In Need of Repair and/or Marriage Guidance
#1
Junior Member
Thread Starter
Join Date: Sep 2016
Location: Gulf Coast
Posts: 183
Bikes: '93 Cannondale R500; '88 Centurion Ironman Expert, '97 Cannondale R900, '95 Serotta CSI, '83 Trek 700, '97 Lemond Zurich, '89 Bianchi Giro, '87 Schwinn Prologue, '83 Fuji TSIV + one perturbed wife
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 71 Post(s)
Liked 154 Times
in
58 Posts
In Need of Repair and/or Marriage Guidance
Well, I got home today and noticed that the RB-1 was balanced straight up against the wall without a single degree of lean into the wall. Figuring the wife (whom I love) moved it for some reason, I scampered over to properly re-position it more securely and get it tucked back into its corner of the room. Upon turning the bike around, I saw a paint scuff in the semi-dark room and placed my hand on the scuff only to discover in my horror......(Have I mentioned that I love my wife?).......
What was once a very nice (not perfect) '92 RB-1 with just a few scratched decals now has a dent on the top tube. She confessed that "it fell over". Having repeated over and over my new mantra for the last few hours "I love my wife" to avoid saying something that I would regret later, I'm now at the point of trying to deal with it. I've never dealt with this aspect of bike maintenance / repair. I've done some minor paint work but not metal. Recalling some threads I've read in the past, I'm thinking that I can get "tube blocks" and start working the tube back into shape. The dent is slightly under half inch long and is just shy of being creased but still feels mostly smooth. What I mean by the crease in the bottom of the dent, there is not a sharp line in the dent but with a little more force it probably would been. I know the original paint is toast if I use blocks but I would rather have the tube back in shape and match the paint as best as I can than to look down at a dent or a sticker covering it up. Whether with a dent or touched up paint, the value of its "originality" is gone at this point. (HOLD ON A MINUTE: I LOVE MY WIFE, I LOVE MY WIFE.... Ok, I'm back.)
So where do I start? What's the best that I could hope for in using the blocks on the dent? How do I work the blocks? What are the obstacles, pros & cons, etc.? I'll start looking for the blocking threads on the forum over the next few days to start learning about the process but any guidance, sympathy or humor to shorten this learning curve and hasten the healing process would be appreciated. (I love my wife, I love my wife, I love my wife,....). SIGH.
What was once a very nice (not perfect) '92 RB-1 with just a few scratched decals now has a dent on the top tube. She confessed that "it fell over". Having repeated over and over my new mantra for the last few hours "I love my wife" to avoid saying something that I would regret later, I'm now at the point of trying to deal with it. I've never dealt with this aspect of bike maintenance / repair. I've done some minor paint work but not metal. Recalling some threads I've read in the past, I'm thinking that I can get "tube blocks" and start working the tube back into shape. The dent is slightly under half inch long and is just shy of being creased but still feels mostly smooth. What I mean by the crease in the bottom of the dent, there is not a sharp line in the dent but with a little more force it probably would been. I know the original paint is toast if I use blocks but I would rather have the tube back in shape and match the paint as best as I can than to look down at a dent or a sticker covering it up. Whether with a dent or touched up paint, the value of its "originality" is gone at this point. (HOLD ON A MINUTE: I LOVE MY WIFE, I LOVE MY WIFE.... Ok, I'm back.)
So where do I start? What's the best that I could hope for in using the blocks on the dent? How do I work the blocks? What are the obstacles, pros & cons, etc.? I'll start looking for the blocking threads on the forum over the next few days to start learning about the process but any guidance, sympathy or humor to shorten this learning curve and hasten the healing process would be appreciated. (I love my wife, I love my wife, I love my wife,....). SIGH.
Likes For Triplecrank92:
#2
Senior Member
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,070
Mentioned: 201 Post(s)
Tagged: 0 Thread(s)
Quoted: 3018 Post(s)
Liked 3,844 Times
in
1,418 Posts
meh. I've seen worse.
