Thick Padded Gloves
#1
Full Member
Thread Starter
Thick Padded Gloves
Anyone try these
https://www.louisgarneau.com/en_us/a...gloves-1481183
Looking for a thick padded glove. I have nerve damage from a previous injury.
https://www.louisgarneau.com/en_us/a...gloves-1481183
Looking for a thick padded glove. I have nerve damage from a previous injury.
#2
Full Member
I suffer from poor circulation issues in my hands. I tried a pair of those gloves with high hope's. Unfortunately reality did not live up to expectations. The extra padding is truly there, but it feels as 'blocky' as it looks. My hands were constantly sliding off the blocks resulting in comfort and control issues. I finally gave up on finding glove based solutions and started double wrapping my bars.
#3
Senior Member
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 6,885
Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel, Specialized Epic Evo
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 3242 Post(s)
Liked 2,089 Times
in
1,182 Posts
I suffer from poor circulation issues in my hands. I tried a pair of those gloves with high hope's. Unfortunately reality did not live up to expectations. The extra padding is truly there, but it feels as 'blocky' as it looks. My hands were constantly sliding off the blocks resulting in comfort and control issues. I finally gave up on finding glove based solutions and started double wrapping my bars.
#4
Full Member
#5
Senior Member
Join Date: Jan 2013
Posts: 2,682
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 587 Times
in
411 Posts
Osteoarthritis in my hands makes this a challenge for me and I have gone from bike gloves to anti-vibration gloves for guys that use jack hammers all day and they provide better dampening, available at industrial supplier and Amazon.. As for under tape padding the tape makers sell, the thin tiny stuff that does not work at all for me even on the drops. I get shoe gel insoles and cut them down to fit my bars.
Likes For easyupbug:
#7
Just Pedaling
Join Date: Oct 2021
Location: US West Coast
Posts: 1,014
Bikes: YEP!
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 334 Post(s)
Liked 522 Times
in
348 Posts
I suffer from poor circulation issues in my hands. I tried a pair of those gloves with high hope's. Unfortunately reality did not live up to expectations. The extra padding is truly there, but it feels as 'blocky' as it looks. My hands were constantly sliding off the blocks resulting in comfort and control issues. I finally gave up on finding glove based solutions and started double wrapping my bars.
Likes For SpedFast:
#8
Full Member
Thread Starter
Osteoarthritis in my hands makes this a challenge for me and I have gone from bike gloves to anti-vibration gloves for guys that use jack hammers all day and they provide better dampening, available at industrial supplier and Amazon.. As for under tape padding the tape makers sell, the thin tiny stuff that does not work at all for me even on the drops. I get shoe gel insoles and cut them down to fit my bars.
Thanks for the tip!
#9
Junior Member
GripGrab makes gloves with excellent padding: https://www.gripgrab.com/collections...-summer-gloves Used them for years,they are well-made and do the job for keeping my arthiritis-related issues under control. I also use these under my gloves and they add to the protection: https://www.amazon.com/Hot-Glove-Sti.../dp/B006I37R36 Again, these are a good product and have lasted me 3 seasons now.
John
John
#10
Commuter
Join Date: Jun 2022
Location: SE Wisconsin, USA
Posts: 541
Bikes: Main Bikes: 2023 Trek Domane AL3, 2022 Aventon Level.2 eBike, 1972 Schwinn Varsity, 2024 Priority Apollo 11
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 238 Post(s)
Liked 323 Times
in
196 Posts
I haven't tried those, but have some gloves with thicker padding.
What made a much bigger difference for me was installing gel pads under the handlebar wrap, as suggested by a helpful member here.
What made a much bigger difference for me was installing gel pads under the handlebar wrap, as suggested by a helpful member here.
#11
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,330
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,838 Times
in
2,231 Posts
Haven't tried those gloves, but other L. Garneau products I have owned were the first to wear out, Shoes and a jersey. (Not saying a bad product, just always 1st worn out. )
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#12
Senior Member
Join Date: Apr 2007
Posts: 6,763
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
I used to be minimalist and happy - thin tape, unpadded gloves. Now, I use gel under cushy tape and padded gloves... and on my gravel bike, a ShockStop stem.
#13
Senior Member
On my old road race bike, to reduce hand pain:
- bullhorn bars, angled slightly up, for more grip area
- what used to be called "Grab-Ons", thick dense foam you put on the bars, no tape
- clip-on aero bars to take pressure off hands, all pressure then on forearms, easy
Still, I went to a recumbent for a couple years, it was flat there. In hills, no, I needed to stand on the pedals.
My current bike has a bit more upright handlebar, flat bar, with bar-ends, and the onces I found are oversize diameter, better. Can't find grab-ons in that size. For now, just took some closed-cell urethane padding and taped it around the bar-ends. I was thinking of going back to bullhorn bars but the flat bar with bar ends has much wider spacing so is a lot more comfortable. I also have clip-on aeros with wider forearm pad spacing than my old road race bike.
- bullhorn bars, angled slightly up, for more grip area
- what used to be called "Grab-Ons", thick dense foam you put on the bars, no tape
- clip-on aero bars to take pressure off hands, all pressure then on forearms, easy
Still, I went to a recumbent for a couple years, it was flat there. In hills, no, I needed to stand on the pedals.
My current bike has a bit more upright handlebar, flat bar, with bar-ends, and the onces I found are oversize diameter, better. Can't find grab-ons in that size. For now, just took some closed-cell urethane padding and taped it around the bar-ends. I was thinking of going back to bullhorn bars but the flat bar with bar ends has much wider spacing so is a lot more comfortable. I also have clip-on aeros with wider forearm pad spacing than my old road race bike.
Likes For Duragrouch: