Huret Jubilee on a Simplex hanger?
#1
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
Huret Jubilee on a Simplex hanger?
I'm pretty sure I already know the answer but is there anyway to do it without drewing the hanger? Then again, would it technically be "drewing" if said Simplex hanger was on a straight and rust free French mid level Reynolds 531 frameset with bad paint, bad chrome and bad graphics with no hope of ever being cosmetically restored? I have a '73-ish Gitane TdF and a '77-ish Peugeot PR-10 frameset that both fit that description and only enough good Simplex pieces to build one. I just got a pretty decent buy on a mechanically sound but less than beautiful Huret Jubilee RD and DT shifters and thought it might be fun to use them on the other paired with an even uglier Zeus FD and Zeus brakes. They're extras I got when buying Zeus parts for the '72 Raleigh Competition.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#2
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,985
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26425 Post(s)
Liked 10,381 Times
in
7,209 Posts
.
...are you talking about threading the hole and building a stop at the Huret position ? I think that's allowed in the rules. If it comes down to it, someone can still mount a Simplex or a Shimano Crane rear derailleur on the hanger in the future. Cutting it off completely is ill advised.
...are you talking about threading the hole and building a stop at the Huret position ? I think that's allowed in the rules. If it comes down to it, someone can still mount a Simplex or a Shimano Crane rear derailleur on the hanger in the future. Cutting it off completely is ill advised.
__________________
Likes For 3alarmer:
#3
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,951
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,912 Times
in
1,142 Posts
Does the Huret have the positioning bars in the body? If so there are a number of plates that can position the derailleur body in the correct way. I have found a number of the them on the inter-web. Smiles, MH
#4
blahblahblah chrome moly
Join Date: Apr 2009
Location: Seattle
Posts: 1,994
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1181 Post(s)
Liked 2,576 Times
in
1,076 Posts
Tap the hole M10 and file the bottom edge only the amount necessary to make a stop for the Jubilee.
Who's even going to know? It'll be our little secret.
Likes For bulgie:
#5
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,831 Times
in
1,997 Posts
The Jubilee was produced in at least two versions, one for the Huret for Huret dropout or Huret “claw”.
‘the image in the original post appears to me as for a Huret for Huret form factor.
a Simplex can be modified, will require modification, the Huret is essentially a double stop design, one leading and one trailing. Reference one before you attack.
probably will require tapping too, 10x1.
there are various bolts for the derailleur, one used a backside fastener Inside! The pivot bolt, expanding the slotted threaded end.
Or if long enough Huret used a jam nut to control the “slop”.
‘the image in the original post appears to me as for a Huret for Huret form factor.
a Simplex can be modified, will require modification, the Huret is essentially a double stop design, one leading and one trailing. Reference one before you attack.
probably will require tapping too, 10x1.
there are various bolts for the derailleur, one used a backside fastener Inside! The pivot bolt, expanding the slotted threaded end.
Or if long enough Huret used a jam nut to control the “slop”.
#6
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
Thanks all. Now to decide which frameset.
According to Disraeli Gears there was also a model made to fit Campag hangers the first couple years of production but very rare and pricey.
According to Disraeli Gears there was also a model made to fit Campag hangers the first couple years of production but very rare and pricey.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#7
Senior Member
I have a 74 Motobecane Grand Jubile f&f with Huret dropout. Frame swap?
__________________
I.C.
I.C.
#8
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
#9
Full Member
Join Date: Sep 2017
Location: Oklahoma City
Posts: 244
Bikes: 1985 Roberts SLX, Mercian 531, 1984 Torpado SLX,1981/82 Peugeot PSV-10, 1978 Charlie Roberts full touring, 1970 Charlie Roberts 531 road.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 164 Times
in
61 Posts
Thought this Australian blog have a good article on the Huret mounting system. Got interested in the jubilee, and got two for campag mounts off eBay a long while back. They shift exceptionally well.
