Aero steel frame : didn't know that existed. Any idea what is this one?
#1
Full Member
Thread Starter
Join Date: Oct 2018
Posts: 378
Bikes: 1994 Cadex CFR3, 2006 Scott CR1 SL, Rossin aero, Bertrand GB 2000, Spec Allez Pro
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 134 Post(s)
Liked 68 Times
in
52 Posts
Aero steel frame : didn't know that existed. Any idea what is this one?
Just picked up a very cool steel bike that seems to be designed to be fully aerodynamic. The tubes are oval, it's a full Shimano 600AX group, including the seat post. Anybody has more info on this type of bike? Why they never really became common (same thing for the 600AX), etc.
And if anybody can guess the model of this one or at least the tubing, it would make my day!
And if anybody can guess the model of this one or at least the tubing, it would make my day!
Likes For jonny7:
#2
Strong Walker
Ovalized steel tubing sets existed, Columbus Max for example (as did aero steel bikes in general, see https://www.bikeforums.net/classic-vintage/1183324-picture-your-favorite-vintage-time-trial-bicycles-why.html)
the seat tube of yours doesn't look as if that was a feature of a tubeset. I guess the frame builder aero'ed it some more in his bench vise
the seat tube of yours doesn't look as if that was a feature of a tubeset. I guess the frame builder aero'ed it some more in his bench vise
Last edited by martl; 06-14-20 at 01:17 PM.
Likes For martl:
#3
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4560 Post(s)
Liked 2,802 Times
in
1,800 Posts
Univega also made some bikes in the early 1990s with ovalized steel tubing -- Bi-Axial Power Oval. My Via Carisma has variable ovalized top and down tubes. Not sure what the advantage was supposed to be. Looks cool.
#4
Senior Member
Join Date: Aug 2015
Location: Murrieta Ca.
Posts: 537
Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 623 Times
in
245 Posts
Very nice score!!!
: Mike
: Mike
__________________
Booyah Hubba-Hubba!!!
Booyah Hubba-Hubba!!!
Likes For Nemosengineer:
#5
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,062 Times
in
787 Posts
that serial number will be the best clue, especially for someone lke T-Mar but this frame was not built with one of the "aero tubing sets" such as made by Tange and used by SR Litage and Tsunoda in early '80s. Koga-Miyata had one too so they may have drawn their own "aero" tubesets.
Besides Shogun, already mentioned, and San Rensho (no chance this one's even is in the same universe) there's one I don't know about except the name: "Jupiter King" which has SOME similarities to the OP's, like the lugs and just flattened seat tube
Besides Shogun, already mentioned, and San Rensho (no chance this one's even is in the same universe) there's one I don't know about except the name: "Jupiter King" which has SOME similarities to the OP's, like the lugs and just flattened seat tube
Last edited by unworthy1; 06-14-20 at 01:51 PM.
#6
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,906
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4806 Post(s)
Liked 3,929 Times
in
2,554 Posts
Couldn't any framebuilder make his own blocks and ovalize tubing? (Not saying it would ever pan out $$-wise.) Like framebuilders do to ends to make DTs stiffer at the BB and the headtube weld deeper and stronger.
Ben
Ben
#7
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,447
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4236 Post(s)
Liked 2,949 Times
in
1,808 Posts
I've heard its awful hard to source replacements for those aero shifters (also hard to convert them into cable stops), so don't lose those. Based on their presence, I'd estimate it's older than the Univega described above, but I could be very wrong.
#8
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Looks like an Asian serial number, maybe Merida or Miki.
#9
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
The subject bicycle was manufactured by Miki of Japan during 1982. There were two basic approaches to the early aero frames of 1981-1985. First was full aero, with seat and tubes that were aero profile along the full length and sometimes with an aerodynamic faring added to the head tube. While this provided optimum aerodynamic efficiency, you either had to fillet braze the frame or use expensive, dedicated lugs. Furthermore, there ere some fitting issues. You had to use a dedicated seat post and use a front derailleur hanger. The more economical approach was to use seat and/or down tubes that had been formed into aero profile only in the mid-sections, allowing the use of standard lugs, seat posts and clamp style front derailleurs, at the expense of some aerodynamic efficiency. My preferred terminology for this latter style is quasi-aero.
Aerodynamic tubesets of the era included Tange Aero, Columbus Air and Reynolds 531 Speed Stream. However, any manufacture could also easily produce quasi-aero tubes from round tubes.
Shimano's aerodyanmic AX groups were cutting edge in the day. They incorporated several innovations, beyond those to aid aerodynamics. The cycling market was quite conservative at the time and the consensus is that the AX groups were just a little too radical for market at the time. The AX groups were offered as an alternative for those who wished such a group. Shimano continued to offer their more traditional EX groups concurrently with AX. Ironically, Campagnolo jumped on the aero bandwagon just as Shimano discontinued their AX groups. AX did however, leave it's mark, with the component market trending away from flutes and embossing, in favour of a cleaner, smoother surfaces with silk-screened lettering. Aero seat posts, stems, brake levers and rims also gained in popularity after the demise of AX. From this perspective, AX can be considered to be ahead of its time.
Aerodynamic tubesets of the era included Tange Aero, Columbus Air and Reynolds 531 Speed Stream. However, any manufacture could also easily produce quasi-aero tubes from round tubes.
Shimano's aerodyanmic AX groups were cutting edge in the day. They incorporated several innovations, beyond those to aid aerodynamics. The cycling market was quite conservative at the time and the consensus is that the AX groups were just a little too radical for market at the time. The AX groups were offered as an alternative for those who wished such a group. Shimano continued to offer their more traditional EX groups concurrently with AX. Ironically, Campagnolo jumped on the aero bandwagon just as Shimano discontinued their AX groups. AX did however, leave it's mark, with the component market trending away from flutes and embossing, in favour of a cleaner, smoother surfaces with silk-screened lettering. Aero seat posts, stems, brake levers and rims also gained in popularity after the demise of AX. From this perspective, AX can be considered to be ahead of its time.
Last edited by T-Mar; 06-14-20 at 02:10 PM.
Likes For T-Mar:
#11
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,601 Times
in
1,764 Posts
Thanks for posting this bike. What I've been told is that Shimano rounded up a few manufacturers in the early eighties to build frames to their specifications so there would be frames available to put their new AX groups on. Araya was one, and apparently Miki was another.
I am guessing this paint job is a repaint and that originally it was silver with the period blue-green Shimano colors.
Like this:
I am guessing this paint job is a repaint and that originally it was silver with the period blue-green Shimano colors.
Like this:
Likes For non-fixie:
#12
Senior Member
Not relevant to identification of the bike, but aero-shaped steel tubing is readily available. Nova shaped tubes link.
#13
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Thanks for posting this bike. What I've been told is that Shimano rounded up a few manufacturers in the early eighties to build frames to their specifications so there would be frames available to put their new AX groups on. Araya was one, and apparently Miki was another.
I am guessing this paint job is a repaint and that originally it was silver with the period blue-green Shimano colors.
Like this:
I am guessing this paint job is a repaint and that originally it was silver with the period blue-green Shimano colors.
Like this:
Your Janssen reminds me a lot of another MIki manufactured frame that turned up under the Faglum brand owned by the Swedish Petterson family of team time trial fame. It was unique in that the down tube was aero at the top and middle but but round at the BB end. The seat tube was also round allowing a standard, clamp style front derailleur and semi-aero seat post. The top tube was oval. I speculated that the round BB end of the down tube allowed for a standard BB shell and provided more lareal stiffness. Aerodynamics of the BB and seat tube are upset by the turbulence from spinning cranks and legs, so its not as important in the BB and seat tube region. An oval top tube with the major axis oriented laterally would offset some of the lateral stiffness lost by the (mostly) aero section down tube. It struck me as a unique compromise of aerodynamics, stiffness and cost effectiveness.
Likes For T-Mar:
#14
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Nishiki had a similar but orange to yellow fade on one of their Altron models. The OP's frame is almost certainly a repaint as it predates the rise of fade paint schemes. As previously noted, silver was the most popular colour for the Japanese aero bicycles, as it was the colour used by Shimano for the aero bicycles featured in their catalogues and their display models used at bicycle shows. The silver provided a good background for the sky blue, royal blue and green of Shimano's corporate colours, which represented sky, sea and land.
Likes For T-Mar:
#15
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26422 Post(s)
Liked 10,380 Times
in
7,208 Posts
.
...I've seen a Benotto 5000, with aero steel frame tubing, put out for the triathlon market, I think. Not sure where the frame was made, and it's an unimpressive bicycle. And let us never forget the Huffy Aerowind.
...I've seen a Benotto 5000, with aero steel frame tubing, put out for the triathlon market, I think. Not sure where the frame was made, and it's an unimpressive bicycle. And let us never forget the Huffy Aerowind.
Likes For 3alarmer:
#18
Senior Member
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,469
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,899 Times
in
931 Posts
This is my McBain 'Record' track bike (aka fixie) built in Tasmania, Australia, with (what I think are) Tange Aero tubes. The AX seat post is 'clamped' with a grub screw and has enough space around it to open a cafe.
This is a really old photo, I need to get an updated shot as it now sports harlequin bar tape and sensible gearing.
This is a really old photo, I need to get an updated shot as it now sports harlequin bar tape and sensible gearing.
#19
Senior Member
Join Date: Jul 2017
Location: Queens, NY for now...
Posts: 1,515
Bikes: 82 Lotus Unique, 86 Lotus Legend, 88 Basso Loto, 88 Basso PR, 89 Basso PR, 96 Bianchi CDI, 2013 Deda Aegis, 2019 Basso Diamante SV
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 943 Post(s)
Liked 172 Times
in
113 Posts
The Lotus Super Pro Aero was very aero, as you can see here: Super Pro Aero
And then they had the diet version in the Aero Sport : Lotus Aero Sport
There was a Super Pro Aero for sale recently, I think on local NYC CL (but maybe it was Ebay). About $1,000 and it was in nice shape.
And then they had the diet version in the Aero Sport : Lotus Aero Sport
There was a Super Pro Aero for sale recently, I think on local NYC CL (but maybe it was Ebay). About $1,000 and it was in nice shape.
#20
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
Sure. But before Columbus, Tange, Reynolds, etc. came out with their full aerodynamic tube sets (not just ovalized in the middle like the OP's frame), builders would source teardrop strut tubing from aircraft suppliers, e.g. Aircraft Spruce and fillet braze or TIG weld the frame. This would get you straight gauge main tubes, anyway. Columbus "Air," Tange "Aerodynamics," Reynolds 531 "Speedstream" eventually provided butted tubes and aero-profile stays and fork blades, and proprietary lugs, fork crowns, and bottom bracket shells to match to allow lugged aerodynamic frames.
#21
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
D'oh! I just noticed that you're from Quebec! Your bicycle is almost certainly a Velosport, a Canadian brand out of St, Georges-de-Beauce, Quebec by the company later known as Procycle. I've seen other higher end Velosport models from this era with Miki format serial numbers. Velosport had a Shimano 600AX model with a quasi-aero frame called the Super Aero, which is a good match for your bicycle. The OEM colour was called "Metallic Grey" but I recall there being a slight blue tint to it. I had one of their Mirage models with Dura-Ace AX, back in 1983 and the attached Super Aero scan is from that year.
Ironically, the Tour de Beauce stage race would have been held this week, if not for the pandemic.
Ironically, the Tour de Beauce stage race would have been held this week, if not for the pandemic.
#22
Full Member
Thread Starter
Join Date: Oct 2018
Posts: 378
Bikes: 1994 Cadex CFR3, 2006 Scott CR1 SL, Rossin aero, Bertrand GB 2000, Spec Allez Pro
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 134 Post(s)
Liked 68 Times
in
52 Posts
Woah! Even the saddle seems to be a fit. But I wish the PO kept the original color scheme! Funny how I thought Vélo Sport made mostly low end bikes.
Do you actually have the 1983 Velo Sport catalogue? Does it say more about the bike (e.g. its place in the line up) and about the components?
Do you actually have the 1983 Velo Sport catalogue? Does it say more about the bike (e.g. its place in the line up) and about the components?
#23
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
Woah! Even the saddle seems to be a fit. But I wish the PO kept the original color scheme! Funny how I thought Vélo Sport made mostly low end bikes.
Do you actually have the 1983 Velo Sport catalogue? Does it say more about the bike (e.g. its place in the line up) and about the components?
Do you actually have the 1983 Velo Sport catalogue? Does it say more about the bike (e.g. its place in the line up) and about the components?
Components were consistent across all the three years. The only mentioned components which are not 600AX were the SR Custom handlebar, Kashimax Aero saddle, Araya Aero rims and Sedisport chain. It appears to have the full 600AX group consisting of stem, headset, brakeset, hubset, crankset, pedals, derailleurs, shift levers, seat post and even the water bottle, though the stem, headset and seat post are not mentioned in the specifications.
Likes For T-Mar:
#24
Senior Member
Join Date: Feb 2011
Location: adelaide, australia
Posts: 2,798
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 227 Post(s)
Liked 390 Times
in
149 Posts
I've had a few opportunities to get locally made Standish aero bikes but they weren't my size
There was also Gemini locally. Panasonic had them, Koga Myata, Shogun.
Shogun
There was also Gemini locally. Panasonic had them, Koga Myata, Shogun.
Shogun
#25
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Back around 1985 I was able to buy a salmon colour aero tubed Velo Sport Dura Ace AX bike from Bloor Cycle in Toronto Canada. I'm really sorry I sold that bike.
One thing about 600 AX and Dura Ace AX derailleurs is that neither the front or the rear used external cable housing. Also, the braze-on models of the 600 AX and Dura Ace AX used a special mount that incorporated the cable guid on it's rear. They came in two types, one for a round tube and one for the aero tube.
Cheers
Edit. I've heard that the AX series died out because Shimano perfected and introduced S.I.S.* and the AX stuff couldn't be adapted to index shifting.
*S.I.S. = Shimano Index Shifting
One thing about 600 AX and Dura Ace AX derailleurs is that neither the front or the rear used external cable housing. Also, the braze-on models of the 600 AX and Dura Ace AX used a special mount that incorporated the cable guid on it's rear. They came in two types, one for a round tube and one for the aero tube.
Cheers
Edit. I've heard that the AX series died out because Shimano perfected and introduced S.I.S.* and the AX stuff couldn't be adapted to index shifting.
*S.I.S. = Shimano Index Shifting
Last edited by Miele Man; 06-16-20 at 12:33 AM. Reason: Added comment