Is this foldie a viable credit-card touring platform?
Likes For Ron Damon:
#2
Is that chainring really that big or are you just happy to see me? (ref Mae West)
What's your highest gear? Because with light CC touring, you can go fast.
With those size wheels, and large cog, looks like you have plenty of low, though the chain and RD may be darned close to the tire, but I'm sure is already checked out ok.
Most any bike could be good for CC touring, but if hopping any buses or trains, a folder is better.
What's your highest gear? Because with light CC touring, you can go fast.
With those size wheels, and large cog, looks like you have plenty of low, though the chain and RD may be darned close to the tire, but I'm sure is already checked out ok.
Most any bike could be good for CC touring, but if hopping any buses or trains, a folder is better.
Likes For Duragrouch:
#3
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Is that chainring really that big or are you just happy to see me? (ref Mae West)
What's your highest gear? Because with light CC touring, you can go fast.
With those size wheels, and large cog, looks like you have plenty of low, though the chain and RD may be darned close to the tire, but I'm sure is already checked out ok.
Most any bike could be good for CC touring, but if hopping any buses or trains, a folder is better.
What's your highest gear? Because with light CC touring, you can go fast.
With those size wheels, and large cog, looks like you have plenty of low, though the chain and RD may be darned close to the tire, but I'm sure is already checked out ok.
Most any bike could be good for CC touring, but if hopping any buses or trains, a folder is better.
#4
The drivetrain is 53 x 11-37 with 50-305 wheels, Grouch. Fast is not my concern. As said before, despite the profusion of Greg LeMonds and Alberto Contadors on this channel, chasing speed on a 305 -451 size wheel is a fool's errand. I am more concerned about climbing to 3,000masl.
#5
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Yeah that's enough gearing. I also don't need racer speed, just want to be able to pedal down mild grades, so 85 inch is enough, but I could probably get by with a bit lower. I think it's you saying credit card touring which made me think speed, I always pictured if I did that it would be on my old road race bike, light and fast. But if I go touring, it'll be on my 20", heavy, self-contained touring. Maybe if lodging and meals were low cost, I'd go light touring, especially if tropical, I'd rather not camp outside at night. A friend of mine, nearly every year goes to some southeast Asia country in January for a month-long tour (he's not a biker), totally lodging and bought meals. Last year was Thailand, this year was Vietnam. The food looked awesome, and not expensive.
#6
Full Member
Nice looking bike! I'm pretty sure you could squeeze a tour or two out of it as long as your credit card has the credit. If it were me I would want a larger seat bag or a rear rack. When I did a credit card bike tour of Bali back in the 1980s I just strapped my carry-on bag to my rear rack. Not the ideal solution, but it worked for me.
Last edited by Pine Cone; 03-26-24 at 09:48 PM.
#7
Cantilever believer
With how close the rear derailleur tension pulley is to the roadway surface, wondering if a teeny tire might fit on it...
Hopefully it'll work well for you. I invested in a Bike Friday over two decades ago with no regrets.
Hopefully it'll work well for you. I invested in a Bike Friday over two decades ago with no regrets.
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
Likes For RCMoeur:
#8
On a thread a couple months ago, Brompnots, seeing the price of those in SE Asia and without the expensive shipping to the USA, if I were light touring, I'd seriously consider pre-arranging to buy one there, use, then bring back home. With limited time, and perhaps hazardous roads with truck traffic, I probably wouldn't bike long transits, I'd probably use public transport, using the folder to bike around each city.
Likes For Duragrouch:
#9
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
I've got other bikes with larger wheels, and I've toured cross country on a similar 16" bike. I can afford a stable of Bike Fridays if I wanted, but they do not appeal to me. They are simply not good value and they don't fold well either.
Last edited by Ron Damon; 03-26-24 at 10:43 PM.