campagnolo delta brakes: Huret Jubilee RD: adapter for Campagnolo dropouts
campagnolo delta brakes: Huret Jubilee RD: adapter for Campagnolo dropouts
#11
Senior Member
#13
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
The derailleur and other pieces arrived and the derailleur is actually in pretty nice shape, better than it looks in the pictures. It deserves to be on something decent looking.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile:
#14
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
Taking the easy way out, I have a '76 Raleigh Super Course frameset I bought with the intentions of repainting with a '71 Raleigh paint color. Worksop built, Reynolds 531 main triangle, good chrome, no RD hanger and I have a Huret RD claw.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#15
Full Member
Join Date: Jul 2018
Location: WNY
Posts: 444
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 177 Post(s)
Liked 313 Times
in
162 Posts
At least some of the 25” 1976 Super Course frames had forged Huret dropouts. Maybe not all, but some, like mine, did, so keep your eyes peeled.
Oddly, mine came with the “Italienne” version Jubilee RD that fits campy dropouts, so it needed an adapter washer to fit the Huret dropout.
Oddly, mine came with the “Italienne” version Jubilee RD that fits campy dropouts, so it needed an adapter washer to fit the Huret dropout.
__________________
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
#16
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
At least some of the 25” 1976 Super Course frames had forged Huret dropouts. Maybe not all, but some, like mine, did, so keep your eyes peeled.
Oddly, mine came with the “Italienne” version Jubilee RD that fits campy dropouts, so it needed an adapter washer to fit the Huret dropout.
Oddly, mine came with the “Italienne” version Jubilee RD that fits campy dropouts, so it needed an adapter washer to fit the Huret dropout.
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
#17
Junior Member
Join Date: Oct 2006
Location: Petaluma, CA
Posts: 125
Bikes: too many
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 82 Times
in
34 Posts
Trying to understand the various versions of the Jubilee RD always makes my head hurt, but I found this
write-up that is pretty easy to understand:
https://note.com/aki233/n/n1248c58d9177
It's in Japanese, but using Google Translate makes it quite readable.
I pulled out my 4 Jubilees and the aftermarket adaptor kit from my stash, and think I now get the general drift.
I think the aftermarket adapter kit is a reproduction of Huret part # 2333, which came with some later versions
of the Jubilee RD to make them fit a Campagnolo dropout and add B screw function.
There are NOS Huret part # 2364 bits for sale on the auction site by seller Idealvelo. PM me and I'll send you the link.
These look like they could be modified to look and function like part # 2333.
Also found and purchased a Huret rear dropout.
At some point in the future, I'll make 3D models of the Huret dropout, a Campagnolo dropout, and the adapter kit to
illustrate how these all work.
I don't know how a Simplex dropout differs from a Campagnolo dropout, so all of the above doesn't directly answer the
question, but hopefully sheds some light...
write-up that is pretty easy to understand:
https://note.com/aki233/n/n1248c58d9177
It's in Japanese, but using Google Translate makes it quite readable.
I pulled out my 4 Jubilees and the aftermarket adaptor kit from my stash, and think I now get the general drift.
I think the aftermarket adapter kit is a reproduction of Huret part # 2333, which came with some later versions
of the Jubilee RD to make them fit a Campagnolo dropout and add B screw function.
There are NOS Huret part # 2364 bits for sale on the auction site by seller Idealvelo. PM me and I'll send you the link.
These look like they could be modified to look and function like part # 2333.
Also found and purchased a Huret rear dropout.
At some point in the future, I'll make 3D models of the Huret dropout, a Campagnolo dropout, and the adapter kit to
illustrate how these all work.
I don't know how a Simplex dropout differs from a Campagnolo dropout, so all of the above doesn't directly answer the
question, but hopefully sheds some light...
Likes For retroman57:
#18
Senior Member
Thread Starter
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 3,254
Bikes: More than there were awhile ago.
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 638 Post(s)
Liked 1,297 Times
in
612 Posts
__________________
".....distasteful and easily triggered."
".....distasteful and easily triggered."
Likes For Murray Missile: