Crank arm bolt torque on VP BC-73 cartridge bearing?
#1
Full Member
Thread Starter
Join Date: Aug 2020
Posts: 244
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 38 Times
in
27 Posts
Crank arm bolt torque on VP BC-73 cartridge bearing?
The VP website lists the bearing but doesn't specify the torque - anyone know what it should be?
Thanks!
Thanks!
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,096
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4210 Post(s)
Liked 3,878 Times
in
2,315 Posts
I suspect it's because that spec is a crank arm one and not a BB one. My quick search for an image of description of the BB shows a tapered square version. Generally these will see crank arms that "call out for" between 30 and40 ft lbs of torque for their retaining bolts. I believe the Park Tool Blue Book has many common torque ranges listed. Andy
__________________
AndrewRStewart
AndrewRStewart
Likes For Andrew R Stewart: