[chain] wrap your heads around this boys and girls...pretty cool
#1
Senior Member
Thread Starter
[chain] wrap your heads around this boys and girls...pretty cool
pretty darn fricken neat, talk about thinking sideways or outside of the box.
yes, probably really more appropriate for the mtb gang, but it's so cool, I had to share it with you lot.
https://www.pinkbike.com/news/first-...9a42-123259340
yes, probably really more appropriate for the mtb gang, but it's so cool, I had to share it with you lot.
https://www.pinkbike.com/news/first-...9a42-123259340
Likes For djb:
#2
Full Member
Ok. And it's better than a Rohloff because . . . . . ?
#3
Senior Member
Thread Starter
havent a clue, just thought it was neat.
my guess is lighter and more efficient, but hey, like I said, I haven't a clue. just cool.
my guess is lighter and more efficient, but hey, like I said, I haven't a clue. just cool.
#4
Senior Member
Cool, but seems overly complex. Back in my MTBing days a broken derailleur from a stick in the spokes was a common occurrence. We'd make sure that one rider in the group carried a chain rivet tool. If someone snapped their derailleur we'd shorten their chain to fit one combo of chainring/cog and the victim would complete the ride in their single chosen gear. When home they would call 1-800-NASHBAR and order a new derailleur. It would arrive two days later. Often the dropout would also be bent and need straightening with a big adjustable wrench. Problem solved!
Last edited by BobG; 11-18-21 at 06:42 PM. Reason: sp
#5
Occam's Rotor
Join Date: Jul 2013
Posts: 7,248
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 2,331 Times
in
1,164 Posts
The Principle of Parsimony sheds yet another tear for humanity.
#6
Senior Member
Thread Starter
I agree, derailleurs work pretty darn well, for me anyway, but I still am impressed by someone who comes up with a totally different way of approaching a given, existing system
that's really why I put this up.
that's really why I put this up.
Likes For djb:
#7
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,214
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3462 Post(s)
Liked 1,468 Times
in
1,145 Posts
And once again I am reminded of why I bought a Rohloff bike for the rougher terrain.
But for a full suspension bike, the Rohloff adds unsprung weight. The Pinion system solves that.
But for a full suspension bike, the Rohloff adds unsprung weight. The Pinion system solves that.
Likes For Tourist in MSN:
#8
Full Member
Join Date: Sep 2005
Location: Tulsa, OK
Posts: 451
Bikes: Co-Motion Americano Pinion P18; Co-Motion Americano Rohloff; Thorn Nomad MkII, Robert Beckman Skakkit (FOR SALE), Santana Tandem, ICE Adventure FS
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 64 Times
in
48 Posts
Interesting, but
Interesting design but probably not going to go mainstream unless someone like Shimano copies/steals the design. My first thought was is it possibly to get my calf eaten by the upper chain ring. Also, how is the chain wear? Can really tell how much angle it has from the BB chain ring to the upper chain ring. But, yeah overall it is in interesting design. Good to see a young guy use his creative talents and engineering skills for this.
#10
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,852
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
Nice to see a kid (he was 24 when he started developing this) dive into something like this, patent(pending) it, and bring it to market. Not an easy task at any age, but tougher without 20 years of experience, and contacts, to lean back on.
I don't doubt (if**) Shimano or SRAM have designs like this on the books, but they'd decided whether to go to market based on the total sales opportunity minus costs and how much their other products lines will be cannibalized. The kid that developed this drive isn't working under the umbrella of "it can't be done". ""It can't be done, but I did it" is where new stuff comes from. (I'm retired from RD&E)
(** The if thing come from a practice of defensive patenting. If one of the majors had developed a design such as this they might well patent it as, even if it wasn't economical to commercialize themselves, a patent would prevent others from bringing it to market..except in China..)
The market & particularly young consumers (we know..the ones that marketers target as they can be "sold" and will spend the money..this isn't targeted, from a marketing standpoint, at the 50+ crowd) love something new they can rally around. Whether it actually solves a problem inherent in traditional designs is only part of its utility. The industry it creates is the real plus..lots of, primarily young, people will get involved in further development and manufacture of the drive system and bike frames to accommodate it. They'll learn something and have new ideas which sparks something else...all good. I hope they do well.
While this invention likely won't change the world, a Margaret Mead quote comes to mind, "Never doubt that a small group of thoughtful committed individuals(or just one) can change the world. In fact, it's the only thing that ever has."
A pic posted may help as a reference..
I don't doubt (if**) Shimano or SRAM have designs like this on the books, but they'd decided whether to go to market based on the total sales opportunity minus costs and how much their other products lines will be cannibalized. The kid that developed this drive isn't working under the umbrella of "it can't be done". ""It can't be done, but I did it" is where new stuff comes from. (I'm retired from RD&E)
(** The if thing come from a practice of defensive patenting. If one of the majors had developed a design such as this they might well patent it as, even if it wasn't economical to commercialize themselves, a patent would prevent others from bringing it to market..except in China..)
The market & particularly young consumers (we know..the ones that marketers target as they can be "sold" and will spend the money..this isn't targeted, from a marketing standpoint, at the 50+ crowd) love something new they can rally around. Whether it actually solves a problem inherent in traditional designs is only part of its utility. The industry it creates is the real plus..lots of, primarily young, people will get involved in further development and manufacture of the drive system and bike frames to accommodate it. They'll learn something and have new ideas which sparks something else...all good. I hope they do well.
While this invention likely won't change the world, a Margaret Mead quote comes to mind, "Never doubt that a small group of thoughtful committed individuals(or just one) can change the world. In fact, it's the only thing that ever has."
A pic posted may help as a reference..
Last edited by fishboat; 11-19-21 at 08:46 AM.
#11
Senior Member
Join Date: Nov 2010
Location: Minnesota
Posts: 857
Bikes: Cannondale '92 T600 '95 H600 '01 RT1000
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 109 Times
in
82 Posts
Hmmm, yes, while quite ingenious, I think he's got an uphill battle with success. Needing a custom frame for it seems like a really big roadblock, and then convincing cyclists that parts will be available for a loooong time, etc.
#12
Old enough, hmmm?
Reminder to myself Have to listen to his records more often.
Of course the other one would be Albert Einstein's: “Everything should be made as simple as possible, but no simpler.”
Naturally there will always be people who follow the "Rube Goldberg Way"
Last edited by OldRailfan; 11-23-21 at 10:31 AM.
Likes For OldRailfan:
#13
Senior Member
Join Date: Mar 2015
Posts: 209
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Liked 51 Times
in
35 Posts
This product isn’t intended for anyone on this board. There is a problem with long-travel full suspension downhill MTBs called “chain growth” - DH bikes these days are considered to work much better with very high rear suspension pivot points and a rearward contact patch track on compression. Problem is, with traditional cranks and chainline this produces a massive kick into the pedals on big hits, and worst case can pull chains apart unless you put a secondary freewheel in the crank, or switch to a high idler pulley like this that’s concentric with the upper pivot. This design seems to additionally move the derailleur inside the chain stay for protection, which makes sense for hardcore MTBs. Pinkbike is basically a hardcore MTB site at this point…
Another more conventional high pivot design that’s getting a lot of good MTB press: https://www.pinkbike.com/news/review...rail-bike.html
Plenty more examples in the MTB world if you cared to search for ‘high idler pulley’
nothing to do with touring unless your tours involve 60 foot hucks and a Red Bull helicopter hovering overhead and filming you
Another more conventional high pivot design that’s getting a lot of good MTB press: https://www.pinkbike.com/news/review...rail-bike.html
Plenty more examples in the MTB world if you cared to search for ‘high idler pulley’
nothing to do with touring unless your tours involve 60 foot hucks and a Red Bull helicopter hovering overhead and filming you
Last edited by fourfa; 11-19-21 at 04:06 PM.
Likes For fourfa:
#14
Senior Member
Thread Starter
This product isn’t intended for anyone on this board. There is a problem with long-travel full suspension downhill MTBs called “chain growth” - DH bikes these days are considered to work much better with very high rear suspension pivot points and a rearward contact patch track on compression. Problem is, with traditional cranks and chainline this produces a massive kick into the pedals on big hits, and worst case can pull chains apart unless you put a secondary freewheel in the crank, or switch to a high idler pulley like this that’s concentric with the upper pivot. This design seems to additionally move the derailleur inside the chain stay for protection, which makes sense for hardcore MTBs. Pinkbike is basically a hardcore MTB site at this point…
Another more conventional high pivot design that’s getting a lot of good MTB press: https://www.pinkbike.com/news/review...rail-bike.html
Plenty more examples in the MTB world if you cared to search for ‘high idler pulley’
nothing to do with touring unless your tours involve 60 foot hucks and a Red Bull helicopter hovering overhead and filming you
Another more conventional high pivot design that’s getting a lot of good MTB press: https://www.pinkbike.com/news/review...rail-bike.html
Plenty more examples in the MTB world if you cared to search for ‘high idler pulley’
nothing to do with touring unless your tours involve 60 foot hucks and a Red Bull helicopter hovering overhead and filming you
and yes, specific frames and etc all make this a neat idea, but would it be able take over any of the specific market? Probably not.
#15
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,627
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1671 Post(s)
Liked 1,826 Times
in
1,062 Posts
Wrap your string head around this:
Likes For tcs:
#16
Senior Member
not sure how suitable for even moderately loaded touring with a 12-speed transmission. i imagine it would be great for commuting in new york or los angeles, not so great for touring in cambodia or mongolia. not when it can still take a couple days of riding to get to an area with cell reception, and not nowadays when it can take forever to get bog standard spare parts.
just a couple months ago we sent a priority ems letter from guangzhou (pop 15 million) to bangkok (pop 10 million) that took 4-1/2 weeks. the express return package took 6 weeks.
replacing drive parts will be a no-go, but at least if you've got the sense to mount it to a quality steel frame, any local village smithy should be able to repair a cracked frame and possibly bodge something together...........
#17
Senior Member
Thread Starter
#18
Senior Member
Thread Starter
Saddle, ya I know, I know.
but now you've put the image in my head of the hotdog truck driving around on the moon beside Tintins rocket.
but now you've put the image in my head of the hotdog truck driving around on the moon beside Tintins rocket.
#19
Senior Member
#22
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,627
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1671 Post(s)
Liked 1,826 Times
in
1,062 Posts
#23
Senior Member
Thread Starter
#24
Senior Member
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Not as complex but I have wanted to make a project bike with an IGH drive and a front derailer for a while now.
Rohloffs are nice but quite pricey. Instead, I could see a SA hub mated to a double or triple crank as an interesting alternative to 8ncrease gear range. All one would need extra is a chain tensioner. I've seen it done before in pics.
Experimenting is good.
Rohloffs are nice but quite pricey. Instead, I could see a SA hub mated to a double or triple crank as an interesting alternative to 8ncrease gear range. All one would need extra is a chain tensioner. I've seen it done before in pics.
Experimenting is good.
#25
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,214
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 3462 Post(s)
Liked 1,468 Times
in
1,145 Posts
When I first got my Rohloff, I disliked how far apart each gear was, but quickly got used to the the 13 percent jump.
But I can see wanting a wider range of gears with an IGH that has a lot fewer gears. The gears on my old three speed are much farther apart from each other, that could benefit from closer gears.
If you pursue this further, keep in mind that some IGHs use a 135mm dropout spacing, some narrower. You will need to get the frame to match your hub. I tried to eyeball a caliper on my three speed, it appears to have a dropout spacing of about 115mm, but that also has a drum brake, not sure if the non-brake version is the same. And mine was built when inches instead of mm were the norm, so mine might be 4.5 inches.
I think an IGH with a rear derailleur makes more sense than front derailleur, unfortunately the Sram Dual Drive is no longer sold, but I am told that Sturmey Archer makes a similar hub. I have a Dual Drive on my folding bike, the IGH gives me 3 speeds, the cassette is eight speeds, so I have 24 gears.
What is your goal?