My New Paisley!
03-23-23, 08:55 AM
#1
Junior Member
Thread Starter
My New Paisley!
Here are some shots of my new to me Paisley tandem. This was given to my by forum member Madhonk. Thank you again, it is awesome!
This is a custom filet brazed frame that is in almost flawless condition, I'm guessing from the late 80's?
Here's the specs-
Phil hubs with threading for brakes on both.
Shimano cantilevers and Phil Wood disc. I do know the disc is asbestos and is likely to explode spontaneously, killing half of my city- it sure looks cool though.
The front currently has the Phil disc.Right lever controls both front canti and disc, left controls rear canti. I do have an Arai that may replace the disc.
Super Champion non-anodized 40 hole rims.
XT front and rear ders controlled by bar ends-index or friction. 6speed Shimano 600 freewheel. These are earlier all metal deraillers that are very nice.
Sugino AT cranks with 54-46-28 rings. This is a bit high for me but I'll give it a go
SR Laprade posts, fluted and painted to match of course.
Brooks wide saddles, front B-67, rear B-72
Nitto moustache bars on front, unknown tourist bars on rear. Stoker stem is a standard 1 1/8" threadless.
Dura Ace headset.
Planet Bike fenders.
Custom painted Zefal frame pump.
I sewed up some custom bags.
This bike was all complete and just needed a dusting off. I have reworked both cockpits and still need to make some minor changes. My wife and daughter have been out with me briefly but it is still quite cold here with snow on the ground. My hopes are to get them interested in riding.
This is a custom filet brazed frame that is in almost flawless condition, I'm guessing from the late 80's?
Here's the specs-
Phil hubs with threading for brakes on both.
Shimano cantilevers and Phil Wood disc. I do know the disc is asbestos and is likely to explode spontaneously, killing half of my city- it sure looks cool though.
The front currently has the Phil disc.Right lever controls both front canti and disc, left controls rear canti. I do have an Arai that may replace the disc.
Super Champion non-anodized 40 hole rims.
XT front and rear ders controlled by bar ends-index or friction. 6speed Shimano 600 freewheel. These are earlier all metal deraillers that are very nice.
Sugino AT cranks with 54-46-28 rings. This is a bit high for me but I'll give it a go
SR Laprade posts, fluted and painted to match of course.
Brooks wide saddles, front B-67, rear B-72
Nitto moustache bars on front, unknown tourist bars on rear. Stoker stem is a standard 1 1/8" threadless.
Dura Ace headset.
Planet Bike fenders.
Custom painted Zefal frame pump.
I sewed up some custom bags.
This bike was all complete and just needed a dusting off. I have reworked both cockpits and still need to make some minor changes. My wife and daughter have been out with me briefly but it is still quite cold here with snow on the ground. My hopes are to get them interested in riding.
Last edited by robobike316; 03-23-23 at 08:59 AM.
Likes For robobike316:
03-23-23, 01:59 PM
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,382 Times
in
3,669 Posts
03-23-23, 03:14 PM
#3
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,528
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1507 Post(s)
Liked 3,478 Times
in
1,132 Posts
Nice job on the Paisley...
and beautiful bags!!
Brent
and beautiful bags!!
Brent
__________________
"I have a tendency to meander sometimes." B.G.
"I have a tendency to meander sometimes." B.G.
Likes For obrentharris:
03-23-23, 03:30 PM
#4
Junior Member
Thread Starter
Got my daughter on it, she is a bit scared, but doing OK.
Likes For robobike316:
03-23-23, 04:06 PM
#5
Junior Member
Likes For TobyGadd:
05-12-23, 07:42 PM
#6
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,949
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,911 Times
in
1,141 Posts
Rob,
I am so gratified to see your daughter on the bike and smiling. How are you doing with the bike? And send us more photos of you guys riding it. Smiles, Mh
I am so gratified to see your daughter on the bike and smiling. How are you doing with the bike? And send us more photos of you guys riding it. Smiles, Mh
05-12-23, 08:26 PM
#7
Junior Member
Thread Starter
Thanks, yes my wife and both kids have been on the back regularly. Just short rides with the kids but my wife and I went out for 1 1/2 hours last week. She has never done any real riding so that was a big ride for her. I'll get some pics up soon. The bike has undergone a couple different bar changes on both cockpits and now has fenders as well. It's a really nice machine and I often go out by myself on it. I would say it has been successful in getting the family out, but I'm just taking it very slow with them.
06-20-23, 07:25 AM
#8
Junior Member
Thread Starter
My son is enjoying some very short rides around the neighborhood
with his feet up on the bottle cage.
with his feet up on the bottle cage.
