Tempe vs 1030+ temperature readings
#1
Senior Member
Thread Starter
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,993
Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times
in
306 Posts
Tempe vs 1030+ temperature readings
What do you think takes a more accurate temperature reading? The tempe attached to my black cycling shoe OR the temperature reading that comes from the Edge 1030+?
#2
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,495
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2374 Post(s)
Liked 1,691 Times
in
1,065 Posts
Seems like an invitation to pontificate. Therefore:
On a cloudy day, probably the 1030+. Unless you're riding very fast, I'd expect the heat from your foot through the shoe would give you an erroneously elevated temperature reading. However, on a sunny day, I've seen bar-mount GPS readings 5-8F high because of solar heating. Of course, the black shoes would warm things up there, too.
For best accuracy, get a thermometer zipper pull and attach it to your saddle bag (or saddle rail). $20 and you don't need to worry about sun or not, because your bottom will shade the thermometer and the separation from your body will minimize body heating.
On a cloudy day, probably the 1030+. Unless you're riding very fast, I'd expect the heat from your foot through the shoe would give you an erroneously elevated temperature reading. However, on a sunny day, I've seen bar-mount GPS readings 5-8F high because of solar heating. Of course, the black shoes would warm things up there, too.
For best accuracy, get a thermometer zipper pull and attach it to your saddle bag (or saddle rail). $20 and you don't need to worry about sun or not, because your bottom will shade the thermometer and the separation from your body will minimize body heating.
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 13,749
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 5609 Post(s)
Liked 4,280 Times
in
2,947 Posts
The Tempe is made for taking temperature readings and is probably more responsive to changing temperatures. The temp sensor on the Edge devices AFAIK are buried on the circuit board and likely aren't as responsive to temperature change. So the temp reading of your Edge device probably lags what the actual temp is as you ride from cooler to warmer areas. Even the Tempe likely has some amount of lag to it.
I can look at the temp data from my Edge 530 and see that it takes it about 4 - 5 minutes to come from the air conditioned temps of my home to the outside air temps on a hot day. It seems a tad faster than my Edge 500 which IIRC, it took almost twice as long for it to get to ambient temps.
Which is more accurate or which is more precise I don't know.
I can look at the temp data from my Edge 530 and see that it takes it about 4 - 5 minutes to come from the air conditioned temps of my home to the outside air temps on a hot day. It seems a tad faster than my Edge 500 which IIRC, it took almost twice as long for it to get to ambient temps.
Which is more accurate or which is more precise I don't know.
#4
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 6,830
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,617 Times
in
1,712 Posts
i've taken note that the bicycle computer is much slower to react to temp swings, but if given some standby time, it'll read accurate. It'll be much more real-time accurate than the "local temps" displayed on the app.
__________________
-Oh Hey!
-Oh Hey!
#5
Super Moderator
Join Date: Jun 2002
Location: Central Illinois
Posts: 22,782
Bikes: Trek Emonda, Giant Propel, Colnago V3, Co-Motion Supremo, ICE VTX WC
Mentioned: 106 Post(s)
Tagged: 1 Thread(s)
Quoted: 10416 Post(s)
Liked 4,037 Times
in
1,866 Posts
Reminds me of Segal’s Law, “A man with a watch knows what time it is. A man with two watches is never sure.” I’ve found this to be true with temperature readings on bike computers and other devices. After awhile, I try to settle on one and even then, take the reading with a grain of salt.
Given that, I'd probably trust a dedicated instrument over a bike computer of any make.
Given that, I'd probably trust a dedicated instrument over a bike computer of any make.
__________________
Keep the chain tight!
Likes For Trsnrtr:
#6
Senior Member
Thread Starter
Join Date: Jul 2017
Location: Pacific Northwest
Posts: 1,993
Bikes: Argon 18 Gallium, BH G7, Rocky Mountain Instinct C70
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 800 Post(s)
Liked 512 Times
in
306 Posts
Thanks folks. I use the tempe for temperature readings when running b/c the temperature reading from my 745 are unreliable. My body heat really throws off the readings. The tempe on my shoe is much more accurate. Perhaps I will start using the tempe for cycling too.
#7
Senior Member
Join Date: Jan 2020
Posts: 2,204
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 639 Post(s)
Liked 868 Times
in
510 Posts
the Garmin is pretty accurate as long as your moving. but its a little slow. the Karoo is really fast but its 3 degrees off. in the summer you are more likely to get the pavement temps. when it was 117 degrees here I had the pavement temp of 135 degrees. but that was pretty accurate say you felt backed the blacktop.