Likes For iab:
#3
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,016
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 802 Times
in
391 Posts
Dents suck and you're right, it'll never be the same. These things happen. Looks like you have one or two others to ride while you sort this one out, so yeah. You'll live.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
#4
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,964
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 118 Post(s)
Tagged: 0 Thread(s)
Quoted: 1312 Post(s)
Liked 1,926 Times
in
1,150 Posts
Create some hardwood blocks and try those, they should be gentle on the paint. As a golf professional I often have to remind players that a few dings and dents are just battle scars that are incurred in the daily use of clubs. Same goes for bikes, You now have a bike that shows how much you really care for it despite a bit of a ding. Would you feel the same had you come home to find your wife had broken her arm trying to save the bike from falling? Smiles, CrapMaster Honk
Likes For Mad Honk:
#5
Senior Member
Using blocks will require repaint in that area, I would be tempted to McGuyver up an electromagnet dent puller before resorting to blocks. Even before that I would polish out the white (paint?) transfer and reassess the dent.
Love is infinitly more valuable all Bridgestones combined. You are a lucky man.
Love is infinitly more valuable all Bridgestones combined. You are a lucky man.
__________________
I.C.
I.C.
Likes For Insidious C.:
Likes For C9H13N:
#7
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,794
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1258 Post(s)
Liked 3,615 Times
in
1,440 Posts
Cut it out, then you won't have to look at it anymore
I get it, if that happened to any of my bikes I'd be pretty sad.
Life isn't perfect, in bikes or marriage. We all take our hits. If you can live with it, it will ride exactly the same, just won't sell for the same as it currently sits. if you never planned to sell, well there you go.
There are ways to fix. But I don't think there is a cheap route. Repaint is what is gonna hurt.
I get it, if that happened to any of my bikes I'd be pretty sad.
Life isn't perfect, in bikes or marriage. We all take our hits. If you can live with it, it will ride exactly the same, just won't sell for the same as it currently sits. if you never planned to sell, well there you go.
There are ways to fix. But I don't think there is a cheap route. Repaint is what is gonna hurt.
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
#8
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,752
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3236 Post(s)
Liked 3,883 Times
in
1,443 Posts
I agree with @Insidious C. on this. It's hard to say from the picture, but the dent doesn't look very deep and you might be able to buff out the scratches. Frame blocks would minimize the dent but it'll be hard to match the paint well enough to look even as good as it does now.
#9
Senior Member
Join Date: Jan 2016
Posts: 3,475
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 883 Post(s)
Liked 2,311 Times
in
1,292 Posts
That is hard to get past. It really doesn’t hurt the integrity as it is fairly minor. I’m sure you’ll find a way to minimize the appearance with repair. So far, it seems that you have the right attitude. I have been married 48 years and my wife has done some things to my bike area with the plan to make my life better but has fallen short. I have done the same with some of her things and she has taken it better than I do.
#10
Senior Member
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 911
Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 310 Post(s)
Liked 680 Times
in
332 Posts
This is why bikes should have kickstands.
Likes For albrt:
#11
Cantilever believer
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,623
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 554 Post(s)
Liked 1,918 Times
in
862 Posts
40+ years ago, an also-impoverished racing teammate of mine bought a used Colnago at a remarkably good price.
Not long after he purchased it, he decided to see if he could clean up the messy paint. He started sanding and stripping... and discovered all the Bondo that a previous owner had used to restore the tubes' shape, if not necessarily their integrity.
He rode it for years afterward. Made for a good story, and a decent bike.
Not long after he purchased it, he decided to see if he could clean up the messy paint. He started sanding and stripping... and discovered all the Bondo that a previous owner had used to restore the tubes' shape, if not necessarily their integrity.
He rode it for years afterward. Made for a good story, and a decent bike.
#12
Senior Member
Join Date: Aug 2017
Location: Minneapolis
Posts: 938
Bikes: 1968 Raleigh Super Course, 1972 Raleigh Professional, 1975 Raleigh International, 1978 Raleigh Professional, 1985 Raleigh Prestige, 1972 Schwinn Paramount, 1980 Schwinn Voyageur 11.8, 1960 Carlton Franco Suisse Peugeot PX10, 1972 Motobecane Le Champ
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 323 Post(s)
Liked 690 Times
in
351 Posts
Glad to hear that you have a wife whom you love. Put a heart sticker over the dent and write your anniversary date on it, I’d dent every bike I have to be able to do that. Congratulations, you’re one of the lucky ones!
Last edited by Pcampeau; 05-23-23 at 09:49 PM.
#13
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,664 Times
in
1,682 Posts
If you use blocks then Bondo or jb weld, take the bike to a real paint store and get a good match for touch up. It won't be perfect but it will be nice. Also, this is the price of bikes in the house. She's a good woman. Who else would put up with a bike nut.
