Any experience with Jonnisnot vs Sil-Glyde for twist-shifter lubrication?
#1
Full Member
Thread Starter
Join Date: Aug 2020
Posts: 244
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 38 Times
in
27 Posts
Any experience with Jonnisnot vs Sil-Glyde for twist-shifter lubrication?
Subject line says it all. Sil-Glyde is a silicone lubricant. I've read that so is Jonnisnot. Is there enough of a difference between them to care about?
Last edited by MyRedTrek; 04-25-22 at 11:53 PM.
#3
Senior Member
Join Date: Jan 2013
Posts: 2,685
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 595 Times
in
412 Posts
No both are good for plastics use, in very general terms all you need to do is try not to use a lube with a petroleum base (like typical lithium lubes) as it can accelerate the decay of your plastic and rubber and you will get good service. I think around here the Sil-Glyde is a bit cheaper since Sram took over Jonnisnot.
Last edited by easyupbug; 04-26-22 at 08:12 AM.
#4
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,687
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 841 Post(s)
Liked 1,071 Times
in
749 Posts
I would just stick with the Sil-Glyde. In a short search I couldn't find anything stating what's in the Jonnisnot grease. Sil-Glyde just works, is cheaper, and can be used for many other applications such as plastics, electrical switches and corrosion protection for elec connectors (it's dielectric) and resists high heat. Jonnisnot,??
#5
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,525
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2750 Post(s)
Liked 3,407 Times
in
2,062 Posts
Likes For easyupbug:
Likes For grizzly59:
#9
Full Member
I see Jonnisnot described as a "fluorocarbon gel". The tube I have notes that it contains fluorocarbon polymer.
This page from bike-components.de claims that it is Fluorocarbon Gel 880 from Nye Lubricants.
According to Nye Lubricants, it is a "PTFE-thickened, heavy viscosity dimethyl silicone grease".
This page from bike-components.de claims that it is Fluorocarbon Gel 880 from Nye Lubricants.
According to Nye Lubricants, it is a "PTFE-thickened, heavy viscosity dimethyl silicone grease".
Last edited by John Valuk; 04-26-22 at 09:39 PM.
Likes For John Valuk:
#10
Droid on a mission
Join Date: May 2018
Location: Palm Coast, FL
Posts: 1,006
Bikes: Diamondback Wildwood Classic
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 317 Post(s)
Liked 281 Times
in
195 Posts
Being a retired technician/electrician, I still carry a container of Dielectric grease in my tool bag that I have tried for lubing twist shifters and have been very satisfied with
You cane purchase this at Home Depot and other stores https://www.homedepot.com/p/CRC-3-3-...5113/206843029
I carry this to protect electrical connections in damp locations, also great for batteries/bulbs, etc. Perfect for trailer connection plugs to prevent corrosion
You cane purchase this at Home Depot and other stores https://www.homedepot.com/p/CRC-3-3-...5113/206843029
I carry this to protect electrical connections in damp locations, also great for batteries/bulbs, etc. Perfect for trailer connection plugs to prevent corrosion
__________________
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
JoeTBM (The Bike Man) - I'm a black & white type of guy, the only gray in my life is the hair on my head
www.TheBikeMenOfFlaglerCounty.com
Last edited by JoeTBM; 04-26-22 at 11:56 PM.
Likes For JoeTBM:
#11
Senior Member
Join Date: Aug 2016
Posts: 712
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 262 Times
in
164 Posts