Shimano XTR 9-Speed Shifters with Shimano 105 Road triple front derailleur
#1
Newbie
Thread Starter
Shimano XTR 9-Speed Shifters with Shimano 105 Road triple front derailleur
Will Shimano XTR 9-Speed MTB shifters work with my Shimano 105 Road triple front derailleur?
Btw, I'm assuming the shifters are friction mode for the front derailleur-- is this true?
Btw, I'm assuming the shifters are friction mode for the front derailleur-- is this true?
#2
Senior Member
Join Date: Dec 2008
Location: Pioneer Valley
Posts: 1,039
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 342 Post(s)
Liked 766 Times
in
399 Posts
These will be indexed front and rear. The front may not work well, mixing mtb shifter and road derailleur. If the derailleur is appropriate for your chainring setup, you may want to source a flat bar road front shifter such as the R3500. Or if you do want friction front shifting, use a grip or thumb shifter. Rear should be fine as-is.
#3
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,599
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4389 Post(s)
Liked 4,028 Times
in
2,689 Posts
For 9 speed and below generally everything was compatible (minus a few oddballs like some of the 74xx DA stuff) so you should be fine. It is all indexed. To get friction you would need thumb, downtube or barcon shifters but it should work decently well enough.
#4
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,375
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6225 Post(s)
Liked 4,228 Times
in
2,372 Posts
These will be indexed front and rear. The front may not work well, mixing mtb shifter and road derailleur. If the derailleur is appropriate for your chainring setup, you may want to source a flat bar road front shifter such as the R3500. Or if you do want friction front shifting, use a grip or thumb shifter. Rear should be fine as-is.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#5
aged to perfection
Join Date: Jun 2009
Location: PacNW
Posts: 1,823
Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 840 Post(s)
Liked 1,271 Times
in
669 Posts
agreed mostly with the above. Questions like "will X work with Y" where X and Y come from different manufacturers, and maybe even generations of components, are very difficult to answer with the degree of certainty that the OP expects.
not to mention the definition of "work". Will it jockey the chain back and forth ? Maybe. Will it shift with precision and flawless reliability ? Hard to say.
Given what a used MTB front derailleur costs, that would be the route I'd suggest, but it's hard to advise the OP further because we don't know if he's runninng double or triple chainrings, etc.
/markp
not to mention the definition of "work". Will it jockey the chain back and forth ? Maybe. Will it shift with precision and flawless reliability ? Hard to say.
Given what a used MTB front derailleur costs, that would be the route I'd suggest, but it's hard to advise the OP further because we don't know if he's runninng double or triple chainrings, etc.
/markp