Likes For 52telecaster:
#14
Junior Member
Thread Starter
Join Date: Sep 2016
Location: Gulf Coast
Posts: 183
Bikes: '93 Cannondale R500; '88 Centurion Ironman Expert, '97 Cannondale R900, '95 Serotta CSI, '83 Trek 700, '97 Lemond Zurich, '89 Bianchi Giro, '87 Schwinn Prologue, '83 Fuji TSIV + one perturbed wife
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 71 Post(s)
Liked 154 Times
in
58 Posts
Dear BF Members Who-So-Kindly-Replied-Above,
It's come to my attention, given the replies, that I may not have applied the correct "context" for my original post, aka "therapy". So, in tapping the brakes and throwing the truck in reverse (make those beeping noises now!), let me set the record straight and say that, yes, I am a lucky man and have been happily married to my soul mate for 35 years who both have been quoting the Talking Head's "Naive Melody" line to each other for those 35 years "Love me til my heart stops, love me til I'm dead". And that line will probably be engraved on our tombstones.
Now, let me also say that I'm also a jokester, love the witty pun and Dave Barry is one of my favorite writers such that the sub-script on my side of the tombstone will say something like "And the one laying to my right, put me here....because she dented the top tube on my RB-1!" (Tap the brakes again.....just kidding.)
YES, as I sing the Talking Heads out loud!
(Channeling Mr. Barry now)
"What? You sacrificed your body by tossing yourself across the room to save the RB-1 from falling against the chair? Did I say, "That I Love My Wife"?
So, now I can say, "Thank You All". I've gotten this out of my system, didn't say anything regrettable in the moment and am feeling much better now. I'm ready to get off the couch. "How much do I owe you, Doctor?" Now on to new projects and challenges that life has tossed in my path, (like how to fix a dented top tube). Sigh...(but still in love and happily married)
It's come to my attention, given the replies, that I may not have applied the correct "context" for my original post, aka "therapy". So, in tapping the brakes and throwing the truck in reverse (make those beeping noises now!), let me set the record straight and say that, yes, I am a lucky man and have been happily married to my soul mate for 35 years who both have been quoting the Talking Head's "Naive Melody" line to each other for those 35 years "Love me til my heart stops, love me til I'm dead". And that line will probably be engraved on our tombstones.
Now, let me also say that I'm also a jokester, love the witty pun and Dave Barry is one of my favorite writers such that the sub-script on my side of the tombstone will say something like "And the one laying to my right, put me here....because she dented the top tube on my RB-1!" (Tap the brakes again.....just kidding.)
"What? You sacrificed your body by tossing yourself across the room to save the RB-1 from falling against the chair? Did I say, "That I Love My Wife"?
So, now I can say, "Thank You All". I've gotten this out of my system, didn't say anything regrettable in the moment and am feeling much better now. I'm ready to get off the couch. "How much do I owe you, Doctor?" Now on to new projects and challenges that life has tossed in my path, (like how to fix a dented top tube). Sigh...(but still in love and happily married)
#15
Steel is real
Join Date: May 2016
Location: Stockholm, Sweden
Posts: 1,110
Bikes: 40 - accumulated over 40 years
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 379 Post(s)
Liked 1,107 Times
in
309 Posts
On a more practical note. As I have quite a few bikes that could fall over I bought a load of these display bike holders. They keep them upright, the front wheel straight and the whole bike up from the floor. Which means I can vaccum under them with ease. The last also good marriage-wise.
#16
Junior Member
Find a paintless dent repair company in your area. One just might be able to fix your woes.
Likes For BTinNYC:
#20
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,040
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 324 Post(s)
Liked 872 Times
in
454 Posts
I felt a disturbance in the Force. This dent must have been it.
I hope you get it fixed to your liking.
I hope you get it fixed to your liking.
Likes For RB1-luvr:
#21
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,589
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5234 Post(s)
Liked 3,602 Times
in
2,356 Posts
#22
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,461
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4251 Post(s)
Liked 2,965 Times
in
1,821 Posts
Bummer.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#23
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,709
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1624 Post(s)
Liked 2,655 Times
in
1,249 Posts
Likes For curbtender:
#24
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,709
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1624 Post(s)
Liked 2,655 Times
in
1,249 Posts
I believe Sheldon Brown has an article about using blasting caps in the tubes to round them back out.
#25
ignominious poltroon
Join Date: Jan 2022
Posts: 4,109
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2270 Post(s)
Liked 3,487 Times
in
1,831 Posts
Likes For Polaris OBark: