Huffy AeroWind Rat Rod
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
Huffy AeroWind Rat Rod
I'm starting this thread as a declaration of intent -- something to hold me accountable and get this project moving.
Some years ago - never mind how long precisely - having too much money in my purse, and nothing particular to interest me in the garage, I thought I would buy a Huffy AeroWind frameset that I came across on Craigslist.
This was before the days of the glorious Huffente and I'm not even sure what my original intentions were, but I soon decided that I would try to build it up with good components, the sort of components that I would use on a nicer frame. Then the Huffente happened, and I thought do myself, "Well, dang. I can't compete with that." And so the project got shelved.
But I didn't actually put the thing away. (Anyone who has seen my garage will have guessed that much ) It sat out beside a bookcase in the garage where I'd see it regularly and think "I should do something with that." Over time something like a plan has emerged.
I intend to build it as described above with good parts. I'm a resto-mod kind of guy, so they won't be period correct. I'm thinking Shimano 10-speed, probably a mix of 105 and Tiagra, because that's what I have on hand. The focus will be on functionality with nothing done for aesthetics. I don't intend to go out of my way to make it ugly, but it will be. Mismatched colors, silver and black components intermingling, a threadless stem adapter, whatever it takes. But I will be pursuing comfort and functionality to the full extent that the frame's dimensions allow.
...in which Doris gets her oats
I kicked it off yesterday by removing the bottom bracket and headset. No pictures today, but many things were learned.
I was pleasantly surprised that the bottom bracket came out without a fight. There was some sort of locknut arrangement holding the spindle in place. I didn't have a thin enough wrench to hold the inner flats while loosening the locknut, but amazingly I was able to get it off just by holding the splines of the spindle with a pair of pliers. With the spindle removed, a few taps on a screwdriver knocked out the cups. I've got an adapter on hand that will let me install a BSA threaded bottom bracket. I'm leaning towards an FSA Gossamer triple with external bearing bottom bracket.
The headset was a different matter. It had an aluminum locknut that was pretty stuck. I used my biggest adjustable wrench and held a wheel for leverage but it wouldn't budge. So I soaked it with penetrating oil and waited. A few hours later, I got it to move. Unless my eyes are deceiving me, I ovalized the locknut in the process, but it came off.
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
Some years ago - never mind how long precisely - having too much money in my purse, and nothing particular to interest me in the garage, I thought I would buy a Huffy AeroWind frameset that I came across on Craigslist.
This was before the days of the glorious Huffente and I'm not even sure what my original intentions were, but I soon decided that I would try to build it up with good components, the sort of components that I would use on a nicer frame. Then the Huffente happened, and I thought do myself, "Well, dang. I can't compete with that." And so the project got shelved.
But I didn't actually put the thing away. (Anyone who has seen my garage will have guessed that much ) It sat out beside a bookcase in the garage where I'd see it regularly and think "I should do something with that." Over time something like a plan has emerged.
I intend to build it as described above with good parts. I'm a resto-mod kind of guy, so they won't be period correct. I'm thinking Shimano 10-speed, probably a mix of 105 and Tiagra, because that's what I have on hand. The focus will be on functionality with nothing done for aesthetics. I don't intend to go out of my way to make it ugly, but it will be. Mismatched colors, silver and black components intermingling, a threadless stem adapter, whatever it takes. But I will be pursuing comfort and functionality to the full extent that the frame's dimensions allow.
...in which Doris gets her oats
I kicked it off yesterday by removing the bottom bracket and headset. No pictures today, but many things were learned.
I was pleasantly surprised that the bottom bracket came out without a fight. There was some sort of locknut arrangement holding the spindle in place. I didn't have a thin enough wrench to hold the inner flats while loosening the locknut, but amazingly I was able to get it off just by holding the splines of the spindle with a pair of pliers. With the spindle removed, a few taps on a screwdriver knocked out the cups. I've got an adapter on hand that will let me install a BSA threaded bottom bracket. I'm leaning towards an FSA Gossamer triple with external bearing bottom bracket.
The headset was a different matter. It had an aluminum locknut that was pretty stuck. I used my biggest adjustable wrench and held a wheel for leverage but it wouldn't budge. So I soaked it with penetrating oil and waited. A few hours later, I got it to move. Unless my eyes are deceiving me, I ovalized the locknut in the process, but it came off.
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
__________________
My Bikes
My Bikes
#2
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
And, of course this is required for any Huffy AeroWind thread
__________________
My Bikes
My Bikes
Likes For Andy_K:
#3
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,806
Bikes: It's complicated.
Liked 6,174 Times
in
2,402 Posts
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#4
Francophile
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,576
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 680 Times
in
333 Posts
An excellent start. Following with interest!