#10
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Nice looking bike! I'm pretty sure you could squeeze a tour or two out of it as long as your credit card has the credit. If it were me I would want a larger seat bag or a rear rack. When I did a credit card bike tour of Bali back in the 1980s I just strapped my carry-on bag to my rear rack. Not the ideal solution, but it worked for me.
https://earth.google.com/web/data=Mk...NzFFNjFFNzIgAQ
Likes For Ron Damon:
#11
My Dahon Speed set up like a BF NWT, was a small fraction of the BF price. But with Dahon's prices doubling and still needing the upgrades, and BF's not increasing nearly as much, the cost now is a lot closer to BF, for lower quality and needed investment of parts and labor, versus a BF arriving turn-key and ready to tour. Also, Bike Friday's customer service is famously good, from everything I've read online about service after the sale, and modifications like going from rim brakes to discs, they work with people. And that has value. However, like you, I consider the BF fold to be messy, though more compact than my bifold for air travel. But for non-air folding situations, the bifold is a lot cleaner and quicker fold, and don't need to remove any racks, handlebars, seatpost, etc.
#12
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
My Dahon Speed set up like a BF NWT, was a small fraction of the BF price. But with Dahon's prices doubling and still needing the upgrades, and BF's not increasing nearly as much, the cost now is a lot closer to BF, for lower quality and needed investment of parts and labor, versus a BF arriving turn-key and ready to tour. Also, Bike Friday's customer service is famously good, from everything I've read online about service after the sale, and modifications like going from rim brakes to discs, they work with people. And that has value. However, like you, I consider the BF fold to be messy, though more compact than my bifold for air travel. But for non-air folding situations, the bifold is a lot cleaner and quicker fold, and don't need to remove any racks, handlebars, seatpost, etc.
Last edited by Ron Damon; 03-26-24 at 11:35 PM.
#13
Nope. BF (and most Dahons) is too expensive for me to consider its bikes seriously. It's not a problem of affordability, but rather of value. Sorry, I ain't a First-World-bubble spendthrift. Customer service? 😂 Do I sound to you like someone who wants to pay for being spoonfed, babied, held by the hand and advised on my world tour bike by some geezer in Oregon who probably doesn't even have a passport? 😂😂 GMAFB.
Customer service: I also do my own service, and carry a lot of weight in tools, even local; I don't mean on the road fixing advice, although probably that too. I mean if the frame cracks, the fork cracks, etc, or even one of the components they don't make fails, they back up their stuff, and honor the component warranty themself, they don't blow you off and tell you to contact Shimano or SRAM. On frame and fork, 10 year warranty, and from what I've read online, they don't blow you off or make you jump through hoops. No long phone holds or being handed off to other departments 3 or 4 times, which happens with other things like problems with my health insurance billing, with a call center in central america or the phillipines, based on the time of day. They're a small shop, you get service right away, customer service is seconds away from where they build the bikes. They know people do serious traveling with their bikes and heavy touring, and they try not to let people down. That's rare these days. And if other parts of the trip were costing a whole bunch of money, I'd want a reliable bike and good maker support, that may be the much smaller cost versus a ruined trip. Also, their frames are custom-size on request at no additional charge. I think there's a reason BF has survived despite many more folders on the market now. I'm not a shill for BF and do recognize some shortcomings in the design, but not the company itself, from what I can see.
Last edited by Duragrouch; 03-27-24 at 12:10 AM.
#14
Junior Member
Ron, questions for you. You own both 16 and 20 inch wheeled bikes. I've read several times among these posts that 16 inch folders are only good for a few miles, more of a destination hookup than just pleasure riding. I want your opinion on this as you seem to have the most experience on these forums with the 16 inch wheel. My daily greenway jaunt is usually 8 to 12 miles. Is this too much for a 16 inch folder to ride comfortably? Thanks your opinion is valued.
#15
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Ron, questions for you. You own both 16 and 20 inch wheeled bikes. I've read several times among these posts that 16 inch folders are only good for a few miles, more of a destination hookup than just pleasure riding. I want your opinion on this as you seem to have the most experience on these forums with the 16 inch wheel. My daily greenway jaunt is usually 8 to 12 miles. Is this too much for a 16 inch folder to ride comfortably? Thanks your opinion is valued.
Comfort, well, again, save for their smaller dimension which makes fitting taller people more difficult, there is no fundamental reason why a 16" bike should be less comfy at the contact points. They take the same saddles, pedals and grips as larger bikes, and you can dial in the riding position to a good degree. Road chatter and bumps, of course, will be more noticeable, so you gotta ride in good or better roads. We don't have the best roads here, but I ride most of them with a 16" bike. After a while, it becomes instinct. The short-wheelbase on some models is a double-edged sword. The upside is that they are highly maneuverable, nimble and a blast to ride. The downside is that you can get into trouble if you don't know what you're doing and you can't take your mind off the steering. No hands, forget it. Having said all of that, yes, a 20" bike will be more comfy and smooth, but the question is not whether A is greater than B, but rather whether B is good enough. Only you can answer that. As for me, I always find myself reaching for the Gust 16" cuz it's just so fun to ride and its quirky X-factor, despite the disadvantages I've mentioned.
#16
(above) Well said, Ron. But you may also want to mention 16" 349 vs 305, you've mentioned a couple times the increased cushion for 305s when using fat tires at about the same outside diameter. EDIT: I do see now you mention 305. I think most 16s are 349, so you might want to mention specifics, like the tires you run on 305.
#17
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
(above) Well said, Ron. But you may also want to mention 16" 349 vs 305, you've mentioned a couple times the increased cushion for 305s when using fat tires at about the same outside diameter. EDIT: I do see now you mention 305. I think most 16s are 349, so you might want to mention specifics, like the tires you run on 305.
- Wider tire selection
- Wider range of tire size
- Ability to run tires larger at lower pressure, affording greater comfort, traction and potentially decreased susceptibility to punctures.
- Uniqueness, as everyone and their dogwalker rides 349
57-305
58-305
50-305
Last edited by Ron Damon; 04-02-24 at 03:10 AM.
Likes For Ron Damon:
#18
Senior Member
Besides its wider gear range, total silence and shifting at a stop, an Alfine 11 gear hub would be a nice alternative to that huge cassette + derailleur very close to the ground
Likes For Winfried:
#19
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Perhaps. It's an interesting idea, I'll give you that. A dispassionate and thorough analysis of the pros and cons, however, would need to consider the proposed part's price, weight and efficiency. It may be that though attractive and desirable the setup may appear at first, the drawbacks cannot be justified. One reason that I dispensed with the SRAM DualDrive 3 hub several years ago was the weight. I can't imagine an Alfine 11 weighing less or even in the ballpark of that three-speed hub.
Likes For Ron Damon:
#20
My feeling is, either go all derailleur, or all internal gear. Combinations of both just give the drawbacks of both without any advantage.
#21
Senior Member
Thread Starter
Join Date: Jun 2022
Location: The Ring of Fire
Posts: 1,651
Bikes: Several, all affordably priced, none exalted cult artifacts
Liked 841 Times
in
554 Posts
Au contraire, Dura. Except for the weight, I have nothing but good things to say about the SRAM DualDrive3 three-speed hub. Huge range, too much actually. Good shifting, good efficiency.
Likes For Ron Damon:
#22
Senior Member
Pros and cons.
I became very interested about the possibility of an Alfine 11 on a Brompton, much cheaper than a Rohloff, discoved Bromptons have a narrow rear OLD (I think 110mm) but a Scottish shop was making new wider rear triangles to fit an Alfine. But then I read of some reporting slippage on the Alfine due to roller clutches (instead of ratchet pawls) and that it's designed more for city bikes and spinning, then climbing out of the saddle. I climb both ways, so would prefer ratchet pawls.
As for slippage, besides a folder being used in cities by most users (where a gear hub is nice to have since you can change gears at a stop), it'd be interesting to know the context: Were people standing on the pedals (never a good idea with a gear hub) and/or using it with a mid-drive motor (not a good idea either)?
Last edited by Winfried; 04-02-24 at 03:43 AM.
#24
Senior Member
~$400