Show Your Elevated Chainstay Bikes
#1
Henderson, NV
Thread Starter
Join Date: Jan 2022
Location: Henderson/Las Vegas NV
Posts: 621
Bikes: Trek Alpha 3700, GT STS DH, Raleigh Grand Prix, Fisher Montare, Fisher CR-7, Fisher Aquila, Diamondback Sorrento, The Bike Beat Revolution, KHS XC 504R
Liked 685 Times
in
338 Posts
Show Your Elevated Chainstay Bikes
Posting here in C&V since my thread had no traction in the MTB subforum.
Post up your elevated chainstay bikes.
Mine is a 1990 Ellison frame The Bike Beat Revolution. SunTour XC Pro equipped.
Post up your elevated chainstay bikes.
Mine is a 1990 Ellison frame The Bike Beat Revolution. SunTour XC Pro equipped.
#2
Full Member
Join Date: Jul 2013
Location: Southern California
Posts: 498
Bikes: Historical: Schwinn Speedster; Schwinn Collegiate; 1981 Ross Gran Tour; 1981 Dawes Atlantis; 1991 Specialized Rockhopper. Current: 1987 Ritchey Ultra; 1987 Centurion Ironman Dave Scott Master; 1992 Specialized Stumpjumper FS
Liked 181 Times
in
114 Posts
Sweet bike and Camaro!
I like the article: " ... the bike wasn't built to be light, but to avoid aluminum bikes' bad history of breakage problems." Wow, decades of that.
I like the article: " ... the bike wasn't built to be light, but to avoid aluminum bikes' bad history of breakage problems." Wow, decades of that.
#3
I feel that bike is begging for a 3 cog suntour rear derailleur. The design of that one followed the same path of ignoring what was the norm in search for a better way to handle a singular issue. In the case of the derailleur excessive chain slap.
It too failed to win the minds and souls of the public...
It too failed to win the minds and souls of the public...
#4
Cantilever believer
Does this qualify? It does have the squishy part in the middle.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Likes For RCMoeur:
#5
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,743
Liked 3,941 Times
in
2,688 Posts
#6
Same-same with early aluminum and carbon tubing bonded to metal lugs. There may have been a handful of bikes that suffered from that early on and now all are suspect. I'm yet to see one fail this way. On the other hand I have seen cracked carbon and fatigued aluminum but that's not what people obsess about.
#7
Senior Member
Couldn't have been all that big a problem, anyway, because aluminum was well on its way to becoming the overwhelmingly dominant choice for high-performance off-road bike frames. And for road bike frames, too, of course; in fact, aluminum road bikes still substantially outsell both carbon and steel road bikes.
#8
Senior Member
I feel that bike is begging for a 3 cog suntour rear derailleur. The design of that one followed the same path of ignoring what was the norm in search for a better way to handle a singular issue. In the case of the derailleur excessive chain slap.
It too failed to win the minds and souls of the public...
It too failed to win the minds and souls of the public...
In any event, it was a friction-only derailleur, so it would have been gone soon anyway.
https://www.disraeligears.co.uk/site...ey_system.html
Last edited by Trakhak; 09-20-23 at 03:32 PM.
Likes For Desert Ryder:
#10
Senior Member
1990 Haro Impulse Comp. Really could use a shot of Deore in the driveline.
Likes For madpogue:
#11
Cantilever believer
"Swing"arm? That would explain all the interesting credit card charges when it mysteriously disappears...
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
#12
Cantilever believer
You mean the three-pulley Suntour XC. I vaguely recall that those didn't hold up well; rapid pulley wear, maybe? [Edit: see link below; I was remembering the first version: the Mountech.]
In any event, it was a friction-only derailleur, so it would have been gone soon anyway.
https://www.disraeligears.co.uk/site...ey_system.html
In any event, it was a friction-only derailleur, so it would have been gone soon anyway.
https://www.disraeligears.co.uk/site...ey_system.html
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Likes For RCMoeur:
#13
Senior Member
I bought a Zebrakenko just for the three-pulley LePree installed on it. The plan is to sell the LePree, then swap on some more common Suntour mech and flip the bike.
#14
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,356
Bikes: Still have a few left!
Liked 562 Times
in
275 Posts
Here's my 91 Fisher Montare. showed up on Portland CL 4 years ago, grabbed it because of unusual frame + low price, so why not? Just needed Clean/Lube/Adjust plus new grips, co-op fenders & saddle shown here to become a favorite rider. Recently replaced both tires which had started cracking.
1991? Fisher Montare
Don
1991? Fisher Montare
Don
Last edited by ollo_ollo; 09-21-23 at 10:42 AM. Reason: spelling
Likes For ollo_ollo:
#15
Cantilever believer
That reminds me: one of the reasons I'm not a fan of elevated chainstays is because... it makes kickstand mounting more complicated.
(now awaiting the onslaught of vituperative abuse for mentioning the "k" word...)
(now awaiting the onslaught of vituperative abuse for mentioning the "k" word...)
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Likes For RCMoeur: