I flipped my Stem, and liked it
#26
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,835
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,064 Times
in
535 Posts
Tim
#27
Senior Member
Thread Starter
Numbers don't lie. Mileage is up, time is down, watts are up. Nice free mod.
__________________
2023 Salsa Journeyer
2023 Rad Rover 6
1980ish Raleigh Marathon (Vintage Steel)
2006 Trek 820 (Captain Amazing) RIP
2010 Specialized Tricross (Back in Black)
2008 Specialized Roubaix RIP
"I'm built like a marine mammal. I love the cold! "-Cosmoline
"MTBing is cheap compared to any motorsport I've done. It's very expensive compared to jogging."-ColinL
Rides:2023 Salsa Journeyer
2023 Rad Rover 6
1980ish Raleigh Marathon (Vintage Steel)
2006 Trek 820 (Captain Amazing) RIP
2010 Specialized Tricross (Back in Black)
2008 Specialized Roubaix RIP
#28
Full Member
Yes
South Shore Park.
South Shore Park and near by Cupertino Park are one of my favorite early morning rides to watch the sunrise.
Likes For roadsnakes:
#29
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 6,288
Bikes: Bikey McBike Face
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 2624 Post(s)
Liked 5,754 Times
in
2,963 Posts
Every time I see this thread title it reminds me of the song title: I kissed a girl and I liked it.
Flip on!
Flip on!
__________________
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Road 🚴🏾♂️ & Mountain 🚵🏾♂️
Likes For rsbob:
#30
Senior Member
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 1,835
Bikes: 1984 Schwinn Supersport, 1988 Trek 400T, 1977 Trek TX900, 1982 Bianchi Champione del Mondo, 1978 Raleigh Supercourse, 1986 Trek 400 Elance, 1991 Waterford PDG OS Paramount, 1971 Schwinn Sports Tourer, 1985 Trek 670
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 604 Post(s)
Liked 1,064 Times
in
535 Posts
@roadsnakes Thanks for replying, I knew I’d seen that view before, from about 100yds east of your bike, sitting in a kayak.
Tim
Tim
#31
Just a person on bike
Join Date: Aug 2013
Location: Seattle, WA
Posts: 2,140
Bikes: 2015 Trek 1.1, 2021 Specialized Roubaix, 2022 Tern HSD S+
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 132 Post(s)
Liked 86 Times
in
56 Posts
You probably have flexible hip joints. My handlebar is about 2 cm lower than the saddle. If I go lower, I will have a hard time pedalling at 80-90 RPM for longer than a few minutes. :')
__________________
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
The value of your life doesn't change based on the way you travel. - Dawn Schellenberg (SDOT)
#32
Senior Member
Join Date: Jul 2020
Location: Humboldt County, CA
Posts: 835
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 409 Post(s)
Likes: 0
Liked 431 Times
in
287 Posts
Can you ride comfortably in the hooks and on the drops for a while, on a flat road? At a steady pace, like into a headwind?
If so, and you're also comfy on the tops, ramps, and hoods, (which it sounds like you are,) then your setup is correct.
If you could hack your bars off below the brake levers and you'd only notice on long, bomber descents, you might want shallower-drop bars. Or bars with some flare. Or both. All parts of the bar are there for a reason, and all should be usable.
--Shannon
If so, and you're also comfy on the tops, ramps, and hoods, (which it sounds like you are,) then your setup is correct.
If you could hack your bars off below the brake levers and you'd only notice on long, bomber descents, you might want shallower-drop bars. Or bars with some flare. Or both. All parts of the bar are there for a reason, and all should be usable.
--Shannon
#33
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,575
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3911 Post(s)
Liked 1,960 Times
in
1,398 Posts
The OP's finding is not unusual. I have a few friends who solved back issues by lowering their bars. The limit to that is when your thighs bang your belly or chest when on the hoods, forearms horizontal. Seems like skinny cyclists never encounter that, though.
__________________
Results matter
Results matter
#34
Banned
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times
in
195 Posts
On my Marin, the best MTB ever sold to the general population, the low bars are an advantage on the flat or downhill because they are more aero, and on steep climbs they are an advantage because they give more options for positioning your body for traction.
#36
Resident PIA
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 870
Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 223 Post(s)
Liked 365 Times
in
194 Posts
I flipped my stem and didn’t notice a difference.
.
.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
#37
ignominious poltroon
Join Date: Jan 2022
Posts: 4,107
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2269 Post(s)
Liked 3,487 Times
in
1,831 Posts
I assume this is a 0° stem joke, but if for some reason it is not (truth is stranger than parody on bikeforums), you have some spacers to play with.
I just moved a spacer from under the stem to on top, after 9 years. I am more comfortable with the slight increase in drop.
I just moved a spacer from under the stem to on top, after 9 years. I am more comfortable with the slight increase in drop.
#38
Senior Member
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,525
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 989 Post(s)
Liked 1,656 Times
in
1,063 Posts
We do what we have to do... TO RIDE!
Years ago when most locals were running 22mm road bike tires I was using 32mm. Considering that I also ride back roads it was a reasonable compromise. Yet today seeing 32mm tires, or even 34mm on a road bike is not unusual...
As we age often we become more BEAT UP then we look. So when we see a geezzer Bopping down the road with an oddball configuration we take a step back and say... Bravo Bicicleta...
Years ago when most locals were running 22mm road bike tires I was using 32mm. Considering that I also ride back roads it was a reasonable compromise. Yet today seeing 32mm tires, or even 34mm on a road bike is not unusual...
As we age often we become more BEAT UP then we look. So when we see a geezzer Bopping down the road with an oddball configuration we take a step back and say... Bravo Bicicleta...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)