Your pedal wrench of choice?
#1
Banned.
Thread Starter
Your pedal wrench of choice?
I might have to bite the bullet and spend half a Benji on a good high quality pedal wrench. I've encountered too many difficult pedals to unwind and can't keep wasting time going to a bike co-op or bothering the LBS (even though I remunerate their efforts with salt-vinegar chips and ginger ale!). I bought the bike I ride for less than the price of the wrench but sometimes that is just the way it is.
I was considering the Park PW4. Chain Reaction has some offbrand ones but it's the same with any tool you buy; cry once. Experiences shared with a high quality wrench are welcome.
I was considering the Park PW4. Chain Reaction has some offbrand ones but it's the same with any tool you buy; cry once. Experiences shared with a high quality wrench are welcome.
#3
Senior Member
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319
Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times
in
723 Posts
I have an Allen 20574 3/8" drive crowfoot wrench which is narrow enough to fit any pedal flats I have come across, and I can put whatever breaker bar is needed on it. I use stainless pedal washers and Tef-Gel on the threads so my pedals come right off. There are currently 10 available on EBay for $6.00 each shipped. https://www.ebay.com/itm/Allen-20574...EAAOSw64xcSdIo Cheaper than I paid.
Likes For dsbrantjr:
#4
Droid on a mission
Join Date: May 2018
Location: Palm Coast, FL
Posts: 1,005
Bikes: Diamondback Wildwood Classic
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Liked 280 Times
in
195 Posts
We have many types and versions in the shop that have been donated but I do like the ParkTool PW-4 the best.
You may want to do a search on ebay, good bargains there on used ones will help your budget concerns.(as low as $26.99 shipped)
https://www.ebay.com/sch/i.html?_fro...Condition=3000
2nd is the Bikehand version, here is one for $15 shipped, similar to the Park Tool PW-4
https://www.ebay.com/itm/BIKEHAND-Bi...wAAOSw~vpaHsqb
You may want to do a search on ebay, good bargains there on used ones will help your budget concerns.(as low as $26.99 shipped)
https://www.ebay.com/sch/i.html?_fro...Condition=3000
2nd is the Bikehand version, here is one for $15 shipped, similar to the Park Tool PW-4
https://www.ebay.com/itm/BIKEHAND-Bi...wAAOSw~vpaHsqb
__________________
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
Last edited by JoeTBM; 01-17-20 at 02:51 AM.
#5
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
I have the now discontinued Pedro's "Pro" pedal wrench which is very strong, heavy and durable. I bought it at a going-out-of-business sale for about half of the $30 retail price so it was worth buying at that price.
Be aware that some pedals, notably Shimano's, don't have 15 mm wrench flats but have a 6 mm (bad) or 8 mm (much better) hex key recess in the spindle. You want a really long Allen L-type key for these.
Be aware that some pedals, notably Shimano's, don't have 15 mm wrench flats but have a 6 mm (bad) or 8 mm (much better) hex key recess in the spindle. You want a really long Allen L-type key for these.
#9
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26425 Post(s)
Liked 10,381 Times
in
7,209 Posts
...Hozan makes a high quality pedal wrench, but i usually end up using this one.
#10
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,951
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,912 Times
in
1,142 Posts
I have used these for the last 40 years. Maybe even the ones we used in the pedal installation scene in Breaking Away, but worrying about how long they will last; I had these in the second picture made a couple of weeks ago. A little bit longer and maybe a bit more leverage. Smiles, MH
Likes For Mad Honk:
#11
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,676
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 839 Post(s)
Liked 1,064 Times
in
747 Posts
Park PW4 or the Lezyne above for me. The angled wrench flats make any pedal easy to get at the best leverage position for the wrench.
#12
Full Member
You want a long wrench to keep your knuckles away from the chain ring teeth.
The pw3 is pretty much guaranteed to put you in an emergency room for stitches.
The PW4 is great. Long enough and has 4 angle options to get the right leverage. It's built strong to last for decades in shop use.
The pw3 is pretty much guaranteed to put you in an emergency room for stitches.
The PW4 is great. Long enough and has 4 angle options to get the right leverage. It's built strong to last for decades in shop use.
#13
Senior Member
A pedal wrench is one of those things you just don't need to research that hard, in my opinion. You either have one or you don't. The Park PW-3 has worked very well for me over the years so I never really thought about any other model. Buy it, use it, and ride.
Likes For Papa Tom:
#14
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,800
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,026 Times
in
723 Posts
I've had the PW4 for years and have never regretted buying it, the angled openings means you can really pick your leverage position and I've never found the pedal it couldn't remove with no real effort. Also makes a nice club which is why the end of the handle on mine is a little dented up, the plastic doesn't mar what you're hitting if needed. I've also used the bikehand version and you won't find it lacking for general use. One shop I was at one of the techs bought it for himself and used it for years with no trouble, just has slightly less leverage but still has the same angled benefits.
#15
Senior Member
Park is nice but I bought a local mob's wrench instead with similar angled wrench head at one end, plus 14/15mm sockets at the other. Most handy I don't need to bust out the socket set to remove crank arm nut.
This one https://www.reidcycles.com.au/pedal-...15mm-sock.html but I doubt it's made custom for Reid, probably just a generic tool with their brand applied.
This one https://www.reidcycles.com.au/pedal-...15mm-sock.html but I doubt it's made custom for Reid, probably just a generic tool with their brand applied.
