are these steel or aluminum?
#1
Senior Member
Thread Starter
are these steel or aluminum?
They're sugino gp's. I just honestly can't tell what they're made out of.
#3
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Crank arms gotta be aluminum. The rings look to be steel.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#4
Senior Member
Thread Starter
#5
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,380
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2487 Post(s)
Liked 2,956 Times
in
1,679 Posts
Steel cranks would be roughly 1/3 to 1/2 the size of those cranks in cross-section.
#6
Senior Member
Thread Starter
100% right on that one.
I had a pair of stainless steel cranks laying around and I compared them. Side by side it's really obvious, but for some reason these threw me off. Thanks for all the help guys!
I had a pair of stainless steel cranks laying around and I compared them. Side by side it's really obvious, but for some reason these threw me off. Thanks for all the help guys!
Likes For cyrano138:
#7
Senior Member
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,442
Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 641 Times
in
407 Posts
That has to be easier than the water-in-a-bathtub test.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.
#8
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,625
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3890 Post(s)
Liked 6,488 Times
in
3,211 Posts
Low end aluminum arms are sometimes chromed, so a magnet will barely attract to it. If you're not familiar with how hard a magnet sticks to real steel, you can get confused by this. Chromed aluminum arms are also really difficult to polish, unlike anodized arms which can be cleaned up easily with lye.
#9
Senior Member
Thread Starter
Low end aluminum arms are sometimes chromed, so a magnet will barely attract to it. If you're not familiar with how hard a magnet sticks to real steel, you can get confused by this. Chromed aluminum arms are also really difficult to polish, unlike anodized arms which can be cleaned up easily with lye.
Likes For cyrano138: