Zipp 182 Track Axle
#1
Zipp 182 Track Axle
The subject of the scarcity of track axles for older Zipp 900 discs has come up a few times and I mentioned recently that I was making one for a friend since I have a machine shop and an original axle to copy.
My version uses a stainless washer instead of the flimsy carbon cover and the washer is held in place with a snap ring that holds it up against a small wavy washer on a shoulder. This means it doesn't rotate or other wise move around and has a close fit to the freehub side of the disc.
If anyone needs one or knows someone who does I can certainly make more. Contact me for more details (hope that's not against forum rules).
My version uses a stainless washer instead of the flimsy carbon cover and the washer is held in place with a snap ring that holds it up against a small wavy washer on a shoulder. This means it doesn't rotate or other wise move around and has a close fit to the freehub side of the disc.
If anyone needs one or knows someone who does I can certainly make more. Contact me for more details (hope that's not against forum rules).
Likes For rustymongrel:
#2
Elitist
Damn, that’s nice.
Also, I think it’s fine to discuss what you’ve made as long as you don’t overtly offer them for sale in these threads. Only paying advertisers are allowed to do that (which is also an option for you).
Edit: I’m no longer a moderator. But that’s how I understood the rules and enforced them when I was.
Also, I think it’s fine to discuss what you’ve made as long as you don’t overtly offer them for sale in these threads. Only paying advertisers are allowed to do that (which is also an option for you).
Edit: I’m no longer a moderator. But that’s how I understood the rules and enforced them when I was.
#3
Elitist
You can also offer them for trade in the trade thread. What you and the other person decide to trade is up to you two.
Likes For Morelock:
#7
This is awesome.
#9
This is a rear wheel so never in contact with carbon. On the NDS you could do the threads short but on the other side the threads are needed for the lock nut to preload the bearings.
#10
Lapped 3x
I just had this pop up on my FB feed, and realized that rustymongrel and I live in the same city. Small world!
Likes For taras0000:
#13
Senior Member
Hm. I'm going to have to add Zipp rear discs to my search now.
__________________
"...during the Lance years, being fit became the No. 1 thing. Totally the only thing. It’s a big part of what we do, but fitness is not the only thing. There’s skills, there’s tactics … there’s all kinds of stuff..." Tim Johnson
"...during the Lance years, being fit became the No. 1 thing. Totally the only thing. It’s a big part of what we do, but fitness is not the only thing. There’s skills, there’s tactics … there’s all kinds of stuff..." Tim Johnson
#14
I just had this pop up on my FB feed, and realized that rustymongrel and I live in the same city. Small world!
been a number of takers on Facebook and through Instagram. I’m going have to pick up some more stainless bar.
#15
Senior Member
Really nice work!!!
I did a rear to front conversion a while ago, using a titanium tube (and tube stubs). For quick release. Tube/shaft collars to center.
I can get better photos of anybody wants.
I did a rear to front conversion a while ago, using a titanium tube (and tube stubs). For quick release. Tube/shaft collars to center.
I can get better photos of anybody wants.
#16
Lapped 3x
#18
email me at senkofabrication at gmail.com
#19
Hey, so I’ve gotten a few emails from folks finding this thread and at least once it appeared that my replies were going to the persons spam folder and we failed to connect. If you have contacted me and haven’t heard back check your spam folder or try again. Thanks!
#20
Newbie
Join Date: Jul 2020
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
Do you happen to have any extras?
Hey, so I’ve gotten a few emails from folks finding this thread and at least once it appeared that my replies were going to the persons spam folder and we failed to connect. If you have contacted me and haven’t heard back check your spam folder or try again. Thanks!
#21
Newbie
Join Date: Nov 2020
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
Can you make us one of the 182 hub track axles?
Can you still make a few more? Would love to get one.
John
John
The subject of the scarcity of track axles for older Zipp 900 discs has come up a few times and I mentioned recently that I was making one for a friend since I have a machine shop and an original axle to copy.
My version uses a stainless washer instead of the flimsy carbon cover and the washer is held in place with a snap ring that holds it up against a small wavy washer on a shoulder. This means it doesn't rotate or other wise move around and has a close fit to the freehub side of the disc.
If anyone needs one or knows someone who does I can certainly make more. Contact me for more details (hope that's not against forum rules).
My version uses a stainless washer instead of the flimsy carbon cover and the washer is held in place with a snap ring that holds it up against a small wavy washer on a shoulder. This means it doesn't rotate or other wise move around and has a close fit to the freehub side of the disc.
If anyone needs one or knows someone who does I can certainly make more. Contact me for more details (hope that's not against forum rules).
#22
#23
Newbie
Join Date: Jan 2021
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
Hi Rustymongrel,
Regarding the 182 track axle for a zipp 900 disc, what a great job you have done with this, looks better that factory zipp. So I'm in the same predicament as many, need an axle, would it be possible to make more? I'm very keen to purchase.
Kind regards
Scott
Regarding the 182 track axle for a zipp 900 disc, what a great job you have done with this, looks better that factory zipp. So I'm in the same predicament as many, need an axle, would it be possible to make more? I'm very keen to purchase.
Kind regards
Scott
#24
Newbie
Join Date: Feb 2021
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
182 track axle....
Hope I'm not too late to the game?
I just joined the forum so I can't message yet, but if you see this I'm most interested in one of your axles. I have a LOT of parts and stuff to trade. Please contact me if you have time.
Thanks
I just joined the forum so I can't message yet, but if you see this I'm most interested in one of your axles. I have a LOT of parts and stuff to trade. Please contact me if you have time.
Thanks