More gasoline on the fire - Electronic Shifting
#376
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
So verbose and comical.
Why do you need to charge a bike or download an app to ride a bike? Do you also have to get software updates? Are there microtransactions involved? What happens when the OS is no longer supported? Can you tinker with it, or do you have to give the mechanic a headache?
Why do you need to charge a bike or download an app to ride a bike? Do you also have to get software updates? Are there microtransactions involved? What happens when the OS is no longer supported? Can you tinker with it, or do you have to give the mechanic a headache?
#377
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,374
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2483 Post(s)
Liked 2,955 Times
in
1,678 Posts
It's been a while since I've been here. The Borg hive mind is still the same. Especially in the roadie forum. So tasty.
Never change, Bikeforums.
https://youtube.com/shorts/sygwneT1IyA?feature=share
Never change, Bikeforums.
https://youtube.com/shorts/sygwneT1IyA?feature=share
Likes For Trakhak:
#378
Senior Member
Join Date: May 2021
Location: San Francisco
Posts: 2,039
Bikes: addict, aethos, creo, vanmoof, sirrus, public ...
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1279 Post(s)
Liked 1,393 Times
in
711 Posts
you just get on the bike and ride it, like any other bike. except it always shifts perfectly.
__________________
#379
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,374
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2483 Post(s)
Liked 2,955 Times
in
1,678 Posts
It's been a while since I've been here. The Borg hive mind is still the same. Especially in the roadie forum. So tasty.
Never change, Bikeforums.
https://youtube.com/shorts/sygwneT1IyA?feature=share
Never change, Bikeforums.
https://youtube.com/shorts/sygwneT1IyA?feature=share
#381
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,996
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4954 Post(s)
Liked 8,095 Times
in
3,831 Posts
All my bikes are still mechanical shifting, but I've been shopping for an AXS upgrade for my MTB. I would like to go Di2 for my road bike, but that's a bigger challenge since it's currently Campy. My gravel bike, however, will probably stay mechanical.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#382
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
The only time I needed the SRAM AP was to configure the 12 speed AXS Blipbox to use on a 11 Speed Etap rig. Otherwise, never needed it. The old etap blipbox had fragile connectors. Yes, I broke one
#383
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,663
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1948 Post(s)
Liked 1,471 Times
in
1,020 Posts
Why? I think e-shifting may be more beneficial for the more challenging terrain in gravel riding than for road riding. E-shifting is also cheaper for 1X. And if the road bike snaps a RD shift cable, I can call my wife or Uber XL. If the gravel bike snaps a RD shift cable, I may have to walk a while before I can get a ride.
#384
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,996
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4954 Post(s)
Liked 8,095 Times
in
3,831 Posts
Why? I think e-shifting may be more beneficial for the more challenging terrain in gravel riding than for road riding. E-shifting is also cheaper for 1X. And if the road bike snaps a RD shift cable, I can call my wife or Uber XL. If the gravel bike snaps a RD shift cable, I may have to walk a while before I can get a ride.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#385
Senior Member
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,547
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1529 Post(s)
Liked 718 Times
in
510 Posts
It's pretty cool in a couple of ways, ie working flawlessly with no maintenance, and nifty features like synchro and programmable buttons, but like I tried to assert earlier, it's also missing something.
I thought I made a half-decent attempt at trying to explain it with the tactile purity thing, but folks only wanted to quibble. But I'm fairly sure anyone actually wanting to understand can get the gist.
My 9070 bike is pretty damn sweet; I went the hack on a 2006 frame to hide Di2 inside it all the way, with cable hangers all shaved. But I'd actually prefer 9000 on a frame as nice as mine (the first ISP TCR), with internal cable routing, properly implemented.
I was a mechanic for a while, and I can tell you that last part - not very much of a thing, unfortunately. Plenty of half-alright, and a bit of downright terrible out there, not a whole lot of proper to be had when it comes to internal cable routing.
That's a big selling point for electronic, one of the best reasons - otherwise high performance bike totally let down by corners cut inside. Looking squarely at you, first generation Propel.
#386
Fat n slow
Join Date: Oct 2013
Location: Saratoga, NY
Posts: 4,302
Bikes: Cervelo R3, Giant Revolt
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3259 Post(s)
Liked 2,085 Times
in
979 Posts
I will be drawing the line at, "I can't ride my bike today because it won't connect to the internet." We're not there yet, but it's coming soon (probably).
All my bikes are still mechanical shifting, but I've been shopping for an AXS upgrade for my MTB. I would like to go Di2 for my road bike, but that's a bigger challenge since it's currently Campy. My gravel bike, however, will probably stay mechanical.
All my bikes are still mechanical shifting, but I've been shopping for an AXS upgrade for my MTB. I would like to go Di2 for my road bike, but that's a bigger challenge since it's currently Campy. My gravel bike, however, will probably stay mechanical.
I use the phone app every time I take my bike off of the trainer to re-index for my wheels. 3 pushes of an arrow and it’s all set. If I forget I can do it while riding and never get off the bike- can’t do that with mechanical.
Likes For phrantic09:
#387
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
The problem I have with the tactile feel argument is that there's nothing particularly great about the tactile feel of a road brifter. Moving to electronic shifting just highlighted to me how naff it is to have a floppy brake lever. You might just be able to sell me on a mechanical mtb trigger shifter, or even an old-school indexed DF shifter, but even then the click of a shifter is not something that really enhances my biking experience. So I'll take that loss (if that's what we are calling it) over the hassle of cables.
#388
Senior Member
Join Date: Jul 2019
Location: In the south but from North
Posts: 700
Bikes: Turner 5-Spot Burner converted; IBIS Ripley, Specialized Crave, Tommasini Sintesi, Cinelli Superstar, Tommasini X-Fire Gravel
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 406 Post(s)
Liked 389 Times
in
219 Posts
#389
Senior Member
Join Date: Oct 2008
Location: Northern NY...Brownville
Posts: 2,571
Bikes: Specialized Aethos, Specialized Diverge Comp E5
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Liked 454 Times
in
265 Posts
I've built and serviced a few Di2 bikes over the past year and they are pretty sweet. The older 'wired' kit is a bit of a pain in the ass to build as there are far more wires than there are cables in a mech system but not to big a deal.
Setting them up...adjusting the derailleurs...is about the same whether electronic or mech...just a different method of adjusting.
Once set up electronic is sweet...just a light touch of the lever, front or rear, and the shift is made. A nice mechanical system also requires a light touch but no where near what an electronic system is like. The mech front der though still does require more force than just the light touch of the electronic.
I've not had to replace any electronic parts due to failure...just adjustment here and there...and generally once set up you don't have to touch them again even updates are generally not needed unless there is a problem of some sort the update may 'fix'.
I've not noticed many 'during event' failures or problems though one of my friends had a complete failure of his 10 speed Di2 system just before a race. He whined about how it sucked and electronic was awful but it turned out he never charged his battery since buying the bike...used but very nice...he said he forgot all about it but he is forgiven as he is a complete luddite and doesn't even have wifi or cable at his home and just bought his 'first' cell phone last year lol. Since then he has never had another problem.
My bike...'22 Aethos...runs Ultegra mech, even brakes. This is because I had the parts and didn't want to spend the money on Di2. If I had the ready cash I'd switch over to Di2 but not likely as my bike weights 15.3lbs with mech and the money spent will be better used for 'getaways'.
Enjoy and ride what you have...
Setting them up...adjusting the derailleurs...is about the same whether electronic or mech...just a different method of adjusting.
Once set up electronic is sweet...just a light touch of the lever, front or rear, and the shift is made. A nice mechanical system also requires a light touch but no where near what an electronic system is like. The mech front der though still does require more force than just the light touch of the electronic.
I've not had to replace any electronic parts due to failure...just adjustment here and there...and generally once set up you don't have to touch them again even updates are generally not needed unless there is a problem of some sort the update may 'fix'.
I've not noticed many 'during event' failures or problems though one of my friends had a complete failure of his 10 speed Di2 system just before a race. He whined about how it sucked and electronic was awful but it turned out he never charged his battery since buying the bike...used but very nice...he said he forgot all about it but he is forgiven as he is a complete luddite and doesn't even have wifi or cable at his home and just bought his 'first' cell phone last year lol. Since then he has never had another problem.
