Changing Tire and Tube Problems
#1
Newbie
Thread Starter
Join Date: Aug 2012
Location: Sunny Florida
Posts: 49
Bikes: '12 Specialized Hardrock, '89 Schwinn Cruiser Supreme
Liked 0 Times
in
0 Posts
Changing Tire and Tube Problems
I know I probably should be posting this in a different forum, but I'm having problems changing my 700x38c tubes and tires on my 29'' rims. The tires are folding tires, but for some reason, both tires and tubes seem too big. The tires bead keeps coming out and the tubes want to bunch up in the tire. I'm just wondering if I'm missing a trick to getting them on. It doesn't seem to have been a problem for me before
#2
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 13,054
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Liked 4,083 Times
in
2,641 Posts
I don't have an answer on the bead but are you putting a little air in the tube first? Doing so makes getting it in cleanly a lot easier. And the really simple trick to getting the right amount of air - don't use a pump or inflator. Blow the tube up with your lungs. (Sadly, this only works with presta valves, not Schrader unless you can figure out how to depress the spring. It's such a useful trick that it is a reason to consider presta it you aren't already using it. You will need a sleeve to reduce the rim valve hole. Any bike shop.)
In any case, just enough air to inflate the tube, no more, will make the job easier with much less chance of pinching the tube as you work the bead over the rim. (Sometimes I have to let a little air out to get that last bit of bead. That's OK. It did its job.)
In any case, just enough air to inflate the tube, no more, will make the job easier with much less chance of pinching the tube as you work the bead over the rim. (Sometimes I have to let a little air out to get that last bit of bead. That's OK. It did its job.)
#3
Senior Member
Join Date: Dec 2005
Location: Cape Vincent, NY
Posts: 1,402
Bikes: Specialized Tarmac Expert, 2002 TREK 520, Schwinn Mesa WINTER BIKE, Huffy Rock Creek 29er, 1970s-era Ross ten speed. All my bikes are highly modified(except the Tarmac) yet functional, and generally look beat to ****. .
Liked 91 Times
in
54 Posts
If any part of the tube gets under the bead of the tire, it'll push the tire bead off the rim when you inflate. You've gotta try and situate the tube inside the tire as evenly as you can with your fingers when you install.
Last edited by Thulsadoom; 02-15-24 at 12:14 PM.
Likes For Thulsadoom:
#4
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,692
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Liked 257 Times
in
207 Posts
I doubt the tire is too big, if you are mounting one side of the tire on and it fits, then the tire is fine, so put some air into the tube by blowing into it as hard as you can with your lips, this will give the tube enough air to give it some form.