Rear wheel does not spin freely...
04-11-24, 06:29 AM
#1
Full Member
Thread Starter
Rear wheel does not spin freely...
Noticed this the other day. Giant SLR-2 wheels. When I spin the pedals, it seem to slow down and stop rather abruptly. I thought that maybe the disc was rubbing, but thats not the case. I took it all apart, didnt remove the bearings, cleaned it all and applied new lube. Same thing. Another thing I have noticed is that sometimes when I coast, there is this grinding noise coming from the hub. Any ideas?
04-11-24, 07:28 AM
#2
Full Member
Noticed this the other day. Giant SLR-2 wheels. When I spin the pedals, it seem to slow down and stop rather abruptly. I thought that maybe the disc was rubbing, but thats not the case. I took it all apart, didnt remove the bearings, cleaned it all and applied new lube. Same thing. Another thing I have noticed is that sometimes when I coast, there is this grinding noise coming from the hub. Any ideas?
Likes For 13ollocks:
04-11-24, 07:47 AM
#3
Full Member
Thread Starter
Likes For crazyravr:
04-11-24, 07:53 AM
#4
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 38,824
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 140 Post(s)
Tagged: 1 Thread(s)
Quoted: 5840 Post(s)
Liked 2,673 Times
in
1,488 Posts
Take the wheel off and spin it holding the axle in your fingers. Try it both letting the cassette turn with it, and not letting it turn.
You're feeling and listening for roughness in either the hub bearings, or freehub unit.
You're feeling and listening for roughness in either the hub bearings, or freehub unit.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
Likes For FBinNY:
04-11-24, 09:24 AM
#5
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,122
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 854 Post(s)
Liked 1,445 Times
in
822 Posts
Do you want the wheel to spin freely, as it should, or would you rather have a noisy hub that grinds it's way to slowness and ruin. Either get the tools and knowledge for DIY, or take it to someone/somewhere that knows wheel building and maintenance.
04-11-24, 09:50 AM
#6
Senior Member
Join Date: Jun 2002
Location: San Jose, CA
Posts: 3,714
Bikes: Too many bikes, too little time to ride
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 442 Post(s)
Liked 472 Times
in
327 Posts
Could be something related to the freehub body (eg, one of the pawls springs being dislocated), could be a bent out damaged axle, or bearings.
Likes For tFUnK:
04-11-24, 12:18 PM
#8
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,389
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1002 Post(s)
Liked 1,219 Times
in
697 Posts
How quickly does the wheel come to a stop? Rear wheels on the bike do not spin for as long as fronts. Beyond that, the bearings in those stock wheels aren't the best. Also, it's sometimes possible to overtighten a skewer/thru axle to the point of binding the bearing.
Does it have the same problem if you take the chain off the cassette and spin it? Or take the wheel off and spin it?
Does it have the same problem if you take the chain off the cassette and spin it? Or take the wheel off and spin it?
__________________
It's like riding a bicycle
It's like riding a bicycle
04-16-24, 01:17 PM
#10
Senior Member
Join Date: Apr 2016
Posts: 1,286
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 520 Post(s)
Liked 461 Times
in
353 Posts
Noticed this the other day. Giant SLR-2 wheels. When I spin the pedals, it seem to slow down and stop rather abruptly. I thought that maybe the disc was rubbing, but thats not the case. I took it all apart, didnt remove the bearings, cleaned it all and applied new lube. Same thing. Another thing I have noticed is that sometimes when I coast, there is this grinding noise coming from the hub. Any ideas?
