Difficulty finding replacement for BB-UN300 D-NL
#1
Newbie
Thread Starter
Join Date: Feb 2024
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
1 Post
Difficulty finding replacement for BB-UN300 D-NL
Hello everyone,
I am new to working on my own bike so please forgive any ignorance on my part.
i am trying to find a replacement for my bottom bracket for my bianchi Torino hybrid bike.
the BB that I removed is a BB-UN300 D-NL
My bottom bracket shell is 68mm and the spindle is 123mm (I guess that means it is 122.5mm?)
he drive side of the spindle is longer than the non drive side.
does anyone know if this bottom bracket can be purchased anywhere or does anyone know of any compatible replacements?
most of the ones I see online are LL123 and D-NL
thanks in advance to anyone who can give me
some direction.
I am new to working on my own bike so please forgive any ignorance on my part.
i am trying to find a replacement for my bottom bracket for my bianchi Torino hybrid bike.
the BB that I removed is a BB-UN300 D-NL
My bottom bracket shell is 68mm and the spindle is 123mm (I guess that means it is 122.5mm?)
he drive side of the spindle is longer than the non drive side.
does anyone know if this bottom bracket can be purchased anywhere or does anyone know of any compatible replacements?
most of the ones I see online are LL123 and D-NL
thanks in advance to anyone who can give me
some direction.
#2
Really Old Senior Member
You should be good- From Shimano 2013-14
#3
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,627
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3890 Post(s)
Liked 6,490 Times
in
3,213 Posts
Likes For SurferRosa:
#4
Senior Member
Hello everyone,
I am new to working on my own bike so please forgive any ignorance on my part.
i am trying to find a replacement for my bottom bracket for my bianchi Torino hybrid bike.
the BB that I removed is a BB-UN300 D-NL
My bottom bracket shell is 68mm and the spindle is 123mm (I guess that means it is 122.5mm?)
he drive side of the spindle is longer than the non drive side.
does anyone know if this bottom bracket can be purchased anywhere or does anyone know of any compatible replacements?
most of the ones I see online are LL123 and D-NL
thanks in advance to anyone who can give me
some direction.
I am new to working on my own bike so please forgive any ignorance on my part.
i am trying to find a replacement for my bottom bracket for my bianchi Torino hybrid bike.
the BB that I removed is a BB-UN300 D-NL
My bottom bracket shell is 68mm and the spindle is 123mm (I guess that means it is 122.5mm?)
he drive side of the spindle is longer than the non drive side.
does anyone know if this bottom bracket can be purchased anywhere or does anyone know of any compatible replacements?
most of the ones I see online are LL123 and D-NL
thanks in advance to anyone who can give me
some direction.
Just get the same model, UN300 in D-NL length with the correct BB shell width (68 or 73). Not sure of the dimensions of the LL123.
Avoid the model with E or K in the model #, those are designed for E bracket mounted front derailleur and chain case frames.
Other brand of bottom brackets of the same length would also be very similar in left &right lengths. A mm or 2 won't matter, unless your frame has clearance issues with the chainring or chainstay (very uncommon if the current BB is 'stock' on the bike.
#5
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,664
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1948 Post(s)
Liked 1,472 Times
in
1,020 Posts
Might as well buy a Made in Japan one if you are going through the trouble of replacing the BB.
Tange LN-3922 Bottom Bracket | (benscycle.com)
Tange LN-3922 Bottom Bracket | (benscycle.com)