It is finished, for now... another Twenty.
#1
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Well, this weekend I took my newly updated Raleigh Twenty out for a spin in the Joshua Tree National Park, picture attached (more pictures of the park can be found at www.robertsdvd.net/phlog).
My impressions thus far:
Powergrips: gotta go, they were free, and good thing too. I'll be getting some toe clips and straps soon.
Steering: wooo, scary at high speeds!
Cockpit: I have no idea why I decided to go back with flat bars, I think it was the whole - no one makes thumb shifters for internal gears anymore so all I had was the twist shifter, which - yes there are ways to work them on drop bars but I dunno. Anyway, the flat bars... I just don't know... my left hand always gets the brunt of the pain and numbness on flat bars, I might raise them up more. I'm also seriously pondering getting some albatrosses or dove bars and doing a more upright cafe cruiser ride out of the whole lot. Very fluid. The most comfortable bikes I've ridden have always had more upright than not, terrible lower back pains usually for me, docs always just say "uh, try calisthenics." Though, my bike back in Mass has drops and they usually worked out well on my back, so maybe this little guy will get drops... then I just have to do the whole where to put the shifter thing again.
Speaking of shifting, so far I'm pretty unimpressed with the SRAM Spectro P5... as compared to their 3-speed, this thing ain't so great. Ghost shifts and poor shifting a lot, gonna try adjusting cable length to help.
So, parts list to date:
RST Suspension fork (threaded at Harriscyclery, other places wouldn't do it, but you can count on Harris cyclery!)
Shimano 105 headset
Shimano front canti's (the new BR ones, pretty nice they are)
Zoom adjustable stem
Ritchey flat bar
Bar ends picked up at the Bicyclekitchen here in LA
Third eye mirror
Cheap cyclocomputer
Ritchey WCS brake levers (had them sitting around in my toolbox from an SS I built a few years back)
Thomson seat post
Brooks Conquest saddle
OMM rack
Sachs P5 hub
Sugino RD cranks
Phil cups
Shimano UN72 113mm BB from ebay
MKS quick release pedals
Original rear brakes with Eagle 2 pads
Front wheel is 406, Primo comet tire
Rear wheel is 451, Primo comet tire
So, yeah, still debating the cockpit, will try raising it up a bit, but... maybe the cruiser bars... or drops, who knows... don't want to have to switch out the saddle and I don't think the conquest would be so good with cruiser bars. This is my only bike right now, took the parts with me from Boston when I came out to LA, my 3 speed road bike is still in MA... and I don't think I'm staying in LA, probably off to Portland, so I'm not sure what my riding will be like.... whatever... work in progress. ramble ramble ramble.
My impressions thus far:
Powergrips: gotta go, they were free, and good thing too. I'll be getting some toe clips and straps soon.
Steering: wooo, scary at high speeds!
Cockpit: I have no idea why I decided to go back with flat bars, I think it was the whole - no one makes thumb shifters for internal gears anymore so all I had was the twist shifter, which - yes there are ways to work them on drop bars but I dunno. Anyway, the flat bars... I just don't know... my left hand always gets the brunt of the pain and numbness on flat bars, I might raise them up more. I'm also seriously pondering getting some albatrosses or dove bars and doing a more upright cafe cruiser ride out of the whole lot. Very fluid. The most comfortable bikes I've ridden have always had more upright than not, terrible lower back pains usually for me, docs always just say "uh, try calisthenics." Though, my bike back in Mass has drops and they usually worked out well on my back, so maybe this little guy will get drops... then I just have to do the whole where to put the shifter thing again.
Speaking of shifting, so far I'm pretty unimpressed with the SRAM Spectro P5... as compared to their 3-speed, this thing ain't so great. Ghost shifts and poor shifting a lot, gonna try adjusting cable length to help.
So, parts list to date:
RST Suspension fork (threaded at Harriscyclery, other places wouldn't do it, but you can count on Harris cyclery!)
Shimano 105 headset
Shimano front canti's (the new BR ones, pretty nice they are)
Zoom adjustable stem
Ritchey flat bar
Bar ends picked up at the Bicyclekitchen here in LA
Third eye mirror
Cheap cyclocomputer
Ritchey WCS brake levers (had them sitting around in my toolbox from an SS I built a few years back)
Thomson seat post
Brooks Conquest saddle
OMM rack
Sachs P5 hub
Sugino RD cranks
Phil cups
Shimano UN72 113mm BB from ebay
MKS quick release pedals
Original rear brakes with Eagle 2 pads
Front wheel is 406, Primo comet tire
Rear wheel is 451, Primo comet tire
So, yeah, still debating the cockpit, will try raising it up a bit, but... maybe the cruiser bars... or drops, who knows... don't want to have to switch out the saddle and I don't think the conquest would be so good with cruiser bars. This is my only bike right now, took the parts with me from Boston when I came out to LA, my 3 speed road bike is still in MA... and I don't think I'm staying in LA, probably off to Portland, so I'm not sure what my riding will be like.... whatever... work in progress. ramble ramble ramble.
Last edited by robertsdvd; 03-27-05 at 08:20 PM.
#2
Senior Member
Originally Posted by robertsdvd
Well, this weekend I took my newly updated Raleigh Twenty out for a spin in the Joshua Tree National Park, picture attached (more pictures of the park can be found at www.robertsdvd.net/phlog).
Originally Posted by robertsdvd
My impressions thus far:
Powergrips: gotta go, they were free, and good thing too. I'll be getting some toe clips and straps soon.
Powergrips: gotta go, they were free, and good thing too. I'll be getting some toe clips and straps soon.
Originally Posted by robertsdvd
Steering: wooo, scary at high speeds!
Originally Posted by robertsdvd
Cockpit: I have no idea why I decided to go back with flat bars, I think it was the whole - no one makes thumb shifters for internal gears anymore so all I had was the twist shifter, which - yes there are ways to work them on drop bars but I dunno. Anyway, the flat bars... I just don't know... my left hand always gets the brunt of the pain and numbness on flat bars, I might raise them up more. I'm also seriously pondering getting some albatrosses or dove bars and doing a more upright cafe cruiser ride out of the whole lot. Very fluid. The most comfortable bikes I've ridden have always had more upright than not, terrible lower back pains usually for me, docs always just say "uh, try calisthenics." Though, my bike back in Mass has drops and they usually worked out well on my back, so maybe this little guy will get drops... then I just have to do the whole where to put the shifter thing again.
I've run flat bars and cowhorn bars on my twenty and changing the bars totally changes the feel of the bike. If you can sort out the shifters, there are a lot of options.
On the shifters, Sheldon Brown has a page on his website that describes mounting twist shifters on a curved handlebar here. I think he also had a picture of a short twist shifter mounted on a fat barend attached to the stem of one of his bikes, but I can't find it now.
Another option is to get split bars from Bike Friday. They sell a variety of bars that come apart in the middle , here . They will also cut and sleeve bars that you send them for a price, listed here
You could buy split drop bars and mount the twist shifter on the tops by sliding the bars through into the stem.
Speaking of shifting, so far I'm pretty unimpressed with the SRAM Spectro P5... as compared to their 3-speed, this thing ain't so great. Ghost shifts and poor shifting a lot, gonna try adjusting cable length to help.
Originally Posted by robertsdvd
So, parts list to date:
...
So, yeah, still debating the cockpit, will try raising it up a bit, but... maybe the cruiser bars... or drops, who knows... don't want to have to switch out the saddle and I don't think the conquest would be so good with cruiser bars. This is my only bike right now, took the parts with me from Boston when I came out to LA, my 3 speed road bike is still in MA... and I don't think I'm staying in LA, probably off to Portland, so I'm not sure what my riding will be like.... whatever... work in progress. ramble ramble ramble.
...
So, yeah, still debating the cockpit, will try raising it up a bit, but... maybe the cruiser bars... or drops, who knows... don't want to have to switch out the saddle and I don't think the conquest would be so good with cruiser bars. This is my only bike right now, took the parts with me from Boston when I came out to LA, my 3 speed road bike is still in MA... and I don't think I'm staying in LA, probably off to Portland, so I'm not sure what my riding will be like.... whatever... work in progress. ramble ramble ramble.
My Twenty
#3
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've been the clipless route, didn't care for it at all, I prefer the toe clips and straps.
Yeah, I've been all over looking for interesting ways to mount twist shifters on drop bars... my other ride in Mass has the shifter on a Minoura Spacebar coming off the flat, worked well.
Gonna work on adjusting the P5 again tonight, see if I can get it working a little more smoothly.
Other than that still contemplating albatross bars (as all I'd have to do is get the bars, keep stem and cockpit controls)... the other thought then is whether they would then necessitate the use of a B.66 or similar saddle... since the Conquest was free, I could cope with it, but I'd certainly try to alabtrosses with the Conquest first... as I wouldn't run the albas over saddle height. All-in-all, its a fun bike, might be a nice cafe-cruiser all the same.
Yeah, I've been all over looking for interesting ways to mount twist shifters on drop bars... my other ride in Mass has the shifter on a Minoura Spacebar coming off the flat, worked well.
Gonna work on adjusting the P5 again tonight, see if I can get it working a little more smoothly.
Other than that still contemplating albatross bars (as all I'd have to do is get the bars, keep stem and cockpit controls)... the other thought then is whether they would then necessitate the use of a B.66 or similar saddle... since the Conquest was free, I could cope with it, but I'd certainly try to alabtrosses with the Conquest first... as I wouldn't run the albas over saddle height. All-in-all, its a fun bike, might be a nice cafe-cruiser all the same.
#4
Senior Member
Join Date: Jul 2003
Location: in bed with your mom
Posts: 13,696
Bikes: who cares?
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
If it were mine, I'd raise the bars, probably by using a set of bmx, raleigh chopper or stingray-style bars w/ a moderate rise to them.
#5
Hauja
Join Date: Mar 2005
Location: Central North Dakota
Posts: 848
Bikes: not as many but still too many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I think north road handlebars would give you more hand positions and you should still be able to mount the twist shifter with no problems . Another alternative would be moustache bars .Either one will complicate folding though .I think drops would make folding more difficult than either north roads or moustache bars .
Last edited by James H Haury; 03-28-05 at 01:14 PM.
#6
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by James H Haury
I think north road handlebars would give you more hand positions and you should still be able to mount the twist shifter with no problems . Another alternative would be moustache bars .Either one will complicate folding though .I think drops would make folding more difficult than either north roads or moustache bars .
#7
Hauja
Join Date: Mar 2005
Location: Central North Dakota
Posts: 848
Bikes: not as many but still too many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by robertsdvd
Yeah, I'm probably gonna git me a pair of albatrosses and go a more traditional route. Eaze-of-folding isn't a top priority as I only fold to get in the car or for storage... so if it takes a few extra moments, no big deal to me!
#8
Raleigh20 PugFixie, Merc
Originally Posted by robertsdvd
I took my newly updated Raleigh Twenty out for a spin in the Joshua Tree National Park
Originally Posted by robertsdvd
Powergrips: gotta go, they were free, and good thing too...
Originally Posted by robertsdvd
Steering: wooo, scary at high speeds!
a) I'm more used to it now coming from 26" wheels.
b) the pressure on the front will be a bit less than the 110 psi I started with
c) I lowered the stem about an inch.
d) I learned that the handling significantly improves with the frame bolt tightened as tight as it can possibly go.
Might seem obvious but 'hand tight' seemed fine till everything went all wobbly. Obviously a good idea to anti-seize grease it before this...
Originally Posted by robertsdvd
Cockpit: I have no idea why I decided to go back with flat bars
Originally Posted by robertsdvd
Speaking of shifting, so far I'm pretty unimpressed with the SRAM Spectro P5... as compared to their 3-speed, this thing ain't so great. Ghost shifts and poor shifting a lot, gonna try adjusting cable length to help.
Not sure how easy it will be to shorten your cable - it's a sealed system isn't it?
Maybe twiddling that adjuster next to the clickbox (if a 5 is the same as a 7) will help?
Originally Posted by robertsdvd
Front wheel is 406, Primo comet tire
Rear wheel is 451, Primo comet tire
Rear wheel is 451, Primo comet tire
Anyway thanks for sharing your bike... It's lovely - we must go for a ride if you ever come to the uk. Just been going through your blog. I love your other photos as well...
When the weather gets a bit better I hope to start fixing my Ixus to the Twenty (I have a clamp), linked by USB to my laptop in the pannier and the remote capture software taking shots every 5 seconds to do some timelapses of my commute / weekend rides. Should be fun as I long as I don't smash the PowerBook... hahaha
Oooh... I got a new 54t ring in the post today from ebay so more speed for me!