My bike...'22 Aethos...runs Ultegra mech, even brakes. This is because I had the parts and didn't want to spend the money on Di2. If I had the ready cash I'd switch over to Di2 but not likely as my bike weights 15.3lbs with mech and the money spent will be better used for 'getaways'.
Enjoy and ride what you have...
#390
Fat n slow
Join Date: Oct 2013
Location: Saratoga, NY
Posts: 4,302
Bikes: Cervelo R3, Giant Revolt
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 3259 Post(s)
Liked 2,085 Times
in
979 Posts
Except his comment was specifically about Di2 costing more than his bike and that it is something he’s interested in. I don’t have a problem with people that prefer mechanical, just stop ******g preaching at those of us who like electronic
#391
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
For what it’s worth- you can grab 105Di2 complete groupset at Lordgun for $1258
I use the phone app every time I take my bike off of the trainer to re-index for my wheels. 3 pushes of an arrow and it’s all set. If I forget I can do it while riding and never get off the bike- can’t do that with mechanical.
I use the phone app every time I take my bike off of the trainer to re-index for my wheels. 3 pushes of an arrow and it’s all set. If I forget I can do it while riding and never get off the bike- can’t do that with mechanical.
#392
Senior Member
Join Date: Apr 2007
Posts: 6,763
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
...Do the changes solve well known issues of the old systems? Not quite, I think, at least for non-pro riders.
For some riders under some circumstances, certainly. But I'm not even sure that pro riders had meaningful, competitive problems with rim brakes and manual shifting for the most part (certainly sometimes though).
.. worth the “penalty” in weight and costs? That is a matter of individual preference.
And that value/price/weight value is sometimes actually worth it because of improved function. But I think that often (usually?) people want it just because it's the "latest and greatest" (electronic shifting especially, discs sometimes too). But also often, especially in the case of discs, most riders get them just because it's getting to be all that's available nowadays. Success of the market change (I won't blame it on the nefarious "big bike" but just a change in market driven by Big Bike and the consumer).
All those factors applied to my purchase a couple of years ago. I wanted to try the latest/greatest (electronic) and I'd never tried hydraulic discs even though I'd never felt a need for them, so I wanted to try them. Finally the bike I wanted only came with discs.
They're both great, but didn't at all address any deficiency that I've ever experienced personally. I think this applies to the great majority of riders.
Last edited by Camilo; 03-17-23 at 07:16 PM.
#393
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
While I would agree (especially for shifting), there doesn't need to be a deficiency to benefit from an improvement. Most technical things improve incrementally over time and bicycles are no exception. Electronic shifting is just a refinement of the derailleur drivetrain. Hydraulic disc brakes are a little more than that, but that's off-topic and been flogged to death many times!
#394
Administrator
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 33,005
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11971 Post(s)
Liked 6,652 Times
in
3,485 Posts
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#395
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,116
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1789 Post(s)
Liked 1,629 Times
in
933 Posts
I found this.
I thought it was cool.
Electronic shifting for the C&V
I thought it was cool.
Electronic shifting for the C&V
__________________
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
I shouldn't have to "make myself more visible;" Drivers should just stop running people over.
Car dependency is a tax.
Likes For base2:
#396
Senior Member
Join Date: Jul 2009
Posts: 5,949
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3952 Post(s)
Liked 7,299 Times
in
2,947 Posts
#397
Senior Member
Join Date: Sep 2017
Posts: 7,887
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6971 Post(s)
Liked 10,968 Times
in
4,692 Posts
Likes For Koyote:
#398
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 1,055
Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 414 Post(s)
Liked 920 Times
in
447 Posts
Di3 will tell you, loudly, to clean your derailleur.
Di3.1 will let you turn that off.
Di3.1 will let you turn that off.
Likes For Fredo76:
#399
Steel is real
Join Date: Mar 2013
Location: Not far from Paris
Posts: 1,957
Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam(to be built),1995Coppi(to be built),1993Grandis(to be built)
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 670 Post(s)
Liked 976 Times
in
647 Posts
I don't think that a campy chorus will be longer lasting that shimano 105, this is a just personal opinion.