#16
PBP Ancien (2007)
Join Date: Jan 2020
Location: South Wales, UK
Posts: 358
Bikes: Cannondale CAADX (for commuting), Cannondale CAAD12, Cannondale CAAD12 Team CNCPT, Giant Contend 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 156 Times
in
106 Posts
I'm not sure of the model number but it's a Park Tool one for me although most of my bikes have Shimano PDA600 pedals on them which use an 8mm hex key.
In the UK most mail order bikes include a cheap and heavy multi-tool and a stubby little pedal wrench so I've got a few of those lurking about too. The ones supplied by Evans are actually quite neat.
In the UK most mail order bikes include a cheap and heavy multi-tool and a stubby little pedal wrench so I've got a few of those lurking about too. The ones supplied by Evans are actually quite neat.
#17
Senior Member
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631
Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times
in
166 Posts
Park PW4 works great every time, with excellent leverage and clearance. The angled head allows for a good position on the pedal in all circumstances.
#18
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,837
Bikes: 2012 Specialized Elite Disc, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 741 Times
in
430 Posts
Another vote for PW-4. I personally don't do enough at home to justify buying one for myself though.
#19
Senior Member
Two things first--grease threads,
-- rubber mallet or the like
I have a short cheap wrench that I've used for 30 years maybe
I don't think it's worth spending more money on a real nice pedal wrench, put the cash towards a good cable cutter or a stand.
I remove pedals on our family bikes sometimes, and my old wrench and a bang with the mallet works fine.
now a good cable and housing cutter like my parks one,THAT waa worth spending money on.
same with having a bike stand
-- rubber mallet or the like
I have a short cheap wrench that I've used for 30 years maybe
I don't think it's worth spending more money on a real nice pedal wrench, put the cash towards a good cable cutter or a stand.
I remove pedals on our family bikes sometimes, and my old wrench and a bang with the mallet works fine.
now a good cable and housing cutter like my parks one,THAT waa worth spending money on.
same with having a bike stand
#20
Senior Member
First choice is a hex socket and an impact [1]. Works wonders and it's a game changer. If no hex end I have a random brand long wrench I shaved the head a little thinner on the grinder to fit. The impact is also good on cassettes with the cassette socket tool and no whip needed and also on some style cranks.
[1] A drill/driver bit style impact can work but a full size impact comes in handy too.
[1] A drill/driver bit style impact can work but a full size impact comes in handy too.
Last edited by u235; 01-14-20 at 08:11 AM.
#21
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
An interesting "pedal wrench" was the now long out of production Park RW-1. It was a flat take-along tool about 6" tong with a 15mm pedal wrench on one end and a 32mm headset wrench on the other. It had holes to mount under a bottle cage if you wished. I bought it when I had a S&S coupled travel bike that required pedal removal for packing. I've never seen the need for super tight pedal installation and it worked fine for this use. The 32mm 1" headset lock nut end was never used but I can see that touring bicyclists might have found it useful BITD.
#22
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,957
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 880 Times
in
527 Posts
When I volunteer at the local co-op, I'll reach for the Park PW-4 before any of the others. I like the way the head offers a couple of angles for mounting the spindle flats. At home, I use a Park HCW-6, which has a 15 mm side for pedals - Or, I just use a regular 15mm open end wrench. depending on which is closest at hand.
I have to say that I very seldom encounter a pedal that requires a lot of force to break free. Technique is important: mount the wrench on the spindle flats so that it forms an acute angle to the crank. This give you a lot of mechanical advantage.
I have to say that I very seldom encounter a pedal that requires a lot of force to break free. Technique is important: mount the wrench on the spindle flats so that it forms an acute angle to the crank. This give you a lot of mechanical advantage.
Likes For Moe Zhoost:
#23
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,552
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,585 Times
in
2,344 Posts
+1 for a long one. in 2016 I bought a vintage Zeus pedal wrench (from 1970's - Made in Spain) off CL from a woman who used to own a bike shop. don't remember the price but it was cheap, $20 maybe? it's long & skinny. it has 2 diff. sized notches 15mm at one end & 14mm (aka 9/16) at the other end. seems to work on anything I come across. it might be nice if the handle was wider/thicker, where one's hand applies pressure. but not really necessary, cuz whenever I swap pedals, I clean & lube threads as necessary. so I think my hard battles are over
Last edited by rumrunn6; 01-14-20 at 10:02 AM.
#24
Senior Member
When I install my pedals I use grease and a pedal washer. I just get them snug so that if they tighten up (progression) I can still get them off.
A friend brought one over that I couldn't budge and the local shop couldn't get it off. I found a u-tube video that shows wrapping a stuck pedal in a plastic bag full of ice and letting it sit for 10 minutes. The thing came right off!
A friend brought one over that I couldn't budge and the local shop couldn't get it off. I found a u-tube video that shows wrapping a stuck pedal in a plastic bag full of ice and letting it sit for 10 minutes. The thing came right off!
#25
Generally bewildered
Join Date: Aug 2015
Location: Eastern PA, USA
Posts: 3,037
Bikes: 2014 Trek Domane 6.9, 1999 LeMond Zurich, 1978 Schwinn Superior
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1152 Post(s)
Liked 341 Times
in
251 Posts
BTW, I used the same wrenches that ol' Honk shows in his picture. Good memories - those things worked great. Now I use a vintage Armstrong Armaloy 15mm or 9/16" wrench.