Shimano 600 EX Arabesque- Spacers additive manufacturing
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Bastrop Texas
Posts: 4,480
Bikes: Univega, Peu P6, Peu PR-10, Ted Williams, Peu UO-8, Peu UO-18 Mixte, Peu Dolomites
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 966 Post(s)
Liked 1,629 Times
in
1,045 Posts
Shimano 600 EX Arabesque- Spacers additive manufacturing
Here is a 3D print of the Boss Cover Spacer and the Wing Nut Spacer used on the Down Tube Friction Shifters of the Shimano 600 EX Arabesque. My old ones finally gave it up and became so brittle with age they broke. These are a pretty close copy. The design is my own. You can download the .stl files here.
https://www.youmagine.com/designs/sh...hifter-spacers
Note: I had allot of trouble posting this thread do to problems in the Title. Thank you unterhausen for fixing the problem...
https://www.youmagine.com/designs/sh...hifter-spacers
Note: I had allot of trouble posting this thread do to problems in the Title. Thank you unterhausen for fixing the problem...
__________________
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
No matter where you're at... There you are... Δf:=f(1/2)-f(-1/2)
Last edited by zandoval; 07-06-22 at 12:23 AM.
#2
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,399
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,699 Times
in
2,519 Posts
There is a bug in the forum software where you can't end the name of a thread with the word "print" because it sets it up to be printed.
I changed the name of the thread
I changed the name of the thread