Think Continental will ever "loosen" the fit?
#26
Senior Member
Join Date: Sep 2017
Location: Upstate SC
Posts: 1,705
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 1,656 Times
in
783 Posts
My personal experience - upgraded my wheelset to a nice pair of Boyd carbons. The wheels were tubeless ready, and the proper tape and valve stems were included with the purchase.
I bought a pair of Continental GP5000 tubeless. They were impossible to mount. I'm not talking difficult, I'm talking IMPOSSIBLE, as in almost 3 hours myself, and then an hour at the LBS with myself and the tech trying.
I finally threw in the towel, and bought tubes and a pair of GP5000 clinchers. They went on with my thumbs. I sold the tubeless tires to a guy who told me he had no issue getting them mounted on his wheels (forget the brand, but they were alloy.)
Boyd has since come out with a notice to customers to NOT attempt to mount GP5000 tubeless on their carbon rims, as customers have damaged the wheels trying, and Boyd will not cover that damage.
Unless and until the industry comes out with a tubeless rim 'standard', I'll stick with tubes and clinchers.
I bought a pair of Continental GP5000 tubeless. They were impossible to mount. I'm not talking difficult, I'm talking IMPOSSIBLE, as in almost 3 hours myself, and then an hour at the LBS with myself and the tech trying.
I finally threw in the towel, and bought tubes and a pair of GP5000 clinchers. They went on with my thumbs. I sold the tubeless tires to a guy who told me he had no issue getting them mounted on his wheels (forget the brand, but they were alloy.)
Boyd has since come out with a notice to customers to NOT attempt to mount GP5000 tubeless on their carbon rims, as customers have damaged the wheels trying, and Boyd will not cover that damage.
Unless and until the industry comes out with a tubeless rim 'standard', I'll stick with tubes and clinchers.
Likes For Bald Paul:
#27
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,987
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,810 Times
in
3,318 Posts
I put a new 25mm Continental GP 5000 tubed tire on my Mavic Open Sport rim without levers this last Saturday. I realized that I got the rotation wrong, so I removed it with out levers, fingers only. So that reputation you heard is just from those on the webs that can't.
In fact it's been a long while since I've used a lever to remove or install any tire.
In fact it's been a long while since I've used a lever to remove or install any tire.
#28
Newbie
Join Date: Aug 2018
Posts: 63
Bikes: Bianchi Sempre Veloce eTap, Poseidon X, Cannondale F5,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 22 Times
in
11 Posts
My personal experience - upgraded my wheelset to a nice pair of Boyd carbons. The wheels were tubeless ready, and the proper tape and valve stems were included with the purchase.
I bought a pair of Continental GP5000 tubeless. They were impossible to mount. I'm not talking difficult, I'm talking IMPOSSIBLE, as in almost 3 hours myself, and then an hour at the LBS with myself and the tech trying.
I finally threw in the towel, and bought tubes and a pair of GP5000 clinchers. They went on with my thumbs. I sold the tubeless tires to a guy who told me he had no issue getting them mounted on his wheels (forget the brand, but they were alloy.)
Boyd has since come out with a notice to customers to NOT attempt to mount GP5000 tubeless on their carbon rims, as customers have damaged the wheels trying, and Boyd will not cover that damage.
Unless and until the industry comes out with a tubeless rim 'standard', I'll stick with tubes and clinchers.
I bought a pair of Continental GP5000 tubeless. They were impossible to mount. I'm not talking difficult, I'm talking IMPOSSIBLE, as in almost 3 hours myself, and then an hour at the LBS with myself and the tech trying.
I finally threw in the towel, and bought tubes and a pair of GP5000 clinchers. They went on with my thumbs. I sold the tubeless tires to a guy who told me he had no issue getting them mounted on his wheels (forget the brand, but they were alloy.)
Boyd has since come out with a notice to customers to NOT attempt to mount GP5000 tubeless on their carbon rims, as customers have damaged the wheels trying, and Boyd will not cover that damage.
Unless and until the industry comes out with a tubeless rim 'standard', I'll stick with tubes and clinchers.
I did put some GP5000 non tubeless on my wife's bike and they went on reasonably easy.
#29
Senior Member
One note: I've had really good luck with the 5KTLs. They have proven to be very durable, they roll fast and have lots of grip. Years ago, I had such a terrible time with sidewall cuts on three different tubed 4KIIs that I actually swore off Conti for a while. The 5KTLs have brought me back to the brand. Tubeless vs. tubed: probably not a fair comparison but there you go.
Last edited by Hiro11; 08-04-21 at 06:17 AM.
Likes For Hiro11:
#30
Senior Member
Join Date: Jul 2005
Location: Ohio
Posts: 2,857
Bikes: Road bike, Hybrid, Gravel, Drop bar SS, hard tail MTB
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1218 Post(s)
Liked 298 Times
in
214 Posts
Gp5000 clinchers are only tight the first time. After that its supercsimple to pull one bead to swap tubes by hand.
My only argument against gp5000 if you lack the skill, you can damage sidewall.
My only argument against gp5000 if you lack the skill, you can damage sidewall.
#31
On Your Left
Join Date: Nov 2011
Location: Long Island, New York, USA
Posts: 8,373
Bikes: Trek Emonda SLR, Sram eTap, Zipp 303
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 3004 Post(s)
Liked 2,433 Times
in
1,187 Posts
I've been riding GP4K for 28,000 miles on Zipp 303s. Once I break the bead I can remove them with just my hands. Installation is totally tool free.
I just hope the new GP5K are just as easy.
I just hope the new GP5K are just as easy.
#32
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,218
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2582 Post(s)
Liked 5,639 Times
in
2,921 Posts
Don’t know where the bad rap is coming from but have Conti 5000s tubeless and tubers on two bikes with no issues getting them on or off. Had some 23C Vittoria’s many years ago that fought me every time.
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️