__________________
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
Last edited by LittlePixel; 03-29-05 at 11:15 AM.
#9
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks Littlepixel. Yeah, I dig your timelapse idea, I've been chomping at the bit to do a similar project, but I'd much prefer a camera that'll do timelapse integrally. So far the options are limited, but I'm still looking. The 007 Zippo cam does but has small images, some older Kodaks do, but reguarly go for 80-120 bucks on ebay for 1.3MP.
I chose two different size wheels to try and compensate for the suspension fork, think it has worked for the most part... don't seem to be a lot of wide 451mm tires though... might go with a 1 3/8 instead of the 1 1/8 since I'll be going a little more upright I think with the albatross bars.
The SRAM hub isn't too sealed... the clickbox window comes off and I think if you take the shifter off you can access the cable through there too, which is a bit of a hassle since it doesn't appear that you can replace the shift cable without removing at least the grip.
I'm waiting to hear back from Rivendell what the big differences are between the dove bars and the alum. albatross bars 'sides some weight and width... if the sweep is any different... oh so many nice parts, so little money and daylight.
I chose two different size wheels to try and compensate for the suspension fork, think it has worked for the most part... don't seem to be a lot of wide 451mm tires though... might go with a 1 3/8 instead of the 1 1/8 since I'll be going a little more upright I think with the albatross bars.
The SRAM hub isn't too sealed... the clickbox window comes off and I think if you take the shifter off you can access the cable through there too, which is a bit of a hassle since it doesn't appear that you can replace the shift cable without removing at least the grip.
I'm waiting to hear back from Rivendell what the big differences are between the dove bars and the alum. albatross bars 'sides some weight and width... if the sweep is any different... oh so many nice parts, so little money and daylight.
#10
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Got the response from Riv... Dove is merely a bit more narrow and can't take barend shifters. Similar weight on the two. I don't need to worry about bar end shifters... guess the only real advantage would be you could put the bar end blinkie lights in the albatross but not the dove, not sure if that's worth an extra 25 bucks... Reckon the dove is nicer cause its narrower... though only 3.5cm... pardon - thinking out loud..
#12
floor sleeper
Thread Starter
Join Date: Jun 2002
Location: Here and there in the US
Posts: 998
Bikes: Raleigh Twenty, Puch 3 speed road conversion, lookin' into a Karate Monkey for a cruiser
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Originally Posted by James H Haury
Check your lbs too they might have northroads.nashbar has mustaches.
#13
Senior Member
Join Date: May 2004
Posts: 111
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Beach cities cycle in Hermosa beach. I can't reccomend them enough. They had, in stock, the following:
Silca Impero frame pump in white
Cinelli model 66 bars
Indicator chain for my wife's raleigh twenty
Campy old 9-speed lockring.
Silca Impero frame pump in white
Cinelli model 66 bars
Indicator chain for my wife's raleigh twenty
Campy old 9-speed lockring.
#14
Hauja
Join Date: Mar 2005
Location: Central North Dakota
Posts: 848
Bikes: not as many but still too many
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I am sorry to hear that you were unable to find a good shop. .You might be able to find northroads in a well established shop. I think the best shops to patronize have been around for years and have an owner who has been working on bikes for a long time. I found a shop in madison wisconson, [url]www.yellowjersey.com That fixed my wheel for a reasonable price when all the local shops wanted to sell me a new wheel to fix my problem. They fixed it and it only cost me about 41 bucks as opposed to 140.Those kind of shops are the best.
#15
Raleigh20 PugFixie, Merc
Does anyone know what happened to Robertsdvd? He's never on here any more and his blog hasn't been updated for like ever. It feels odd when someone disappears off the internet. Hope he's ok.
LP.
LP.
__________________
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
My Raleigh Twenty site | foldr : A flickr pool | #6460, #5632 & #3407 on the fixedgeargallery
#16
Senior Member
Join Date: Nov 2003
Location: Forest Park Il
Posts: 876
Bikes: Yeah Dahon Bike Friday Panasonic Dyno
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
he could be out riding or pursuing another interest. he may be a watch collector as well. I have not posted for a while because you feel like you have said everything there is to say .You become tired