Looking for 26 inch Rim brake carbon wheelset
#1
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Looking for 26 inch Rim brake carbon wheelset
Like the title says. Do they make such a wheel. I need a rear wheel specifically. My front fork is disc brake compatible. And if someone does make one, does it come in a 135mm hub.
#2
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,930
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,696 Times
in
976 Posts
Which 26" wheel size are you asking about? There are at least 6
https://www.sheldonbrown.com/tyre-sizing.html
https://www.sheldonbrown.com/tyre-sizing.html
Likes For alcjphil:
#3
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Im not sure what you mean. I am looking for 26 inch carbon rim. Are you asking about rim width? if so, anything from 19 to 29. Rim width isnt important. I will be buying a new tireset to go with whatever rim i get. At this point, i am looking for ANY 26 inch carbon wheelset with rim brake capability. It doesnt even matter if they also have disc brake mounting as well(I know dual rims exist).
Last edited by mental8y123; 10-07-22 at 08:45 AM.
#4
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,116
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1789 Post(s)
Liked 1,629 Times
in
933 Posts
If you have to ask, you're probably looking for 559mm.
There is also:
571
584
590, (sometimes marked as 591)
597
599
None of which (except 584) you will probably encounter if the bike was made in the last 30 years or so.
The only 26 inch carbon rims I think you are likely to find would originate on Ali Express. Carbon is strong, but on a general level does not withstand abrasion well. So, in rim brake form, is not really a good match for gritty mountain bike uses unless you also like wheel building as a hobby.
The only 26 inch carbon rim from a reputable company that I can think of would be the "Coup" from We Are One Composites. But, as above; You will not find a rim braked version.
I'm keen to see others suggestions because I too, have wondered if an aluminum tracked carbon rim in 26 inch form exists. There are ancient Spinergy's obviously. But for equally obvious reasons they are not suitable for mountain biking.
Good luck on your search.
Thread status: Subscribed.
There is also:
571
584
590, (sometimes marked as 591)
597
599
None of which (except 584) you will probably encounter if the bike was made in the last 30 years or so.
The only 26 inch carbon rims I think you are likely to find would originate on Ali Express. Carbon is strong, but on a general level does not withstand abrasion well. So, in rim brake form, is not really a good match for gritty mountain bike uses unless you also like wheel building as a hobby.
The only 26 inch carbon rim from a reputable company that I can think of would be the "Coup" from We Are One Composites. But, as above; You will not find a rim braked version.
I'm keen to see others suggestions because I too, have wondered if an aluminum tracked carbon rim in 26 inch form exists. There are ancient Spinergy's obviously. But for equally obvious reasons they are not suitable for mountain biking.
Good luck on your search.
Thread status: Subscribed.
Last edited by base2; 10-07-22 at 09:05 AM.
#5
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Ah, yes. It is a 26 inch MTB frame. I do not do any true offroad, downhill, or off gravel trail riding, so the abrasion is not a concern. 50% road and 50% finely packed, maintained, gravel path riding. I checked Ali express. I couldnt find anything there.
#6
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
If a 26 inch doesn't exist, a 27er/650B would work as well. And yes, i have plenty of room. I fitted my wife's 700c wheels(with 700x32 tires) on the bike with no issues.
#7
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Quality Bicycle Products, the largest wholesale bike parts distributor in the country if not the world lists precisely zero 26" carbon wheels in the over 2000 wheels they sell. This single fact tells me you're going to have a very hard time finding what you're looking for.
Likes For cxwrench:
#8
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,930
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,696 Times
in
976 Posts
Carbon rim brake wheels for mountain bikes isn't a thing. By the time carbon rims came into use mountain bikes were all using disc brakes
Likes For alcjphil:
#9
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,930
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,696 Times
in
976 Posts
Did you check if the brakes would work with 700c wheels?
#10
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
#11
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
I doubt that there is a current 26" carbon rim brake mtb wheel being made, but they are available on the used, or pre-owned if that sounds better, market.
eBay is your friend to get an idea of what is out there...
https://www.ebay.com/sch/i.html?_fro...e&_dcat=177830
John
eBay is your friend to get an idea of what is out there...
https://www.ebay.com/sch/i.html?_fro...e&_dcat=177830
John
#12
Dirty Heathen
Join Date: Oct 2015
Location: MC-778, 6250 fsw
Posts: 2,182
Bikes: 1997 Cannondale, 1976 Bridgestone, 1998 SoftRide, 1989 Klein, 1989 Black Lightning #0033
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 889 Post(s)
Liked 906 Times
in
534 Posts
Why the need for carbon? Since it’s a rim-brake 26er, it’s either an inexpensive bike, or old, since high-end 26ers went disc brake about Y2K.
Only carbon, rim-brake 26” wheels I can come up with are the old HED JET XC wheels from the 1990’s.
Seems a bit excessive for an up-cycled path bike
Only carbon, rim-brake 26” wheels I can come up with are the old HED JET XC wheels from the 1990’s.
Seems a bit excessive for an up-cycled path bike
Likes For Ironfish653:
#13
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
They have vbrake extender adapters that allow for this very thing. They also make vbrakes with extra long adjustment. Again going to a 700c or 27er is not a problem.
#14
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I have actually found a custom wheel manufacturer that make a 26 inch carbon wheel with both rim and disc brake capabilities. The company is called lightbicycle and they will build basically anything you want. The total weight on the wheelset is only 1250grams. And I can get them for only $650.
#15
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
Good for you.
John
John
#16
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
Well then...I for one will be able to sleep tonight.
Likes For cxwrench:
#17
Senior Member
Join Date: Sep 2020
Location: Scotland
Posts: 503
Bikes: Way too many
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 900 Post(s)
Liked 607 Times
in
364 Posts
I have actually found a custom wheel manufacturer that make a 26 inch carbon wheel with both rim and disc brake capabilities. The company is called lightbicycle and they will build basically anything you want. The total weight on the wheelset is only 1250grams. And I can get them for only $650.
Sticking carbon wheels on an old mountain bike for path use just seems pointless. You're not going to be gaining much in comfort because you're not doing anything rough, and you're not going to be going much faster because the rest of the bike is still an old mtb.
Personally I'd just stick whatever wheel you can find that's the right size, preferably a lightly uses aluminium one, and then go ride.
#20
Senior Member
Join Date: Jan 2010
Posts: 39,246
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18420 Post(s)
Liked 15,564 Times
in
7,333 Posts
Maybe this thread should be merged with the biggest waste of money thread.
Likes For indyfabz:
#21
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,806
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1944 Post(s)
Liked 2,164 Times
in
1,323 Posts
I’ll reserve waste of money judgment until I know the frame. An old Moots, Fat Chance, Merlin, or Race Lite can command some dollars these days if in excellent original condition.
As for wheels, Rhyno Lites on lower end hubs are probably running $200.
None of this changes that it is still an older 26er, but value on almost anything vintage has nothing to do with comparable performance to modern standards. If it did, the classic car market would collapse.
John
As for wheels, Rhyno Lites on lower end hubs are probably running $200.
None of this changes that it is still an older 26er, but value on almost anything vintage has nothing to do with comparable performance to modern standards. If it did, the classic car market would collapse.
John
Likes For 70sSanO:
#22
Senior Member
Join Date: Jun 2019
Posts: 939
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 539 Post(s)
Liked 466 Times
in
259 Posts
I have a lightweight aluminum rigid frame MTB with 10 speed Deore and 26" wheels that I would like carbon wheels on if I could convince myself they wouldn't explode on me during a fast downhill road because I had damaged them unknowingly days before. I did spring for Compass tires though.
#23
Senior Member
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767
Bikes: lots
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times
in
1,489 Posts
I have a lightweight aluminum rigid frame MTB with 10 speed Deore and 26" wheels that I would like carbon wheels on if I could convince myself they wouldn't explode on me during a fast downhill road because I had damaged them unknowingly days before. I did spring for Compass tires though.
Likes For cxwrench:
#24
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
It's amazing the assumptions people make on here along with the snarkiness. 70san0 provided the only decent response. 70san0, the frame is a lightweight aluminum frame, and the geometry fits me like a glove. It weighs around 1500 grams. It is a triace (yes I know a China bike), and its only around 8 years old. The Frame is very strong as well and I love the ride and feel of it. I've put 1000s of miles on this bike. With the new wheels, the total weight of the bike will come in around 14 pounds. It already has carbon fork, carbon seat stay, integrated carbon handle bars, and it's a 1x9 with a modern deore groupset. Everything but the wheels are modern and up to date.
Likes For mental8y123:
#25
Newbie
Thread Starter
Join Date: Sep 2022
Posts: 14
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
They are not an obscure wheel builder. They have gained an excellent reputation, their customer service and warranties are outstanding, and master wheel builders have rated these wheels any where from great to nearly flawless. Especially at their price points, and that fact that they custom build every wheel to your specifications, and they only use well known hubs, spokes, and nipples, along with top notch carbon builds. Not sure where your getting your information from. God forbid a company that you haven't heard of cant possibly make a good product.