VO Diagonale 650b Rim Question
#1
Senior Member
Thread Starter
VO Diagonale 650b Rim Question
Building up some wheels. Looking at which rim tape size to use. Velux has 16mm and 22 mm. The inner wall to wall space is about 18 mm. These look really close to CR18 Sun rims, which I think I used 16mm. Wish I had purchased a second set of these when they went on sale!
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
Double walled/box section rims? Spoke hole access hole size? These days one has to ask... tubed tires? Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Senior Member
Thread Starter
Double wall, hole size about 8-9mm, tubes.
#4
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,094
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4209 Post(s)
Liked 3,875 Times
in
2,315 Posts
Generally wide as possible is better. As long as the strip covers the spoke holes, doesn't creep when under pressure to expose the edges of the nipple access holes, doesn't ride up and onto the bead seat shelf and you will be OK. With today's internal rim shapes it's unusual to need a 20+mm wide strip. But the proof in in the fitting. Rim strips are so cheap to buy though so why not get both and be sure. Andy
__________________
AndrewRStewart
AndrewRStewart
#5
Senior Member
Thread Starter
Found some old rolls and stuck them in the rim. 16mm it is.