CDX update
#1
Senior Member
Thread Starter
CDX update
We have up to today put right at 7,200 miles on the Gates CDX system. I did replace the first belt at around 2,900 miles after we picked up some debris that caused the belt to come untracked. Gates suggested that I replace it as the carbon strands could have been stretched and if so the failure mode is catastrophic. The new belt has right at 4,300 miles on it and still looks great, the sprockets (belt rings) also still look great.
At this time I am happy with the system, it is clean, light and quiet and the belt is lasting as long as the chain. I hope that this second belt continues to perform for several thousand more miles. I have "0" plans of ever going back to a chain for the cross over drive.
At this time I am happy with the system, it is clean, light and quiet and the belt is lasting as long as the chain. I hope that this second belt continues to perform for several thousand more miles. I have "0" plans of ever going back to a chain for the cross over drive.
#2
Senior Member
We have the original version of the Gates timing belt on our Calfee and have just over 5000 trouble free miles.
We have found the belt makes of bit of noise after a rainy ride. This is rectified by spraying with silicon lube.
We have found the belt makes of bit of noise after a rainy ride. This is rectified by spraying with silicon lube.