How many Klein riders out there?
#51
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,194
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1565 Post(s)
Liked 1,296 Times
in
866 Posts
1990 Quantum -- Bought it for the color and admittedly dont have more than 5 miles on it yet. I'm too spoiled by brifters and am waffling on whether to pay the tariff for nice Dura Ace 7400 series brifters ($150-$250 or so ) --- but will likely do so as Spring gets here
I need to square away and service all the bearing sets , but need to research what to do with the bottom bracket
I need to square away and service all the bearing sets , but need to research what to do with the bottom bracket
Also would be possible to remove the crank arms and the bearing seals, but some bit of grit WILL end up inside of each bearing.
I've ridden older but similar Viscount BB's "to death" with no maintenance and couldn't kill them.
I would use the much-lighter, easier-to-find 10s STI levers, derailer, chain (and cassette on your 8s freehub), will perform better, feel better in your hands and offer wider ratio options like the 12-30t cassette.
The comparable 8s parts are boat-anchor heavy, less common to find, less ergonomic, etc.
The 8s chainrings should work fine with 10s chain (the small ring can be beveled slightly if needed to prevent chain skating).
Last edited by dddd; 02-15-22 at 09:02 PM.
Likes For dddd:
Likes For bamboobike4:
#53
Go Ride!
Join Date: May 2019
Location: Minnesota—55346
Posts: 268
Bikes: Klein Quantum Pro, Klein Attitude, Azuki SS, Merckx AXM, Klein Quantum Race, Klein Quantum
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 155 Times
in
87 Posts
After rotating thru early Quantums to Race and Pros, both pre and post Trek, I’d have to say the deep paint and gorgeous ‘over-build’ of the early Quantums (NB chain-stays) was never excelled, but the later (still Chehalis) Races and Pros are exceptionally lighter and a better ride. The paint gets ‘thinner’ but the colors are just as vibrant, and the fork technology and geometry are outstanding. I’ve finally settled into two exceptional Pros and a beat up Race that cover all my needs, so the rest have to go at some point…just hard to let go of an old frame once you’ve ridden it for awhile.
Likes For Sonofamechanic:
#54
Full Member
Join Date: Jul 2010
Location: Worcester, MA, USA
Posts: 411
Bikes: Dawes Lightning DLX, 1988 Klein Performance, 1991 Peugeot Safari, 1985 Raleigh Alyeska, Carrera Phantom, 1973 Raleigh Record
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 282 Post(s)
Liked 129 Times
in
92 Posts
I don't remember exactly when I got it, but I got my Performance around 10 years ago from a dentist in Natick, if I recall correctly. It's got Shimano 105 components. I think the rims are Mavic SUP. It's a Columbus fork. A year or two ago, I leaned it against a railing while I was rearranging my basement and it fell over against a concrete step, putting a dent in the top tube. I still ride it, but I still kick myself over that. Today, I finally got around to wrapping a strip from an old inner tube around the chain stay, then realized I'd wrapped it around the RD cable, too. Maybe it'll shift okay, anyway. If not, it's not a big deal to remove it. Guess I should just remove it and find another solution. Sigh.
Getting groceries
Clean and lube
Getting groceries
Clean and lube
Likes For RichSPK:
#55
Full Member
Join Date: Jul 2010
Location: Worcester, MA, USA
Posts: 411
Bikes: Dawes Lightning DLX, 1988 Klein Performance, 1991 Peugeot Safari, 1985 Raleigh Alyeska, Carrera Phantom, 1973 Raleigh Record
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 282 Post(s)
Liked 129 Times
in
92 Posts
I don't remember exactly when I got it, but I got my Performance around 10 years ago from a dentist in Natick, if I recall correctly. It's got Shimano 105 components. I think the rims are Mavic SUP. It's a Columbus fork. A year or two ago, I leaned it against a railing while I was rearranging my basement and it fell over against a concrete step, putting a dent in the top tube. I still ride it, but I still kick myself over that. Today, I finally got around to wrapping a strip from an old inner tube around the chain stay, then realized I'd wrapped it around the RD cable, too. Maybe it'll shift okay, anyway. If not, it's not a big deal to remove it. Guess I should just remove it and find another solution. Sigh.
Likes For EnzoRWD:
#58
Junior Member
Join Date: Aug 2010
Posts: 116
Bikes: 1939 The James Arrow Ace Convertible Touring Tandem, 1950 Dunelt cruiser, 1960 Robin Hood Sports, 1972 Humber Sports, 1986 Panasonic Touring Deluxe
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 61 Times
in
19 Posts
Klein Navigator
Here is a Klein Navigator I picked up in early March. It came to me already upgraded with Brooks bar tape, saddle, hand built wheels, and VO fenders. The drivetrain/brifters were also updated before I got it. All I did was add the VO front and rear racks. This is a shot from the High Trestle trail two weeks ago. I look forward to taking this touring this summer.
Likes For Mike from Iowa:
#59
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,671
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2323 Post(s)
Liked 4,988 Times
in
1,776 Posts
It's only been a year so time to bring this back to life.
I'm back in the Klein family after yesterday's local pickup. I had sold my Frankenstein Quantum II last year but missed how well it rode. I had my eye on an earlier Quantum Race over in town and then the exact same year/model showed up for sale about a mile from the house. Plus it was less than 1/2 the price of the other one. Had some free time yesterday afternoon so I went and checked it out and then brought it home. It appears to be a pretty much unmolested and little used 23 year old beauty. Overall condition seems great once I cleaned it up. One major paint blemish and then tiny chip or two on the bike, no dings at all. Mismatched STI shifters for some reason but pretty sure I have the needed mate in my parts stash.
Gave it a quick clean and service last night and intend to take it out for a test ride today. Swapped out the Rolf wheels and dry rotted tires for some nice Zonda's I had and some new Vittoria rubber. It was 19 lbs 9 ozs when I brought it home. Listed weight in the 2000 Klein Tech Specs was 18.5 lbs. The wheel swap and bottle cage swapped dropped it to 19 lbs 1 ozs. These weights with those funky and heavy flat pedals. When I swap them for some proper Look Keo's it will drop more. If I really like the ride of this it may get the Dura Ace 7700 or Ultegra 6800 groupset I have stashed. If it proves to be harsher than the Quantum II I'll probably put the Rolf back on and pass it on at the low price I got it.
The crusty beast I brought home
After a quick clean and service and wheel swap.
Cassette looks pretty new and chain shows no wear. Need to pull and service the jockey wheels still and then degrease the RD better.
Need to hit the crank and chainrings with some serious degreaser.
The spot here is the only real paint damage
Brake pads felt fine on a real short test last night
One of the more subtle Klein paint jobs.
Need to figure out if that's a stain in the paint or adhesive residue above this metal plate.
Glad to get a chance to ride one with the originl fork. My other Klein had a replaced fork.
I'm back in the Klein family after yesterday's local pickup. I had sold my Frankenstein Quantum II last year but missed how well it rode. I had my eye on an earlier Quantum Race over in town and then the exact same year/model showed up for sale about a mile from the house. Plus it was less than 1/2 the price of the other one. Had some free time yesterday afternoon so I went and checked it out and then brought it home. It appears to be a pretty much unmolested and little used 23 year old beauty. Overall condition seems great once I cleaned it up. One major paint blemish and then tiny chip or two on the bike, no dings at all. Mismatched STI shifters for some reason but pretty sure I have the needed mate in my parts stash.
Gave it a quick clean and service last night and intend to take it out for a test ride today. Swapped out the Rolf wheels and dry rotted tires for some nice Zonda's I had and some new Vittoria rubber. It was 19 lbs 9 ozs when I brought it home. Listed weight in the 2000 Klein Tech Specs was 18.5 lbs. The wheel swap and bottle cage swapped dropped it to 19 lbs 1 ozs. These weights with those funky and heavy flat pedals. When I swap them for some proper Look Keo's it will drop more. If I really like the ride of this it may get the Dura Ace 7700 or Ultegra 6800 groupset I have stashed. If it proves to be harsher than the Quantum II I'll probably put the Rolf back on and pass it on at the low price I got it.
The crusty beast I brought home
After a quick clean and service and wheel swap.
Cassette looks pretty new and chain shows no wear. Need to pull and service the jockey wheels still and then degrease the RD better.
Need to hit the crank and chainrings with some serious degreaser.
The spot here is the only real paint damage
Brake pads felt fine on a real short test last night
One of the more subtle Klein paint jobs.
Need to figure out if that's a stain in the paint or adhesive residue above this metal plate.
Glad to get a chance to ride one with the originl fork. My other Klein had a replaced fork.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
Likes For jamesdak:
#60
Go Ride!
Join Date: May 2019
Location: Minnesota—55346
Posts: 268
Bikes: Klein Quantum Pro, Klein Attitude, Azuki SS, Merckx AXM, Klein Quantum Race, Klein Quantum
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 155 Times
in
87 Posts
Klein Quantum Pro fixie attempt
Had a Klein Quantum Z set up as a fixie (cracked rear dropout so converted to horizontal dropouts) but the Campy Pista crankset outclassed the bike…so swapped out and built up this Quantum Pro with the Campy Pista crankset and a set of White Industries ENO hubs (rear is eccentric flip flop) laced to Mavic CXP30’s. Seems a better set up for a fixie but need to do some climbing to see if eccentric hub holds under vigorous pedaling. Still need to pick up a Campy front brake caliper (Shimano 600 in the meanwhile.) Lots of fun to look at anyway.
Likes For Sonofamechanic:
#61
Groupetto Dragon-Ass
Join Date: May 2005
Location: Lostin Austin, TX
Posts: 616
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 414 Post(s)
Liked 785 Times
in
371 Posts
Got a second Klein last Fall to go with my '98 Quantum Race that was already posted.
1989 Klein Quantum from the second owner.
It was raced for the Helotes Cycle Shop by the original owner, then passed on to his buddy who raced for their mountain bike team as his training bike.
Repainted and re-decaled along the way, Campy crank and Phil hubs. Aluminum fork, but is that Klein or aftermarket?
Stiff, but not as bad as the second owner warned me!
1989 Klein Quantum from the second owner.
It was raced for the Helotes Cycle Shop by the original owner, then passed on to his buddy who raced for their mountain bike team as his training bike.
Repainted and re-decaled along the way, Campy crank and Phil hubs. Aluminum fork, but is that Klein or aftermarket?
Stiff, but not as bad as the second owner warned me!
Likes For Chuckk:
#62
Go Ride!
Join Date: May 2019
Location: Minnesota—55346
Posts: 268
Bikes: Klein Quantum Pro, Klein Attitude, Azuki SS, Merckx AXM, Klein Quantum Race, Klein Quantum
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 109 Post(s)
Liked 155 Times
in
87 Posts
Early Quantum’s came with polished aluminum fork—so best guess is its original. Re. stiffness…its still amazing to me how comfortable a Klein Quantum rides when a Cannondale aluminum frame of the same era is an extremely ‘brittle’ ride—and yet somehow Klein keeps the stiffness for acceleration.
Likes For Sonofamechanic:
#63
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
Meine Klein ist groß. 63cm. Wheelbase must be 44 inches. I had a Cannonwhale and a Performance Elite, still have the Klein but have not ridden it in 25 years.
#64
Full Member
Join Date: Jan 2023
Posts: 469
Bikes: Two Peter Mooney customs, a 1980 Trek 510 townie, a Marin Stelvio set up for TTs.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 228 Post(s)
Liked 294 Times
in
161 Posts
And I'm even later. That sounds so much like the boron stayed dark teal Team Super (just like the brochure photo) a local bloke rode in the eighties in my neck of the woods. A few summers ago, it was sitting in the window of my LBS with no takers, and it was given to one of the long term shop rats. I think the main reason for the failure to sell was the resolutely narrow spaced rear DOs. I never got to sit on that bike, so no visceral impressions for me. The closest thing to an epiphany for me riding a prototype bike was an all too short spin on a Slingshot road prototype. For such a weird bike, it was an amazing climber and far less wiggly than one would expect.
#65
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
Yes, the Klein does not take a fat rear tire despite wicked long chain stays. I could not fit my beloved Specialized Expeditions on it. I think 28 or maybe 32mm was the widest
Thread
Thread Starter
Forum
Replies
Last Post
cremated
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
6
05-28-18 09:35 PM