Some guys have all the luck….
#1
Senior Member
Thread Starter
Some guys have all the luck….
….And yesterday that guy was me. I made a 3 hour round trip yesterday to pick up this for a very reasonable $150, down $30 from the sellers’ asking price:
A 1995 Trek Multitrack 7900, the very top of the line MT that year. The Trek Multitrack line was never really on my radar until I read through the “Show us your Multitrack” thread a few years ago. From that I decided I wanted a 750, but they’re like hens’ teeth around here. Last year I finally nabbed a 1996 720, and have been really pleased with it. And then this showed up. I didn’t hesitate, and now it sits in my garage as pretty as ever.
Comparing it to the 95 Trek catalogue, It looks like the only thing the PO changed was the stem to a short reach, high rise unit. It, too, is a Trek branded stem so I suspect it got changed when the bike was initially purchased. Additionally, the toe clips and straps have been removed at some point in its life. Tires are different as well, as is to be expected.
I found only two blemishes - one on the drive side seatstay, and one on the no drive side fork blade:
Plans for the future are to replace the stem and seat, and change the shifters (Grip Shift X-ray 8 speed) for some rapid fire 8 speed, and ride the wheels off of it.
It is in like new condition; I doubt if it has 100 miles on it. I’m over the moon excited to add this beauty to my stable; but now I need to find a new home for one of my “lesser” bikes!
Pics for fun:
Tight cable routing!
Thanks for looking!
A 1995 Trek Multitrack 7900, the very top of the line MT that year. The Trek Multitrack line was never really on my radar until I read through the “Show us your Multitrack” thread a few years ago. From that I decided I wanted a 750, but they’re like hens’ teeth around here. Last year I finally nabbed a 1996 720, and have been really pleased with it. And then this showed up. I didn’t hesitate, and now it sits in my garage as pretty as ever.
Comparing it to the 95 Trek catalogue, It looks like the only thing the PO changed was the stem to a short reach, high rise unit. It, too, is a Trek branded stem so I suspect it got changed when the bike was initially purchased. Additionally, the toe clips and straps have been removed at some point in its life. Tires are different as well, as is to be expected.
I found only two blemishes - one on the drive side seatstay, and one on the no drive side fork blade:
Plans for the future are to replace the stem and seat, and change the shifters (Grip Shift X-ray 8 speed) for some rapid fire 8 speed, and ride the wheels off of it.
It is in like new condition; I doubt if it has 100 miles on it. I’m over the moon excited to add this beauty to my stable; but now I need to find a new home for one of my “lesser” bikes!
Pics for fun:
Tight cable routing!
Thanks for looking!
Likes For Smokinapankake:
#2
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,143
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 766 Times
in
572 Posts
That's a beautiful find, and in a really nice color! And you definitely got it for a great price! Color me jelly...grape jelly for want of your new purple passion!
#5
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,143
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 766 Times
in
572 Posts
Yes, the head and seat tube angles are pretty standard fare for hybrids.
So how does it ride, and can you tell a big weight difference between it and your 720? The 1995 Retail Tech Manual calls it out as 24.5 pounds I think, where the 750 is 25.5 pounds or close to it. A similar 720 is probably closer to 28 or 29 pounds.
So how does it ride, and can you tell a big weight difference between it and your 720? The 1995 Retail Tech Manual calls it out as 24.5 pounds I think, where the 750 is 25.5 pounds or close to it. A similar 720 is probably closer to 28 or 29 pounds.
#6
Senior Member
Thread Starter
I can't really say yet how it rides as I haven't put any miles on it yet. Been too busy canning peaches and digging through my pars boxes looking for a stem and some shifters.... But I will use this thread to document my travels and troubles with this bike.
#7
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,593
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5234 Post(s)
Liked 3,608 Times
in
2,357 Posts
wow intimidatingly clean!
#8
Senior Member
Thread Starter
So a few changes as promised:
New seat, new bars, shifters, brake levers, and grips. I used a quill adapter to put on a thread less stem, and the seat is a placeholder for now. Shifters are some Shimano rapidfire 8 speeds I had hanging around, and brake levers were originally Shimano STX shifter/brake lever units but the shifters got destroyed so the levers got “liberated” for continued use. New Specialized Borough tires, 700 x 45c have plenty of clearance.
How does it ride? Around the neighborhood just checking shifting / braking, it feels really fast. Immediate response to pedal input. And it sounds different than a steel or aluminum bike. I don’t have much miles on it but it feels like it will make it hard to go back to my other bikes.
I have some nice, almost new Tiagra 3x10 trigger shifters in my parts box just waiting for a good candidate. But maybe I’ll ride it as is before contemplating that …,
Thanks for coming along!
New seat, new bars, shifters, brake levers, and grips. I used a quill adapter to put on a thread less stem, and the seat is a placeholder for now. Shifters are some Shimano rapidfire 8 speeds I had hanging around, and brake levers were originally Shimano STX shifter/brake lever units but the shifters got destroyed so the levers got “liberated” for continued use. New Specialized Borough tires, 700 x 45c have plenty of clearance.
