Calling Bianchi experts--Please help ID frame
#1
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 52
Bikes: ‘09 Ibis Silk SL, ‘08 Cannondale Synapse, ‘97 Cannondale R300, '96 CKC, '91 Batt., '86 Simoncini Cromor, '85 Allez, '78 PX10, '76 Gran Jubile, '73 Arctic, '73 Interclub, '72 TdF, '71 PX10, '70 Mondia SS, ‘90 Basso Paris Roubai
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 6 Times
in
3 Posts
Calling Bianchi experts--Please help ID frame
I'm not very knowledgeable about Bianchis, lovely as they are. Can anyone help me determine year and model for this particular bike Detail photos below). Most certainly Japanese. Shimano dropouts, 130 spaced, long point lugs, lots of chrome, cable guides on top of BB, one set of bottle bosses. No decals or tubing sticker. Full Ultegra 6500. Serial No. CS 26904. Thanks for any insight.
Likes For VtwinVince:
#3
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
paging Bianchigirll
It's odd that the logo on staycaps is the "older font" as well as the amount of chrome on this frame if it was actually Asian-made from the (let's say) early '80s (and sure seems to have been re-painted and the rear triangle spread for 130)
Another clue (besides that serial number) would be the seat post size, plus the BB threading
It's odd that the logo on staycaps is the "older font" as well as the amount of chrome on this frame if it was actually Asian-made from the (let's say) early '80s (and sure seems to have been re-painted and the rear triangle spread for 130)
Another clue (besides that serial number) would be the seat post size, plus the BB threading
Likes For unworthy1:
#4
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,658
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1027 Post(s)
Liked 2,531 Times
in
1,059 Posts
In any event, it looks like a nice bike that I would expect to ride well.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
#5
Senior Member
Join Date: Jul 2022
Location: Pac NW
Posts: 1,938
Bikes: several Eddy Merz (ride like Eddy, braze like Jim!)
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 1084 Post(s)
Liked 1,820 Times
in
662 Posts
I am anxiously awaiting the results of this query.
The local co-op has one of these as well. The Celeste doesn’t seem very vintage, but it could’ve been repainted and property. Decals installed.
It has the “B” on the forks, and the Panto on the seat stays plus 3 cable guides.
The spread is 126.
The local co-op has one of these as well. The Celeste doesn’t seem very vintage, but it could’ve been repainted and property. Decals installed.
It has the “B” on the forks, and the Panto on the seat stays plus 3 cable guides.
The spread is 126.
__________________
"Leave the gun. Take the Colnagos."
"Leave the gun. Take the Colnagos."
#7
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,799
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,329 Times
in
837 Posts
Interesting. Mine is a made-in-Italy 1982, with under-bb routing and no front derailleur hanger. Front derailleur hangers seem to have fallen in and out of favor over the years -- I am thinking back to 1950s bikes with Simplex "clanger"/"suicide"/"stick-shift" front derailleurs.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#8
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
the more I look the weirder this gets: clearly there's been some aftermarket work done cause I don't think the FD hanger and over-BB cable guides align with a JP-made Bianchi from the early-mid '80s era (or earlier!) we are guessing.
Also I confess I still don't understand Asian serial numbers but per T-Mar's guide that 2-letter 5-numeral SN doesn't correspond...yet it has Shimano DOs, so has to be Asian-made, right?
Are fork ends also Shimano?
Also appears the rear bridge is for a nutted caliper, is the fork drilled same (or been modded)?
Still would like to know the seat post size and BB threading just to cross off some dead-end clues
And just to add more to this dead horse beat-down, I went to find some catalog scans and as a data point here's the last 2 pages for USA catalog 1983 that show the 4 bare framesets Bianchi offered (also same 4 in '84) that show
-one Italian frameset with Columbus tubing and I guess Campy ends with a touch of chrome
-3 Japanese-made with Ishiwata tubing and forks and zero chrome, no specs that call out if these have Shimano or SunTour ends but I bet Shimano since Bianchi had complete bikes that use those in '87
ALL (JP sets) have over BB shell cable routing, NONE seem to have a FD tab, cannot tell about brake drilling or WB bosses (except the Italian Specialissima seems to have one pair)
Check it out:
Also I confess I still don't understand Asian serial numbers but per T-Mar's guide that 2-letter 5-numeral SN doesn't correspond...yet it has Shimano DOs, so has to be Asian-made, right?
