Is this for aestetics or does it have a functional purpose?
#1
Full Member
Thread Starter
Join Date: Mar 2017
Location: Franklin, TN
Posts: 424
Bikes: 2016 Cervelo R3 & 1999 Litespeed Tuscany
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Liked 138 Times
in
79 Posts
Is this for aestetics or does it have a functional purpose?
I have a FD-5801 on one of my bikes and this top tab with the cable running through it won't snap into the top of the derailleur (I'm sure it's something I broke). Does it have any functional purpose other than to tidy up the cable? I don't have bad shifting and the cable doesn't hit the crank so I'm not too worried about it unless there's something I'm missing.
Likes For MudPie:
#3
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,479
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,039 Times
in
1,948 Posts
It helps retain the excess cable lead from rubbing on nearby stuff.
__________________
-Oh Hey!
-Oh Hey!
#4
Senior Member
Join Date: Apr 2011
Posts: 7,259
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4530 Post(s)
Liked 1,672 Times
in
1,096 Posts
Keeps debis out of the unusually vertical fixing bolt.
#5
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,774
Bikes: Trek FX 2, Cannondale Synapse x2, Cannondale CAAD4, Santa Cruz Stigmata 3
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Liked 1,519 Times
in
1,052 Posts
Troul and Kontact covered the functionality of the cover. If you did not break the tab on the bottom of the cover, it just needs to be pushed back onto the FD. My guess is that you probably tried to do so in the wrong orientation; it is not intuitive and took me a few tries (and RTFM) the first time it popped off. Fortunately, I just cleaned my gravel bike, so I can take this photo to show the proper orientation.
#6
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,886
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5884 Post(s)
Liked 2,727 Times
in
1,521 Posts
Unrestrained, the waste end of the gear wire would ting against the crank arm and drive you crazy. So, call it acoustic aesthetics.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
#7
Full Member
Thread Starter
Join Date: Mar 2017
Location: Franklin, TN
Posts: 424
Bikes: 2016 Cervelo R3 & 1999 Litespeed Tuscany
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 161 Post(s)
Liked 138 Times
in
79 Posts
Welp, I played around with it last night and it finally snapped in place. As brought up above, I must have been trying to force it in the wrong way.
Likes For MidTNBrad:
#8
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,479
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 3,039 Times
in
1,948 Posts
Likes For Troul: