
#11
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,625
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1668 Post(s)
Liked 1,820 Times
in
1,058 Posts
#12
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,625
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1668 Post(s)
Liked 1,820 Times
in
1,058 Posts
#13
Zoom zoom zoom zoom bonk
Join Date: Sep 2006
Location: New Zealand
Posts: 4,624
Bikes: Giant Defy, Trek 1.7c, BMC GF02, Fuji Tahoe, Scott Sub 35, Kona Rove, Trek Verve+2
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 551 Post(s)
Liked 722 Times
in
366 Posts
The cateye rapid 3 is a good option if you can find it too. Single AA.
#14
Full Member
Thread Starter
Join Date: Sep 2017
Location: Maryland
Posts: 368
Bikes: Diamondback Haanjo Trail, Fuji Team Road
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 68 Times
in
46 Posts
I used to do that, too, because the red plastic cover would pop off the base but the base never actually came off the mount. I moved the light to my road bike last night and wrapped the perimeter of the cover and the base with electrical tape. However, the rubber band didn't make it. Mistake.
#15
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
I used to do that, too, because the red plastic cover would pop off the base but the base never actually came off the mount. I moved the light to my road bike last night and wrapped the perimeter of the cover and the base with electrical tape. However, the rubber band didn't make it. Mistake.
#16
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,206
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3460 Post(s)
Liked 1,466 Times
in
1,144 Posts
I do not have trouble with the two halves of a Planet Bike light coming apart either. They are made with good tolerances, but I can see were after swapping batteries hundreds of times, they might get worn and loose.
I had some cheap copies of planet bike superflash lights, on those I had corroding parts from getting wet in rain and one of those came apart and half was lost. But those were cheap copies.
When you see your light is dim, with AAA batteries you can swap them out for either new or re-charged ones and get back out on the road again. I recall once accidently leaving my taillight on and the batteries were shot when it was time to ride home from work in the dark. A quick trip into a Walgreens for some new (and over-priced because of the store) AAA batteries and I was safe to go home.
And my Planet Bike Superflash lights will last longer than most Li Ion batteries do, I hate throwing out good devices when the proprietary battery no longer works. Some of my taillights that are over ten years old still work just fine.
Bike touring usually have one taillight flashing all the time, I recharge my AAA taillight batteries weekly even if they are still bright to make sure they stay bright, have two on the back of my bike.
I had some cheap copies of planet bike superflash lights, on those I had corroding parts from getting wet in rain and one of those came apart and half was lost. But those were cheap copies.
And my Planet Bike Superflash lights will last longer than most Li Ion batteries do, I hate throwing out good devices when the proprietary battery no longer works. Some of my taillights that are over ten years old still work just fine.
Bike touring usually have one taillight flashing all the time, I recharge my AAA taillight batteries weekly even if they are still bright to make sure they stay bright, have two on the back of my bike.
Likes For Tourist in MSN:
#17
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
#18
Senior Member
Join Date: Jul 2008
Location: Minneapolis, MN
Posts: 6,432
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 44 Times
in
38 Posts
Bit of a side topic, but I had a rear light that did this once, I fixed it by superglueing it to it's mount.
Batteries could be removed without taking the light off the bike.
If you needed to get rid of the light you could still do it by just removing the entire mount.
That's a bummer, I gave up on AA rear lights when I arrived home several times to find the battery had jostled itself out it's contacts and the light wasn't working.
Battery was still in the light but it was providing no power.
Builtin lithions don't do that so I switched.
Also since I keep my bike in the garage I just put the usb-charger next to the bike and hook it up after every time I'm done riding. Light is always charged, no more hassle of taking out and charging batteries.
Batteries could be removed without taking the light off the bike.
If you needed to get rid of the light you could still do it by just removing the entire mount.
Battery was still in the light but it was providing no power.
Builtin lithions don't do that so I switched.
Also since I keep my bike in the garage I just put the usb-charger next to the bike and hook it up after every time I'm done riding. Light is always charged, no more hassle of taking out and charging batteries.
Likes For PaulRivers:
#19
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
Two wraps of electrical tape around the TurboFlash mount eliminates the possibility of it jumping off. It is the best AAA replaceable light out there, still.
#20
Senior Member
Join Date: Feb 2008
Location: Peoria, IL
Posts: 4,476
Mentioned: 86 Post(s)
Tagged: 0 Thread(s)
Quoted: 1829 Post(s)
Liked 3,375 Times
in
1,580 Posts
I love my Rapid 3 lights! Plenty bright, runs a long time, just one battery to mess with. Plus, Cateye sells a ton of different mounting brackets, which are on all of my bikes, and you can buy the brackets from Cateye.
I'm sure they will wear out some day, or just get lost, but until then, I'm quite pleased.
Steve in Peoria
I'm sure they will wear out some day, or just get lost, but until then, I'm quite pleased.
Steve in Peoria
#21
Senior Member
Join Date: Sep 2005
Location: Michigan
Posts: 3,706
Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 336 Times
in
251 Posts
This does not pertain to the original issue, but rechargeable lithium AAA and AA are now available. Their capacity is lower than NiMH, given the internal circuitry that takes space. However, they provide stable 1.5V voltage and are far less vulnerable to low temp than NiMH. I switched to those for the bike and do not look back.
Likes For 2_i:
#22
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,206
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3460 Post(s)
Liked 1,466 Times
in
1,144 Posts
This does not pertain to the original issue, but rechargeable lithium AAA and AA are now available. Their capacity is lower than NiMH, given the internal circuitry that takes space. However, they provide stable 1.5V voltage and are far less vulnerable to low temp than NiMH. I switched to those for the bike and do not look back.
Since you are using these, do you find much warning before you run out of power? With disposable or NiMH AAA batteries in my taillight, it gets dim as a warning that the batteries are getting low. But if the Lithium ones provide full power until they shut off, I would be hesitant to use for a taillight where I might not be aware that I no longer had a light on.
Touring, I charge up my taillight batteries once a week, I do not wait for them to get dim. But for my many bikes that I use for riding around near home I do not keep track of how many hours of use I have on each taillight, I wait for them to get dimmer.
So, could you elaborate on whether or not there is any warning before the batteries stop functioning, and if so, what is that warning like?
Thanks.
#23
Senior Member
Join Date: Sep 2005
Location: Michigan
Posts: 3,706
Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 336 Times
in
251 Posts
Thanks for posting. I was unaware of such batteries. Did some internet searches and found that yes they are out there. Some on Amazon needed their own proprietary charger but one brand had what looked like a micro USB jack for charging each battery without a separate charger.
Since you are using these, do you find much warning before you run out of power? With disposable or NiMH AAA batteries in my taillight, it gets dim as a warning that the batteries are getting low. But if the Lithium ones provide full power until they shut off, I would be hesitant to use for a taillight where I might not be aware that I no longer had a light on.
Touring, I charge up my taillight batteries once a week, I do not wait for them to get dim. But for my many bikes that I use for riding around near home I do not keep track of how many hours of use I have on each taillight, I wait for them to get dimmer.
So, could you elaborate on whether or not there is any warning before the batteries stop functioning, and if so, what is that warning like?
Thanks.
Since you are using these, do you find much warning before you run out of power? With disposable or NiMH AAA batteries in my taillight, it gets dim as a warning that the batteries are getting low. But if the Lithium ones provide full power until they shut off, I would be hesitant to use for a taillight where I might not be aware that I no longer had a light on.
Touring, I charge up my taillight batteries once a week, I do not wait for them to get dim. But for my many bikes that I use for riding around near home I do not keep track of how many hours of use I have on each taillight, I wait for them to get dimmer.
So, could you elaborate on whether or not there is any warning before the batteries stop functioning, and if so, what is that warning like?
Thanks.
From the choices, there is one type, Pallus/Kratax/Hixon, that can be charged by connecting them to anything from 3V to 5.5V, i.e., they can be charged straight from USB. However, you do not have suitable connectors around for the task. I found those with USB micro sockets to be most practical, as you always have the corresponding cables around anyway. In AA size, the Vapcell seem to be the best in the on-line tests. In AAA, Powenergy have worked fine for me. The real capacity is usually 10-15% below that claimed for the different batteries in this type.
#24
Senior Member
Join Date: Feb 2006
Location: Sin City, Nevada
Posts: 2,886
Bikes: Catrike 700, Greenspeed GTO trike, , Linear LWB recumbent, Haluzak Horizon SWB recumbent, Balance 450 MTB, Cannondale SM800 Beast of the East
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Likes: 0
Liked 229 Times
in
181 Posts
See private message I sent you for a possible way to have a rechargeable light that is sent without batteries. i would never again use a light that uses standard batteries.
#25
Arizona Dessert
Join Date: Jun 2004
Location: AZ
Posts: 15,030
Bikes: Cannondale SuperSix, Lemond Poprad. Retired: Jamis Sputnik, Centurion LeMans Fixed, Diamond Back ascent ex
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 5345 Post(s)
Liked 2,169 Times
in
1,288 Posts
Note that while the 65 may have more lumens than the Superflash Turbo it's beam pattern is ring shaped and super wide meaning most of the light does not direct toward any person behind the cyclist. Side by side comparison the older Turbo is much more visible. I sent the 65 back.