Are fork ends also Shimano?
Also appears the rear bridge is for a nutted caliper, is the fork drilled same (or been modded)?
Still would like to know the seat post size and BB threading just to cross off some dead-end clues
And just to add more to this dead horse beat-down, I went to find some catalog scans and as a data point here's the last 2 pages for USA catalog 1983 that show the 4 bare framesets Bianchi offered (also same 4 in '84) that show
-one Italian frameset with Columbus tubing and I guess Campy ends with a touch of chrome
-3 Japanese-made with Ishiwata tubing and forks and zero chrome, no specs that call out if these have Shimano or SunTour ends but I bet Shimano since Bianchi had complete bikes that use those in '87
ALL (JP sets) have over BB shell cable routing, NONE seem to have a FD tab, cannot tell about brake drilling or WB bosses (except the Italian Specialissima seems to have one pair)
Check it out:
Last edited by unworthy1; 03-15-24 at 01:11 PM.
#9
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 52
Bikes: ‘09 Ibis Silk SL, ‘08 Cannondale Synapse, ‘97 Cannondale R300, '96 CKC, '91 Batt., '86 Simoncini Cromor, '85 Allez, '78 PX10, '76 Gran Jubile, '73 Arctic, '73 Interclub, '72 TdF, '71 PX10, '70 Mondia SS, ‘90 Basso Paris Roubai
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 6 Times
in
3 Posts
Seatpost size is 27.2. I’ll have to check the BB threading and fork ends. Fork brake mount is recessed. I am guessing this is a modification. We’ve really been scratching our heads on this one. Also assuming it has been rechromed. Have never seen a Bianchi with a fully chromed head tube. Thanks all for your help so far.
#10
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,064 Times
in
788 Posts
"Seatpost size is 27.2"
It just got weirder (for me anyway) since I'd expect either Tange or ishiwata seat tubes to have either 27.0 or 26.8.
I suppose it could have been reamed for 27.2 since it's enjoyed some other mods...
when you get around to more close inspection: shine a light up the base of the fork steerer and see if there's any "rifling".
It just got weirder (for me anyway) since I'd expect either Tange or ishiwata seat tubes to have either 27.0 or 26.8.
I suppose it could have been reamed for 27.2 since it's enjoyed some other mods...
when you get around to more close inspection: shine a light up the base of the fork steerer and see if there's any "rifling".
#11
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,860
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,928 Times
in
1,493 Posts
I'm curious about the chrome. Does it looked highly polished or like someone removed paint from it? Where are you and the bike? Most of my knowledge is from my USA catalogs. A Canadian model might account for the chrome, especially the fork.
Considering the Shipmano dropouts I agree it's likely the early '80s Professional generally with the 022 Ishawata tubing
Considering the Shipmano dropouts I agree it's likely the early '80s Professional generally with the 022 Ishawata tubing
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#12
Newbie
Thread Starter
Join Date: Jul 2007
Posts: 52
Bikes: ‘09 Ibis Silk SL, ‘08 Cannondale Synapse, ‘97 Cannondale R300, '96 CKC, '91 Batt., '86 Simoncini Cromor, '85 Allez, '78 PX10, '76 Gran Jubile, '73 Arctic, '73 Interclub, '72 TdF, '71 PX10, '70 Mondia SS, ‘90 Basso Paris Roubai
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 6 Times
in
3 Posts
The bike and I are in Minneapolis, so it’s certainly possible it could be of Canadian origin. Both chrome and paint are first class and nearly pristine, which is why I think it may have been refinished. Wouldn’t expect that on a 40 year old bike.
Likes For BluePx10: