Schwinn Super Le Tour equipped with early Dura Ace
#1
Full Member
Thread Starter
Join Date: Oct 2020
Location: Portland, Oregon
Posts: 242
Bikes: Bakers dozen is the limit!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 88 Post(s)
Liked 449 Times
in
142 Posts
Schwinn Super Le Tour equipped with early Dura Ace
Interesting find. Schwinn Super Le Tour 12.2, Japanese frame, serial # potentially indicates 1976 build. Yet, equipped with 1977 Schwinn Volare components, early Dura Ace group (Crane rear derailleur). Yep, that's an Ideale 90 saddle.
Likes For VRJAKE:
#2
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,896
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1459 Post(s)
Liked 2,206 Times
in
967 Posts
Very snazzy! Possibly loose the rack and fender and add a set of tubular wheels.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#3
Senior Member
Tan side wall tires and a pair of more period correct pedals would have it looking a lot better. Rene Herse has some very nice light weight folding tires in 700C. Would definitely search out either a tubular or 700C clincher wheel set. The bike certainly deserves it and would ride all the better. Heck, I spent 800.00 in upgrading parts on a 200.00 Norco touring, still worth it and need to shell out another 3 -400.00 to get the bike where I want it.
Likes For VintageRide:
#4
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,746
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2157 Post(s)
Liked 3,441 Times
in
1,214 Posts
Keep the rack. Match the fender or find a pair.
Pretty sweet find.
Pretty sweet find.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#5
Full Member
Thread Starter
Join Date: Oct 2020
Location: Portland, Oregon
Posts: 242
Bikes: Bakers dozen is the limit!
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 88 Post(s)
Liked 449 Times
in
142 Posts
Should mention that rims are 700c, Araya alloy, another spec from the Volare compared to the Super LT (looking at old Schwinn catalogues from 1976-78 on-line). Researching Super Le Tour's, this was a transitional time for Schwinn with some of these frames made in Chicago and some made in Japan, perhaps from multiple manufacturers like Miyata, Bridgestone.
#6
Senior Member
Join Date: Dec 2005
Posts: 17,177
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3817 Post(s)
Liked 6,742 Times
in
2,625 Posts
Seems like a good reason to hunt for a Volare F/F.
Likes For nlerner:
Likes For VRJAKE:
#8
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,503
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 584 Post(s)
Liked 704 Times
in
397 Posts
#9
Senior Member
If you keep the rack, be sure to place something between the bottom of the clamp and the top of the brake bridge. It can be a simple as a block of aluminum or a stiff, strong strap - just something that can go into compression without buckling.
This will prevent the rack from sliding down the stays destroying the paint. It will also prevent any desire to crank down on the clamping bolts, thereby damaging/denting the stays.
This will prevent the rack from sliding down the stays destroying the paint. It will also prevent any desire to crank down on the clamping bolts, thereby damaging/denting the stays.
#10
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,813
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1397 Post(s)
Liked 1,336 Times
in
842 Posts
I don't know about you, but I have yet to find modern folding tires that fit decently onto old school rims. (I started an earlier thread about the trials and tribulations of replacing tires.)
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#11
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,931
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2478 Post(s)
Liked 3,214 Times
in
2,024 Posts
AMCO likely built it up...!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
#12
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,280
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1301 Post(s)
Liked 942 Times
in
490 Posts
4130 cromo? That's interesting, because the later (early '80's) Super LeTours were 1020 hi-ten. Maybe "12.2" is a step up.
__________________
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
#14
Senior Member
Join Date: Jul 2020
Location: Humboldt County, CA
Posts: 835
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Likes: 0
Liked 431 Times
in
287 Posts
Cro-mo main tubes. 1020 stays and fork.
My '77 was a great riding bike. Got it as a frame + a few OG parts. First built as fixed gear, with 700C wheels (my 1st wheel build. Alex rims, Sansin hubs). 32s fit with plenty of room. The original Dia-Compe 610 centerpulls reached with room to spare. Wald North Road bars, Dia-Compe SS-5 MTB levers. Ended up as a 1x6 with the inner ring paired with a 14-26 Suntour freewheel, using the Shimano fleur-de-lis shifters and a Suntour BL-GT. (Because it was a Suntour, and it was blue, and I had it.)
Mine was blue. Fantastic looking bike. Great ride, though a bit heavy. The worst thing about it was the 7/8" stem... the one the bike came with was too short, and long Schwinn stems aren't a thing. Wish I still had it.
--Shannon
My '77 was a great riding bike. Got it as a frame + a few OG parts. First built as fixed gear, with 700C wheels (my 1st wheel build. Alex rims, Sansin hubs). 32s fit with plenty of room. The original Dia-Compe 610 centerpulls reached with room to spare. Wald North Road bars, Dia-Compe SS-5 MTB levers. Ended up as a 1x6 with the inner ring paired with a 14-26 Suntour freewheel, using the Shimano fleur-de-lis shifters and a Suntour BL-GT. (Because it was a Suntour, and it was blue, and I had it.)
Mine was blue. Fantastic looking bike. Great ride, though a bit heavy. The worst thing about it was the 7/8" stem... the one the bike came with was too short, and long Schwinn stems aren't a thing. Wish I still had it.
--Shannon
Likes For ShannonM:
#15
Senior Member
Join Date: Nov 2008
Location: New York Metro Area
Posts: 3,864
Bikes: '02 Litespeed, '99 Bianchi Alfana. '91 Fuji Saratoga, '84 Peugeot Canyon Express, '82 Moto GR, '81 Fuji America, '81 Fuji Royale; '78 Bridgestone Diamond Touring, '76 Fuji America, plus many more!
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 181 Post(s)
Liked 225 Times
in
128 Posts
Somebody knew what they were doing, but I would have installed a set of bar-end shifters on it!
#16
Senior Member
Join Date: Feb 2012
Location: Williamsburg, VA Sebastian, FL
Posts: 1,363
Bikes: 1987 Centurion Ironman Master, 1992 Koga Miyata Exerciser, 1992 Schwinn Crosscut
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 209 Post(s)
Likes: 0
Liked 175 Times
in
92 Posts
Very nice bike.
The mismatched cable housings, though, would drive me crazy!
The mismatched cable housings, though, would drive me crazy!
#17
Senior Member
Join Date: Jun 2019
Location: Michigan USA
Posts: 898
Bikes: A bunch of old bikes.
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 284 Post(s)
Liked 885 Times
in
425 Posts
#18
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,280
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1301 Post(s)
Liked 942 Times
in
490 Posts
My friend had an '81. The bike gained 8 ounces when it went from butted chromo to 1020 hi-ten. This helped to keep the price down, which I appreciate. Schwinn got it right when they started putting out aluminum frames.
__________________
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"
"In every job that must be done, there is an element of fun. You find the fun, and - SNAP - the job's a game!"