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#5
You better measure the bottom bracket ID too. It looks kind of strangely oversized like the head tube.
#6
”Available at Toys R Us.”
That says it all.
There’s one on CL here for $35 but I’m not tempted. Let me know if you need any parts from it.
That says it all.
There’s one on CL here for $35 but I’m not tempted. Let me know if you need any parts from it.
__________________
72 Fuji Finest 72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
72 Fuji Finest 72+76 Super Course, 74 P-10+ 79 Tandem Paramounts, 84 Raleigh Alyeska, 84 Voyageur SP, 85 Miyata Sport 10 mixte and a queue
Likes For Schreck83:
#7
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,570
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,596 Times
in
2,259 Posts
Whoop whoop! Another horror thread has come! Awesome!!!!
I think Dura Ace AX, modified through trickery to support a 130 spaced, 10 speed Spynergy 4 spoke wheel, with Winspace integrated aero carbon bar-stem! It should be pretty cheap...
I think Dura Ace AX, modified through trickery to support a 130 spaced, 10 speed Spynergy 4 spoke wheel, with Winspace integrated aero carbon bar-stem! It should be pretty cheap...
I'm starting this thread as a declaration of intent -- something to hold me accountable and get this project moving.
Some years ago - never mind how long precisely - having too much money in my purse, and nothing particular to interest me in the garage, I thought I would buy a Huffy AeroWind frameset that I came across on Craigslist.
This was before the days of the glorious Huffente and I'm not even sure what my original intentions were, but I soon decided that I would try to build it up with good components, the sort of components that I would use on a nicer frame. Then the Huffente happened, and I thought do myself, "Well, dang. I can't compete with that." And so the project got shelved.
But I didn't actually put the thing away. (Anyone who has seen my garage will have guessed that much ) It sat out beside a bookcase in the garage where I'd see it regularly and think "I should do something with that." Over time something like a plan has emerged.
I intend to build it as described above with good parts. I'm a resto-mod kind of guy, so they won't be period correct. I'm thinking Shimano 10-speed, probably a mix of 105 and Tiagra, because that's what I have on hand. The focus will be on functionality with nothing done for aesthetics. I don't intend to go out of my way to make it ugly, but it will be. Mismatched colors, silver and black components intermingling, a threadless stem adapter, whatever it takes. But I will be pursuing comfort and functionality to the full extent that the frame's dimensions allow.
...in which Doris gets her oats
I kicked it off yesterday by removing the bottom bracket and headset. No pictures today, but many things were learned.
I was pleasantly surprised that the bottom bracket came out without a fight. There was some sort of locknut arrangement holding the spindle in place. I didn't have a thin enough wrench to hold the inner flats while loosening the locknut, but amazingly I was able to get it off just by holding the splines of the spindle with a pair of pliers. With the spindle removed, a few taps on a screwdriver knocked out the cups. I've got an adapter on hand that will let me install a BSA threaded bottom bracket. I'm leaning towards an FSA Gossamer triple with external bearing bottom bracket.
The headset was a different matter. It had an aluminum locknut that was pretty stuck. I used my biggest adjustable wrench and held a wheel for leverage but it wouldn't budge. So I soaked it with penetrating oil and waited. A few hours later, I got it to move. Unless my eyes are deceiving me, I ovalized the locknut in the process, but it came off.
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
Some years ago - never mind how long precisely - having too much money in my purse, and nothing particular to interest me in the garage, I thought I would buy a Huffy AeroWind frameset that I came across on Craigslist.
This was before the days of the glorious Huffente and I'm not even sure what my original intentions were, but I soon decided that I would try to build it up with good components, the sort of components that I would use on a nicer frame. Then the Huffente happened, and I thought do myself, "Well, dang. I can't compete with that." And so the project got shelved.
But I didn't actually put the thing away. (Anyone who has seen my garage will have guessed that much ) It sat out beside a bookcase in the garage where I'd see it regularly and think "I should do something with that." Over time something like a plan has emerged.
I intend to build it as described above with good parts. I'm a resto-mod kind of guy, so they won't be period correct. I'm thinking Shimano 10-speed, probably a mix of 105 and Tiagra, because that's what I have on hand. The focus will be on functionality with nothing done for aesthetics. I don't intend to go out of my way to make it ugly, but it will be. Mismatched colors, silver and black components intermingling, a threadless stem adapter, whatever it takes. But I will be pursuing comfort and functionality to the full extent that the frame's dimensions allow.
...in which Doris gets her oats
I kicked it off yesterday by removing the bottom bracket and headset. No pictures today, but many things were learned.
I was pleasantly surprised that the bottom bracket came out without a fight. There was some sort of locknut arrangement holding the spindle in place. I didn't have a thin enough wrench to hold the inner flats while loosening the locknut, but amazingly I was able to get it off just by holding the splines of the spindle with a pair of pliers. With the spindle removed, a few taps on a screwdriver knocked out the cups. I've got an adapter on hand that will let me install a BSA threaded bottom bracket. I'm leaning towards an FSA Gossamer triple with external bearing bottom bracket.
The headset was a different matter. It had an aluminum locknut that was pretty stuck. I used my biggest adjustable wrench and held a wheel for leverage but it wouldn't budge. So I soaked it with penetrating oil and waited. A few hours later, I got it to move. Unless my eyes are deceiving me, I ovalized the locknut in the process, but it came off.
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#8
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,587
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Liked 737 Times
in
417 Posts
Since it’s only a frame, it must not have come with the Huffy aero brake calipers. I would assume that you would spring for the Campy ones that are similar looking.
#9
Senior Member
Once built, you definitely need to re-enact that promo video, Andy. Where might that bridge be?
Likes For nlerner:
#10
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,570
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,596 Times
in
2,259 Posts
Probably collapsed from the weight of the Huffy after the shoot.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
#11
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
Yeah, it's a BMX size, 50.8mm. Fortunately, I was able to find an adapter on the cheap.
__________________
My Bikes
My Bikes
#12
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
Nah. I'm ignoring their attempts at aero. Not looking for anything fancy in the components, just functional.
__________________
My Bikes
My Bikes
#13
Senior Member
Join Date: Aug 2010
Location: south kansas america
Posts: 1,927
Bikes: too many
Liked 256 Times
in
149 Posts
Let us know how it goes.
Likes For uncle uncle:
#14
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,570
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,596 Times
in
2,259 Posts
Yeah, I don’t blame you. I was just kidding in an AMCO sort of way!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#15
I think you’ve found the ‘Ultimate Riding Experience’.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#16
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,224
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Liked 1,115 Times
in
719 Posts
The headset was a different matter. It had an aluminum locknut that was pretty stuck. I used my biggest adjustable wrench and held a wheel for leverage but it wouldn't budge. So I soaked it with penetrating oil and waited. A few hours later, I got it to move. Unless my eyes are deceiving me, I ovalized the locknut in the process, but it came off.
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
That left a knurled top race. I couldn't find my vice grips and pliers didn't provide sufficient leverage, but it was late and I wasn't going to sleep without seeing the thing done. I ended up using a long woodworking clamp to hold the race while I rotated the fork to unthread it Success.
Here's where it gets interesting. First, the top cup came out with the race. I guess the clamp was holding it too and it wasn't seated very tightly. The head tube measures 33 mm (not 32.6 mind you 33). What's really curious is the steerer. It has no raised edge for the crown race. The crown race was just sitting there loose with a fair bit of play. [MENTION=133054]AdventureManCO[/MENTION], do you know if that's normal for Huffy?
At this point I'm thinking I'll try to salvage the original headset. If I can shim the race into place, clean up the bearings, salvage the locknut and get the thing to turn smoothly, I'll call it a win. If not, I'll be looking for some other solution.
More to follow as it happens....
Wait..... that was intended to be a snide remark, but it actually could make this Aerowind a better riding and less cumbersome bike. And solve the sloppy crown race issue.
Likes For Velo Mule:
#17
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
I think [MENTION=381793]gugie[/MENTION] knows where it is. Somewhere in California. Probably on the Tourica route.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#18
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,806
Bikes: It's complicated.
Liked 6,174 Times
in
2,402 Posts
Bixby Bridge, Big Sur Many a commercial filmed on it
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#19
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
The Depoe Bay Bridge in Oregon might be a serviceable fill-in.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#20
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 3,132
Bikes: Gängl, Trek 938, Raleigh Professional, Paramount, Allez, Guerciotti, Specialized Stumpjumper, Trek 750, Miyata 1000 < Huffy
Liked 4,008 Times
in
1,618 Posts
I can't answer any important questions just yet. I'm too busy crying tears of joy.
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#21
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
I got a little bit of work done on the headset tonight, and now I have pictures to share. Let me start with the visual reference of what I'm working with.
Following the classic rat rod tradition, I don't intend to do anything about the rust, apart from scraping it away from the threads. I guarantee it will not cause structural damage within the expected service life of this bike. On close inspection, there may be a slight taper at the bottom of the steerer, but that may just be deformation. The crown race itself has a lot of internal taper. It's downright conical. I honestly have no idea what the design is here. The good new is that the chrome is in great shape!
Does this look round to you? The threaded parts came unscrewed so it must not be too far off, but it looks kind of ovoid to me.
A test fit with the stem adapter seems to confirm, but I've definitely seen worse.
