Post Your Titaniums
#952
Senior Member
Join Date: Feb 2004
Location: My family and I -- wife and two young children -- live in Vancouver, British Columbia, Canada
Posts: 723
Bikes: TST ti 'cross bike (commuter); Guru ti road bike; recumbent; Airnimal Chameleon folding racing bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Beautiful bike, Marqueemoon!
With much help from this forum (thanks!), I built up this Odonata over the summer, my first build. All DA, Ouzo Pro, Masterpiece, Toupe. Although it pales next to most of the bikes in this post, it was fun to build and the bike suits this old guy like a dream.
With much help from this forum (thanks!), I built up this Odonata over the summer, my first build. All DA, Ouzo Pro, Masterpiece, Toupe. Although it pales next to most of the bikes in this post, it was fun to build and the bike suits this old guy like a dream.
What's the handlebar on there?
#953
Senior Member
Join Date: Feb 2004
Location: My family and I -- wife and two young children -- live in Vancouver, British Columbia, Canada
Posts: 723
Bikes: TST ti 'cross bike (commuter); Guru ti road bike; recumbent; Airnimal Chameleon folding racing bike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
[QUOTE=xJAHx;7460635]Well, through building wheels for a local shop and selling their demo'ed bits, I am fortunate enough to have an endless supply of Ti bikes in the stable:
No offence but I think your bike must be slightly small for you. You've got your seat set back as far as it will go, I see. And your bars look like very long reach bars.
I'm afraid you'll have to hand it over. (Just kidding. But not about the sizing. Ever try a setback seatpost? Some swear by them.)
No offence but I think your bike must be slightly small for you. You've got your seat set back as far as it will go, I see. And your bars look like very long reach bars.
I'm afraid you'll have to hand it over. (Just kidding. But not about the sizing. Ever try a setback seatpost? Some swear by them.)
#954
Member
Join Date: Dec 2006
Location: Mid West
Posts: 39
Bikes: SWork Tarmac; Merlin CR3/2.5 Works; Scott S1 Speedster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My new build Meriln
It was an unused 2006 frame. I thought the original fork was a little noodly, so I put my Scott S1 Speedster fork on it. It's a very stiff fork and I think it matches rather well. I have an SWork Tarmac, but I find myself riding this bike 80% of the time.
Attachment 83918
Attachment 83918
Last edited by Roadplay; 10-14-08 at 10:56 AM.
#957
Member
Join Date: Dec 2006
Location: Mid West
Posts: 39
Bikes: SWork Tarmac; Merlin CR3/2.5 Works; Scott S1 Speedster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks. It’s funny you asked about the handlebars, because that was the hardest piece of the puzzle for me. I tried three sets and finally settled on a set of short reach bars: FSA Wing Pro Compact Rd 42cm 31.8 Aero (aluminum).
#958
Senior Member
Join Date: Dec 2005
Location: Anywhere the government sends me...
Posts: 930
Bikes: Too many...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thought I'd post a new pic with recent changes:
Easton SLX to GS-30
Mavic SSCs to Negative G's
Stronlight Vulcans to Fission CT2s
Easton SLX to GS-30
Mavic SSCs to Negative G's
Stronlight Vulcans to Fission CT2s
#959
Member
Join Date: Aug 2006
Location: Southern Maine
Posts: 44
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
It, too, is the FSA Wing Pro Compact (shallow), 44cm. Short reach and shallow drop enable more riding positions, given my inflexibility, Fred or not.
Just realized my photo is Fred, too, taken from non-drive side. Oh, well....
#960
grilled cheesus
i mean, me likes.
later.
__________________
#961
Senior Member
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 4,466
Bikes: many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 16 Times
in
13 Posts
I posted this elsewhere, somewhere, but will repeat it here.
This is my newly built up Quintana Roo Santo. Even though this setup looks like a tri bike, it is actually used as one of my road bikes. The configuration is based on years of riding, understanding what I need for a fit, and my geographic riding routes.
First, I like a steep seatpost. The Santo is 76.5.
Second, I ride in a combination of Scottsdale suburban areas on to semi rural ranchette areas. I like riding on properly setup aerobars and can safely ride on the aerobars for abou 50% of my routes. As a result, I like my controls close at hand when I'm not on the bars. Thus the arrangement with the shifters on the bullhorns. When in the aero position, it is no big deal to move my hand over 6 inches to shift.
This bike has turned out to be very comfortable and makes a good all day ride. It also is very stable and rides straight as a razor.
This is my newly built up Quintana Roo Santo. Even though this setup looks like a tri bike, it is actually used as one of my road bikes. The configuration is based on years of riding, understanding what I need for a fit, and my geographic riding routes.
First, I like a steep seatpost. The Santo is 76.5.
Second, I ride in a combination of Scottsdale suburban areas on to semi rural ranchette areas. I like riding on properly setup aerobars and can safely ride on the aerobars for abou 50% of my routes. As a result, I like my controls close at hand when I'm not on the bars. Thus the arrangement with the shifters on the bullhorns. When in the aero position, it is no big deal to move my hand over 6 inches to shift.
This bike has turned out to be very comfortable and makes a good all day ride. It also is very stable and rides straight as a razor.
#962
Member
Join Date: Dec 2006
Location: Mid West
Posts: 39
Bikes: SWork Tarmac; Merlin CR3/2.5 Works; Scott S1 Speedster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Interesting!!! I know you said it’s good for long commutes, but have you ever gone on group rides with that brake / shifter combination?
#963
Senior Member
Join Date: Sep 2007
Location: Scottsdale, AZ
Posts: 4,466
Bikes: many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 16 Times
in
13 Posts
Almost all of my rides are solo. I started out as a distance runner and solo workouts have always been the norm.
Certainly, this configuration is not quite as quick as brifters, but it is light years faster than down tubes or bar ends (on drops).
Certainly, this configuration is not quite as quick as brifters, but it is light years faster than down tubes or bar ends (on drops).
Last edited by RFC; 10-15-08 at 03:20 PM.
#964
Who is Austin Dunbar?
2008 Litespeed Icon
I have been riding it for several months now and finally got around to taking a picture.
Size Large frame with brushed finish and Easton EC 90 fork and Chris King headset
Full Dura-Ace except for the Campagnolo Chorus CT crank.
Mavic Ksyrium Elite wheels with Schwalbe Ultremo R tires and 11-23 cassette.
Deda Supernatural Bars and Easton EA90 stem
Ritchey WCS aluminum seatpost and WTB Rocket V saddle.
Time RXS Carbon pedals.
Zipp carbon cages and Camelbak bottles
Size Large frame with brushed finish and Easton EC 90 fork and Chris King headset
Full Dura-Ace except for the Campagnolo Chorus CT crank.
Mavic Ksyrium Elite wheels with Schwalbe Ultremo R tires and 11-23 cassette.
Deda Supernatural Bars and Easton EA90 stem
Ritchey WCS aluminum seatpost and WTB Rocket V saddle.
Time RXS Carbon pedals.
Zipp carbon cages and Camelbak bottles
#965
Senior Member
Join Date: Dec 2007
Location: NWNJ
Posts: 3,704
Bikes: Road bike is a Carbon Bianchi C2C & Grandis (1980's), Gary Fisher Mt Bike, Trek Tandem & Mongoose SS MTB circa 1992.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 722 Post(s)
Liked 353 Times
in
226 Posts
Here is my old school luvly Eddy Merckx Ti. Single speed for simplicity. I recently sold it so Icould buy a new Carbon beast.
#967
Senior Member
Join Date: Dec 2007
Location: Detroit
Posts: 282
Bikes: LS Archon T1, LS Ghisallo, QR TiPhoon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The Fleet is In.
Although these bikes are still evolving, here is how they look today.
Although these bikes are still evolving, here is how they look today.
#968
Living the n+1
Join Date: Mar 2005
Location: Off the back
Posts: 2,745
Bikes: 2019 RM Blizzard, 2013 SuperX, 2007 Litespeed Vortex, 1970 Falcon Olympic, 2008 RM Metropolis IGH, 2004 Specialized Enduro, 2006 Langster
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
^^ Wow! Nice collection!
#969
Junior Member
Join Date: Jun 2005
Location: brisbane, australia
Posts: 22
Bikes: seven axiom sg, scott cr1 pro
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
my seven bike
Had this made last November. I've taken it all over the place. Apart from packing times, it is awesome. The pic on the left was taken in an apt in Florence...where I wish I was right now..............
Last edited by mattylimbo; 11-13-08 at 11:37 PM.
#972
Senior Member
Join Date: Sep 2008
Location: London
Posts: 2,420
Bikes: Baum Romano, Brompton S2, Homemade Bamboo!
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 474 Post(s)
Liked 204 Times
in
129 Posts
I'm hoping that my next bike is Ti (all I got is the Ti watch at the mo )
The only Ti frames stocked in my area are Litespeed and Merlin (both in limited numbers), but the Motobecane bikes on Bikes Direct seem ridiculously cheap (ie I could ship one in for much less than a local build of one of the others). How does the Motobecane compare to your other bikes?
#974
Senior Member
Join Date: Apr 2006
Posts: 140
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Lynskey R320
Lynskey R320...It has some road rash from a crit is September where I was knocked into a guard rail at about 25 mph. The handlebars (carbon) ripped in half like they were tissue paper. The Lynskey survived in pretty good shape.
Best bike I've ever ridden.
Best bike I've ever ridden.
#975
Senior Member
Join Date: Jun 2005
Posts: 2,754
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts