Cinelli 1a stem handlebar bolt spinning
#51
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,047
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,388 Times
in
3,673 Posts
Well, I gave up with this stem, but not in the way you think.
The best thing to do was to remove the bolt, inspect for damage and try to put the bolt back in a way that would hold better the next time around. Using different Allen wrenches, I slowly got the nut to hold to make a tiny bit of progress. Went from a 2mm Allen to a 4.5mm Allen with this grip:
At this point, I wasn't able to pull hard enough to get the nut to "stick" anymore. But what I was able to do was mount some handlebars in it. Initially, these were just supposed to be a passive wedge, as my Allen wrenches marred the stem something awful. But with diminishing returns as they were, I gave up and started cranking down the other way on the bolt.
After a little struggle, I got the nut to stop spinning and cranked down hard. The nut is now embedded much deeper in the stem than before, a good sign that I might have some luck removing it someday.
But that's not my plan. I can hopefully go the rest of my life without ever loosening this bolt now. If the bars go, the stems go, and what I have put together let no man separate.
The best thing to do was to remove the bolt, inspect for damage and try to put the bolt back in a way that would hold better the next time around. Using different Allen wrenches, I slowly got the nut to hold to make a tiny bit of progress. Went from a 2mm Allen to a 4.5mm Allen with this grip:
At this point, I wasn't able to pull hard enough to get the nut to "stick" anymore. But what I was able to do was mount some handlebars in it. Initially, these were just supposed to be a passive wedge, as my Allen wrenches marred the stem something awful. But with diminishing returns as they were, I gave up and started cranking down the other way on the bolt.
After a little struggle, I got the nut to stop spinning and cranked down hard. The nut is now embedded much deeper in the stem than before, a good sign that I might have some luck removing it someday.
But that's not my plan. I can hopefully go the rest of my life without ever loosening this bolt now. If the bars go, the stems go, and what I have put together let no man separate.
#52
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,047
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,388 Times
in
3,673 Posts
You would probably have to shim it and that will also put pressure on the nut side so it may bind the back side too much.
#53
Senior Member
Join Date: Oct 2016
Location: Cambridge UK
Posts: 852
Bikes: 1903 24 spd Sunbeam, 1927 Humber, 3 1930 Raleighs, 2 1940s Sunbeams, 2 1940s Raleighs, Rudge, 1950s Robin Hood, 1958 Claud Butler, 2 1973 Colnago Supers, Eddie Merckx, 2 1980 Holdsworth, EG Bates funny TT bike, another 6 or so 1990s bikes
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 332 Times
in
185 Posts
Punch head and drill.
Centre punch the cap end, drill a 2mm hole say 5mm down. Force a allen key into drilled hole and rotate the nut off and grease the nut(not the head) before replacing.
#54
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,047
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,388 Times
in
3,673 Posts
#55
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,625
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3890 Post(s)
Liked 6,488 Times
in
3,211 Posts
Likes For SurferRosa:
Likes For smontanaro:
#57
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,816
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2440 Post(s)
Liked 3,133 Times
in
1,972 Posts
Ahhh! For some reason I was thinking the bar was still in it. That makes perfect sense now...and a solid idea.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#58
All Campy All The Time
Join Date: Nov 2013
Location: Richmond, Virginia
Posts: 1,417
Bikes: Listed in my signature.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 177 Post(s)
Liked 114 Times
in
63 Posts
If you spread that bar clamp too far open, the stem is likely to crack and break later.
__________________
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
#59
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,047
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,388 Times
in
3,673 Posts
#61
Senior Member
Join Date: Aug 2007
Location: Evanston, IL
Posts: 5,096
Bikes: many
Mentioned: 63 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 1,395 Times
in
762 Posts
That's a one-inch stem. In fact, I keep that riser stem with my tools. I use it on occasion to help round out seat tubes which have been ovalized.
Likes For smontanaro:
#62
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,047
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,388 Times
in
3,673 Posts