Merz Mfg. frame build sheets
02-27-24, 09:13 AM
#1
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 231
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,487 Times
in
183 Posts
Merz Mfg. frame build sheets
https://goo.gl/photos/6ag59tRKvPLy1KnD8
I have shared this link on C & V in the past, but it was buried in other posts. There was a question about whether I made many large size frames on another post. Searching through these build sheets will confirm that there were quite a few. I don't have some of the early frame number build sheets, and there are a few missing numbers elsewhere. If you have time to waste, pursuing these sheets will reveal some interesting information. Jim
I have shared this link on C & V in the past, but it was buried in other posts. There was a question about whether I made many large size frames on another post. Searching through these build sheets will confirm that there were quite a few. I don't have some of the early frame number build sheets, and there are a few missing numbers elsewhere. If you have time to waste, pursuing these sheets will reveal some interesting information. Jim
Likes For Portlandjim:
02-27-24, 09:29 AM
#2
Pedal to the medal
Your meticulous records are certainly appreciated, thanks Jim!
02-27-24, 09:56 AM
#3
*____*
These are so cool to just poke through - and making this amount of info / knowledge publicly available is such a great thing! Ty!
02-27-24, 10:01 AM
#4
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,064
Bikes: 1965 dept store special, 1972 basket case, 1978 garden ornament, 1980 garbage heap, 1987 mutt, 1996 frankenstein
Liked 3,918 Times
in
1,584 Posts
I counted about 390+ build/order sheets. Nice!
Would it be accurate to say that the total production numbers were somewhere around 400-450 bicycles out there bearing the Merz name?
Would it be accurate to say that the total production numbers were somewhere around 400-450 bicycles out there bearing the Merz name?
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
02-27-24, 10:17 AM
#5
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 231
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,487 Times
in
183 Posts
02-27-24, 12:44 PM
#6
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,809
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,741 Times
in
1,155 Posts
So roughly Confente x 3 . . . .
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
02-27-24, 01:53 PM
#7
Full Member
Thread Starter
Join Date: May 2023
Location: Big Sur California
Posts: 231
Bikes: 1946 Holdsworth Cyclone, 1969 Cinelli SC, 1972 Raleigh Pro, 1973 Merz road bike, 1974 Alex Singer Sportif, 1974 Merz track bike, 1975 Teledyne Titan, 1976 Ritchey road bike, 1977 DiNucci built Merz track bike, 1977 (?) Exxon Graftek, many more!
Liked 1,487 Times
in
183 Posts
Likes For Portlandjim:
02-27-24, 02:11 PM
#8
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,809
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Liked 2,741 Times
in
1,155 Posts
For which we are pleased and grateful. I also hope you had less, shall we say, drama in your frame building (and other) endeavors than Mario had.
BTW, I don't know whether to thank you or curse you for posting the build sheets. They good thing is that they are endlessly fascinating (he says enjoying looking at yet another sheet to see how a purchaser wanted his/her frame built and imagining what they planned to use them for). The bad thing is that they are endlessly fascinating (he says looking over at the pile of work he is supposed to be doing).
BTW, I don't know whether to thank you or curse you for posting the build sheets. They good thing is that they are endlessly fascinating (he says enjoying looking at yet another sheet to see how a purchaser wanted his/her frame built and imagining what they planned to use them for). The bad thing is that they are endlessly fascinating (he says looking over at the pile of work he is supposed to be doing).
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
02-27-24, 03:03 PM
#9
Senior Member
For which we are pleased and grateful. I also hope you had less, shall we say, drama in your frame building (and other) endeavors than Mario had.
BTW, I don't know whether to thank you or curse you for posting the build sheets. They good thing is that they are endlessly fascinating (he says enjoying looking at yet another sheet to see how a purchaser wanted his/her frame built and imagining what they planned to use them for). The bad thing is that they are endlessly fascinating (he says looking over at the pile of work he is supposed to be doing).
BTW, I don't know whether to thank you or curse you for posting the build sheets. They good thing is that they are endlessly fascinating (he says enjoying looking at yet another sheet to see how a purchaser wanted his/her frame built and imagining what they planned to use them for). The bad thing is that they are endlessly fascinating (he says looking over at the pile of work he is supposed to be doing).
