Would you trust these hubs?
#1
Senior Member
Thread Starter
Would you trust these hubs?
I like the look, but I'm wary. Seller is in Taiwan. Who knows who manufactured them. Should I give it a shot? Or am I looking at high medical bills?
https://www.ebay.com/itm/31431454394...cAAOSwDSxhNdDT
https://www.ebay.com/itm/31431454394...cAAOSwDSxhNdDT
#2
Catching Smallmouth
Join Date: Oct 2013
Location: In a boat
Posts: 590
Bikes: 1990 Specialized Sirrus Triple, 1985 Trek 460, 2005 Lemond Tourmalet, 1984 Schwinn LeTour 'Luxe, 1988 Trek 400T, 1985 Trek 450, 1997 Lemond Zurich, 1993 Diamond Back Apex, 1988 Schwinn Circuit, 1988 Schwinn Prologue, 1978 Trek TX700, Sannino
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 88 Post(s)
Liked 134 Times
in
79 Posts
Yes, and off the top of my head, looks like Bitex. If you like the high flange look I think Velo Orange and Handsome Cycles have similar hubs. I've got a set of wheels I built with the Handsome Cycles hubs. They are nice, but I don't know if they do Campagnolo freehubs.
#3
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
Makes a huge difference whether or not that you know that the hubs were actually made by a reputable maker such as Bitex.
But in general, buying bike parts from vendors with little in the way of state-side assets is risky, as without liability concerns their design, testing and QA standards might be very, very low.
As a lightweight rider who does lower mileage on any one particular set of wheels, and who doesn't tension the spokes very highly, I would have much less to worry about than other potential users. That, and (according to the IRS) I've only got 25 years left to live anyway.
But in general, buying bike parts from vendors with little in the way of state-side assets is risky, as without liability concerns their design, testing and QA standards might be very, very low.
As a lightweight rider who does lower mileage on any one particular set of wheels, and who doesn't tension the spokes very highly, I would have much less to worry about than other potential users. That, and (according to the IRS) I've only got 25 years left to live anyway.
#4
Senior Member
Thread Starter
Well, I found out who manufactures them. It doesn't make me feel any better or worse.
https://www.lllco.url.tw/index.html
https://www.lllco.url.tw/index.html
#5
Senior Member
Join Date: Nov 2015
Posts: 4,489
Mentioned: 102 Post(s)
Tagged: 0 Thread(s)
Quoted: 1641 Post(s)
Likes: 0
Liked 831 Times
in
540 Posts
Question really is, was it engineered??........Or just made from a quick McDonalds napkin sketch by Joe Blow......
__________________
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
72 Line Seeker
83 Davidson Signature
84 Peugeot PSV
84 Peugeot PY10FC
84 Gitane Tour de France.
85 Vitus Plus Carbone 7
86 ALAN Record Carbonio
86 Medici Aerodynamic (Project)
88 Pinarello Montello
89 Bottecchia Professional Chorus SL
95 Trek 5500 OCLV (Project)
#6
Full Member
Join Date: Jan 2023
Posts: 486
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Likes: 0
Liked 452 Times
in
232 Posts
Window shopping.
$300 shipped / 337gm (3/4 lbs), 32 hole (though description denotes 36h), chamfered both sides of drillings, 120 / 100mm width. Proven product? Bearing quality?
Not me.
Look at White Industries polished hubset.
$300 shipped / 337gm (3/4 lbs), 32 hole (though description denotes 36h), chamfered both sides of drillings, 120 / 100mm width. Proven product? Bearing quality?
Not me.
Look at White Industries polished hubset.
#7
All Campy All The Time
Join Date: Nov 2013
Location: Richmond, Virginia
Posts: 1,417
Bikes: Listed in my signature.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 177 Post(s)
Liked 114 Times
in
63 Posts
Would I trust them? Nope. Too much air, not enough aluminum.
__________________
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
My C&V Bikes:
1972 Bottecchia Professional, 1972 Legnano Olympiade Record,
1982 Colnago Super, 1987 Bottecchia Team C-Record,
1988 Pinarello Montello, 1990 Masi Nuova Strada Super Record,
1995 Bianchi Campione d'Italia, 1995 DeBernardi Thron
#8
Senior Member
Join Date: Aug 2015
Location: Murrieta Ca.
Posts: 537
Bikes: Teledyne Titan, Bob Jackson Audax Club, Bob Jackson World Tour, AlAn Record Ergal, 3Rensho Katana.
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 215 Post(s)
Liked 623 Times
in
245 Posts
I own a set of the large flange LL-62 hubs. Machine work is pretty good, easy to disassemble, a nice clear anodized finish a very simple hub and supported by the manufacture as I have ordered service parts and a spare freehub, no issues and quick shipping. I consider these a "fashion" item as the bling factor is high. I would call these serviceable, probably wont last forever but then again what does.
So I would consider these LLL hubs cheap and cheerful
I also own a set of Curtis Odem hubs of the same drilling pattern so no comparison as far as workmanship but Curtis isn't building at the moment and his prices were eyewatering at the time I bought mine, that makes LLL the only game in town for this style hub.
This set is going on a '83 Colnago Super.
Untitled by nemosengineer, on Flickr
: Mike
So I would consider these LLL hubs cheap and cheerful
I also own a set of Curtis Odem hubs of the same drilling pattern so no comparison as far as workmanship but Curtis isn't building at the moment and his prices were eyewatering at the time I bought mine, that makes LLL the only game in town for this style hub.
This set is going on a '83 Colnago Super.
Untitled by nemosengineer, on Flickr
: Mike
__________________
Booyah Hubba-Hubba!!!
Booyah Hubba-Hubba!!!
Likes For Nemosengineer:
#9
Senior Member
Thread Starter
Nemosengineer , Thanks a lot. I just decided against them and now you put me on the fence again. I'm a light rider, but I ride a lot. The ones you have definitely have less material than the ones I'm considering.
Likes For gearbasher:
#10
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,055 Times
in
1,255 Posts
Likes For clubman:
#11
Senior Member
I would. It costs too much to make a ****** version like that so the company may as well aim higher in order to make a better profit. Keep in mind that a lot of the products we pay too much for are made in these same factories that then stamp the names of the US company that bought a bunch from them.
One thing I never cared about some of the Velo Orange branding is that it was cheap laser engraving of off the shelf products like these. I like velo orange but if I'm going to pay their premium they should at the very least brand them better.
One thing I never cared about some of the Velo Orange branding is that it was cheap laser engraving of off the shelf products like these. I like velo orange but if I'm going to pay their premium they should at the very least brand them better.