How does it ride? Around the neighborhood just checking shifting / braking, it feels really fast. Immediate response to pedal input. And it sounds different than a steel or aluminum bike. I don’t have much miles on it but it feels like it will make it hard to go back to my other bikes.
I have some nice, almost new Tiagra 3x10 trigger shifters in my parts box just waiting for a good candidate. But maybe I’ll ride it as is before contemplating that …,
Thanks for coming along!
#10
Senior Member
Thread Starter
So it’s first commute (37 miles round trip) on Thursday went relatively well; I decided however that my positioning was not quite there. So digging through my parts stash I refined the cockpit a bit with a longer, taller stem. Fits pretty good now but time will tell…
Also the brake pads, although appearing new, were terrible:
But this is no surprise as everyone knows that Shimano’s pad compound sucked, even when new. All they ever did for me was embed bits of aluminum and then preceded to gall the living daylights out of the rim. So I replaced them with my favorite pads :
I know everyone raves about Kool-Stop salmon pads but I really like these. They are available as either a threaded mount and a post mount, and I outfit all my bikes with them.
My local bike crack dealer (collective) is urging me to convert it to a 10 speed rear end using the aforementioned shifters I have; so much so that he gave me a screaming deal on the rest of the bits I need to do it: chain, cassette, F&R derailleurs. I’m not quite ready to do that yet as the 8 speed stuff currently on it works so well. I don’t really see what I gain by going to 10, but because he gave me such a good deal I bought it anyway, “just in case, ya know”…
Thanks for coming along!
Also the brake pads, although appearing new, were terrible:
But this is no surprise as everyone knows that Shimano’s pad compound sucked, even when new. All they ever did for me was embed bits of aluminum and then preceded to gall the living daylights out of the rim. So I replaced them with my favorite pads :
I know everyone raves about Kool-Stop salmon pads but I really like these. They are available as either a threaded mount and a post mount, and I outfit all my bikes with them.
My local bike crack dealer (collective) is urging me to convert it to a 10 speed rear end using the aforementioned shifters I have; so much so that he gave me a screaming deal on the rest of the bits I need to do it: chain, cassette, F&R derailleurs. I’m not quite ready to do that yet as the 8 speed stuff currently on it works so well. I don’t really see what I gain by going to 10, but because he gave me such a good deal I bought it anyway, “just in case, ya know”…
Thanks for coming along!
#11
Senior Member
Join Date: Feb 2007
Location: Schwenksville, Pa
Posts: 2,777
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 277 Post(s)
Liked 344 Times
in
183 Posts
I found my 790 with those original pads, I won't even attempt to call them brake pads. The Shimano's were hard as rocks, the Kool Stops work much better.
I can't believe how clean your 7900 is, it looks like it just came out of the box.
I can't believe how clean your 7900 is, it looks like it just came out of the box.
__________________
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
80 Mercian Olympic, 92 DB Overdrive, '07 Rivendell AHH, '16 Clockwork All-Rounder
#12
Senior Member
Thread Starter
Thank you! I really think it spent its life hanging in the garage.
So I made a few more changes, and now I think it’s in it’s pretty much final iteration:
New stem
New bars
New shifters
The bars are my go to, Kalloy UNO AL-030, while the shifters are the 1st gen 8 speed XT, 1995. Same year as the frame. The following year I believe they went 9 speed and V brakes.
And just to try them out, some Specialized Nimbus Sport, 700x45c. These seem much bigger than the other tires, Specialized Borough in 700x45c.
And now to make up for lost riding time! Thanks for looking!
So I made a few more changes, and now I think it’s in it’s pretty much final iteration:
New stem
New bars
New shifters
The bars are my go to, Kalloy UNO AL-030, while the shifters are the 1st gen 8 speed XT, 1995. Same year as the frame. The following year I believe they went 9 speed and V brakes.
And just to try them out, some Specialized Nimbus Sport, 700x45c. These seem much bigger than the other tires, Specialized Borough in 700x45c.
And now to make up for lost riding time! Thanks for looking!
#14
Senior Member
Thread Starter
Out for a ride on this beautiful afternoon and I had to stop for a pic or two:
And a few more:
I am loving this bike!
And a few more:
I am loving this bike!
#15
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,927
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 781 Post(s)
Liked 1,810 Times
in
1,039 Posts
fantastic color scheme....I would love to find something like that.
#17
Senior Member
Thread Starter
#21
Newbie
Join Date: Apr 2023
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
It's funny to read all the posts, without being able to view the pictures...
Hopefully I will be able to look at them, as today I also became an owner of Trek 7900 and I would love to take a look and compare our bikes
Hopefully I will be able to look at them, as today I also became an owner of Trek 7900 and I would love to take a look and compare our bikes