The pieces of the headset cleaned up reasonably well. As is typical for a bike that has seen more neglect than abuse, there's no pitting or other serious damage.
The fork ends have the usual 95-ish mm spacing. The good news is this gives me motivation to break out my fork tools.
No, no, no. This will not do.
Better? You'll never see an AeroWind with better alignment, and I don't mean that in a good way.
(I probably should have prefaced this with a trigger warning for any OCD readers.)
In case you are concerned that I'm not treating this project with the dignity it deserves, let me put your mind at ease by showing you the precision shim I used for the crown race.
With everything cleaned and greased, I was ready to put it back together. Unfortunately, my woodworking vise wasn't strong enough to get the top race back on.
I'm going to need to find the vice grips before I can go any further. I can't imagine how they would get lost in my garage.
Following the classic rat rod tradition, I don't intend to do anything about the rust, apart from scraping it away from the threads. I guarantee it will not cause structural damage within the expected service life of this bike. On close inspection, there may be a slight taper at the bottom of the steerer, but that may just be deformation. The crown race itself has a lot of internal taper. It's downright conical. I honestly have no idea what the design is here. The good new is that the chrome is in great shape!
Does this look round to you? The threaded parts came unscrewed so it must not be too far off, but it looks kind of ovoid to me.
A test fit with the stem adapter seems to confirm, but I've definitely seen worse.
The pieces of the headset cleaned up reasonably well. As is typical for a bike that has seen more neglect than abuse, there's no pitting or other serious damage.
The fork ends have the usual 95-ish mm spacing. The good news is this gives me motivation to break out my fork tools.
No, no, no. This will not do.
Better? You'll never see an AeroWind with better alignment, and I don't mean that in a good way.
(I probably should have prefaced this with a trigger warning for any OCD readers.)
In case you are concerned that I'm not treating this project with the dignity it deserves, let me put your mind at ease by showing you the precision shim I used for the crown race.
With everything cleaned and greased, I was ready to put it back together. Unfortunately, my woodworking vise wasn't strong enough to get the top race back on.
I'm going to need to find the vice grips before I can go any further. I can't imagine how they would get lost in my garage.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#22
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
Found 'em! They were put away in a logical place, which accounts for the difficulty locating them. This is why I leave things out.
There's a bit of a gap between the upper cup and its race, but if I tighten it down any more it starts binding, so I guess this is the way it's meant to be. I triple checked that I didn't have either set of bearings in upside down.
The top race was a struggle through every single turn. It felt like I was cutting new threads as I went, and maybe I was. I'm very confident it will hold its adjustment. The lock nut went on without a problem. The damage you see to the lock nut is from the removal process.
There's a bit of a gap between the upper cup and its race, but if I tighten it down any more it starts binding, so I guess this is the way it's meant to be. I triple checked that I didn't have either set of bearings in upside down.
The top race was a struggle through every single turn. It felt like I was cutting new threads as I went, and maybe I was. I'm very confident it will hold its adjustment. The lock nut went on without a problem. The damage you see to the lock nut is from the removal process.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#23
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,570
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,596 Times
in
2,259 Posts
Found 'em! They were put away in a logical place, which accounts for the difficulty locating them. This is why I leave things out.
There's a bit of a gap between the upper cup and its race, but if I tighten it down any more it starts binding, so I guess this is the way it's meant to be. I triple checked that I didn't have either set of bearings in upside down.
The top race was a struggle through every single turn. It felt like I was cutting new threads as I went, and maybe I was. I'm very confident it will hold its adjustment. The lock nut went on without a problem. The damage you see to the lock nut is from the removal process.
There's a bit of a gap between the upper cup and its race, but if I tighten it down any more it starts binding, so I guess this is the way it's meant to be. I triple checked that I didn't have either set of bearings in upside down.
The top race was a struggle through every single turn. It felt like I was cutting new threads as I went, and maybe I was. I'm very confident it will hold its adjustment. The lock nut went on without a problem. The damage you see to the lock nut is from the removal process.
Second, is my guess is that the ovalization of the steering tube was a purposeful attempt to properly misalign the headset at the factory...
When a SN is that long, quality control is not considered...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
Likes For jdawginsc:
Likes For thinktubes:
#25
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,964
Bikes: Yes
Liked 4,301 Times
in
1,584 Posts
It’s important to have the right tools available when you need them. Sadly, this one doesn’t even work correctly. The lava sticks to the side. It was my daughter’s and I took it into the garage to see if I could fix it. I couldn’t and just haven’t bothered to dispose it. I guess I’m waiting for Ridwell to make lava lamps their category of the month.
__________________
My Bikes
My Bikes
Likes For Andy_K: