Bikes I should look at?
#1
...
Thread Starter
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,516
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 1,590 Times
in
739 Posts
Bikes I should look at?
Social Security checks started arriving and I'm going to buy a modern Di2 CF bike. I have a budget of ~ $5K. Still flipping between race and endurance because I like both. I need low gearing, lots of hills at 12% or greater.
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,992
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6196 Post(s)
Liked 4,810 Times
in
3,318 Posts
Race fit road bikes are every bit as endurable for long rides as a endurance bike. What you get with a race fit is a more aero position that lets you accumulate energy savings so you can sprint faster at the end or ride longer.
However, if you are one that for some reason a race fit position doesn't suit you well and causes you some discomfort, then the annoyance of that will far outweigh the aero benefits. Especially on long rides.
You should check out all the brand name bikes sold in your area. Down here Specialized, Trek, Giant and Cannondale are the big common names with some Scott's being found in one shops inventory occasionally along with an occasional BMC. Though all the shops can get you many of the somewhat elite sounding names common in Europe, but they seldom have any in stock to try.
However, if you are one that for some reason a race fit position doesn't suit you well and causes you some discomfort, then the annoyance of that will far outweigh the aero benefits. Especially on long rides.
You should check out all the brand name bikes sold in your area. Down here Specialized, Trek, Giant and Cannondale are the big common names with some Scott's being found in one shops inventory occasionally along with an occasional BMC. Though all the shops can get you many of the somewhat elite sounding names common in Europe, but they seldom have any in stock to try.
#3
Newbie
Join Date: May 2020
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Social Security checks started arriving and I'm going to buy a modern Di2 CF bike. I have a budget of ~ $5K. Still flipping between race and endurance because I like both. I need low gearing, lots of hills at 12% or greater.
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
There are many nice bikes for what you are talking about wanting. Orbea, Scott, Trek, Specialized, Cannondale, Felt, all make really nice bikes.
#4
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
Social Security checks started arriving and I'm going to buy a modern Di2 CF bike. I have a budget of ~ $5K. Still flipping between race and endurance because I like both. I need low gearing, lots of hills at 12% or greater.
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
Looking at the Trek Domane and Emonda plus the Canyon Endurace and Aeroad. I currently ride a Centurion Prestige 2 x 10 in 62cm. The main reason for looking now is the coming wave of inflation, I'd like to do this before the same bikes are $7K. Test riding is not easy with the current availability for many of the good road bikes, so I do like Canyons return policy.
What other bikes should I look at?
Thanks in advance!
#5
Senior Member
Join Date: Nov 2018
Location: Redmond, WA & Bangkok, Thailand
Posts: 566
Bikes: 1999 Giant ATX MTB, 2002 Lemond Zurich, 2018 Fuji Transonic 2.3, 2019 Specialized Tarmac Disc Expert
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 395 Times
in
227 Posts
I really like my 2019 Specialized Tarmac Disc Expert. It isn't Di2. The current 2019 model I have isn't around anymore. They upgraded it to a Di2 bike and of course the price shot up a lot too. I bought it in Oregon at a LBS when it went on a 10% sale. That plus no sales tax in Oregon knocked off a heavy amount I would have had to pay in Washington State.
#6
...
Thread Starter
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,516
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 1,590 Times
in
739 Posts
First world struggles continue. Tried a Scott and a BMC this weekend. No flies on either.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
Last edited by BTinNYC; 05-30-22 at 05:11 AM.
#8
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
I am shopping endurance bikes at this time, too. Have a look at the Cervelo Caledonia Di2.....I think it is 5K
Maybe the Cannondale Synapse with Di2 as well.
Maybe the Cannondale Synapse with Di2 as well.
#9
Senior Member
Join Date: Nov 2018
Location: Redmond, WA & Bangkok, Thailand
Posts: 566
Bikes: 1999 Giant ATX MTB, 2002 Lemond Zurich, 2018 Fuji Transonic 2.3, 2019 Specialized Tarmac Disc Expert
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 171 Post(s)
Liked 395 Times
in
227 Posts
First world struggles continue. Tried a Scott and a BMC this weekend. No flies on either.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
#10
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,687
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1126 Post(s)
Liked 253 Times
in
204 Posts
For that kind of money you could get a lifetime bike made of titanium. Lynskey has the R500 with disk brakes and Ultegra Di2 for only $500 over your budget. Personally I don't like electronic shifting because the batteries only last 3 to 5 years and cost at least $85 to replace, it's just another maintenance issue I don't want to be paying for; not to mention you have to plug the stuff in every so many miles, plus you save a lot of money on a new bike if you go with mechanical. Mechanical derailleurs are much simpler to work on, so much so you can do it at home or even on the road and not have to buy different tools, and electronic breakdown on the road you won't be able to fix it; biggest problem is water for electronic derailleurs, water causes a complete failure of the component where it cannot be fixed but has to be replaced, this problem is so annoying a lot riders switched back to mechanical. Like high tech cars, when something goes bad 10 years or so down the road you may not be able to find a part to fix it, that means an all new system which means large amounts of cash! This issue with finding parts is not a problem with mechanical systems. As you know, titanium will far out last carbon fiber, so if this is your retirement bike you want it to last a lifetime, which is why I bought a Lynskey, with 105 components to save money of course, and for the last 9 years it's worked flawlessly.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
Get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
Be wise with your money, like you said things are going to get tougher with inflation.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
Get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
Be wise with your money, like you said things are going to get tougher with inflation.
#11
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
Ti frames crack.
Likes For GhostRider62:
#12
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
for that kind of money you could get a lifetime bike made of titanium. Lynskey has the r500 with disk brakes and ultegra di2 for only $500 over your budget. Personally i don't like electronic shifting because the batteries only last 3 to 5 years and cost at least $85 to replace, it's just another maintenance issue i don't want to be paying for; not to mention you have to plug the stuff in every so many miles, plus you save a lot of money on a new bike if you go with mechanical. Mechanical derailleurs are much simpler to work on, so much so you can do it at home or even on the road and not have to buy different tools, and electronic breakdown on the road you won't be able to fix it; biggest problem is water for electronic derailleurs, water causes a complete failure of the component where it cannot be fixed but has to be replaced, this problem is so annoying a lot riders switched back to mechanical. Like high tech cars, when something goes bad 10 years or so down the road you may not be able to find a part to fix it, that means an all new system which means large amounts of cash! This issue with finding parts is not a problem with mechanical systems. As you know, titanium will far out last carbon fiber, so if this is your retirement bike you want it to last a lifetime, which is why i bought a lynskey, with 105 components to save money of course, and for the last 9 years it's worked flawlessly.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
be wise with your money, like you said things are going to get tougher with inflation.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
be wise with your money, like you said things are going to get tougher with inflation.
Likes For PeteHski:
#13
Senior Member
Join Date: May 2021
Posts: 8,442
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 4413 Post(s)
Liked 4,865 Times
in
3,011 Posts
First world struggles continue. Tried a Scott and a BMC this weekend. No flies on either.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
I'm leaning hard towards the Canyon Endurace SL 8 Aero because of value and availability. This bike comes with power meter for less than competitor's bikes without a PM, and they have my size in stock.
Big negative is the hideous green color, which puts practicality versus shallow fashion sense to a real test. Forest green. Ick.
I've ridden it for just over 1000 km now and really happy with the ride and build quality. It's a fast and comfortable bike. I posted the fastest overall 100 mile time on a local hilly Sportive last weekend on it, so no complaints there! The spilt seatpost and endurance carbon bars are both very comfortable too. Loving the DT Swiss wheel set and 30 mm tubeless Contis too. Early days still, but no complaints here.
Last edited by PeteHski; 05-30-22 at 04:40 PM.
Likes For PeteHski:
#14
Senior Member
Join Date: Sep 2019
Location: Memphis 10
Posts: 193
Bikes: 2021 Canyon Endurace SL8, 2019 Cannondale Topstone Sora, 2002 Giant Yukon
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 148 Times
in
57 Posts
I have the Canyon Endurace CF 8 Di2 kinda threads the needle fit wise between endurance and race but does not have aero tubing
I have a size XS and there is a bit of toe overlap that my Gravel bike does not have.
I have a size XS and there is a bit of toe overlap that my Gravel bike does not have.
#15
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,687
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1126 Post(s)
Liked 253 Times
in
204 Posts
Right, like carbon fiber never does! LMAO. Cracks in Ti frames are rare, they had issues with earlier ti frames due to trying to make the metal to thin to reduce weight for selling points, that backfired as they did indeed cracked, modern ones rarely have issues unless they come directly from a China manufacture to your house.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
#16
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,473
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1743 Post(s)
Liked 1,281 Times
in
740 Posts
Take a look at the German brand Rose. They, like Canyon, sell direct to customer. A friend bought an AL Rose and likes it a lot. They also seem to be pretty light and at a good price.
https://www.rosebikes.com/
https://www.rosebikes.com/
#17
Senior Member
Join Date: Jul 2006
Location: Lebanon (Liberty Hill), CT
Posts: 8,473
Bikes: CAAD 12, MASI Gran Criterium S, Colnago World Cup CX & Guru steel
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1743 Post(s)
Liked 1,281 Times
in
740 Posts
Basso bikes are also pretty sweet and actually made in Italy. I was looking at them until I stumbled upon a GURU Photon at the Pro's Closet. Used not new. If it wasn't for that I'm sure I'd have a Basso by now.
https://bassobikes.com/en
https://bassobikes.com/en
#18
Senior Member
Join Date: Apr 2021
Posts: 4,083
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 2333 Post(s)
Liked 2,097 Times
in
1,314 Posts
Right, like carbon fiber never does! LMAO. Cracks in Ti frames are rare, they had issues with earlier ti frames due to trying to make the metal to thin to reduce weight for selling points, that backfired as they did indeed cracked, modern ones rarely have issues unless they come directly from a China manufacture to your house.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Titanium Strength - YouTube
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Titanium Strength - YouTube
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
Interesting about CF. I have three CF, two magnesium, and two steel bikes in the garage. I cannot feel the top tube give on any of them. I have had one steel tube break, one Mg weld go bad, and one CF seat tube get crushed by the airlines. None of them are lifetime frames. The steel was unrepairable at a reasonable cost. I have not found anyone yet to weld my Mg tube, and the carbon was expertly repaired and still lives. I've known many people who have had Ti welds go bad. Is it common? Maybe, maybe not.
#19
Senior Member
Join Date: Mar 2010
Posts: 1,659
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1248 Post(s)
Liked 1,323 Times
in
674 Posts
Right, like carbon fiber never does! LMAO. Cracks in Ti frames are rare, they had issues with earlier ti frames due to trying to make the metal to thin to reduce weight for selling points, that backfired as they did indeed cracked, modern ones rarely have issues unless they come directly from a China manufacture to your house.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Titanium Strength - YouTube
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
https://wheretheroadforks.com/titani...2C%20or%20dent.
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
Titanium Strength - YouTube
Carbon-fibre bicycles in the frame for rising number of injuries – The Irish Times
There are a lot more sites then the ones I listed, but I'm not going to bore you with more proof, but don't dare come against titanium bikes of which you know very little about.
Last edited by Atlas Shrugged; 05-31-22 at 02:08 PM.
#20
For The Fun of It
Join Date: May 2007
Location: Louisissippi Coast
Posts: 5,852
Bikes: Lynskey GR300, Lynskey Backroad, Litespeed T6, Lynskey MT29, Burley Duet
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 2135 Post(s)
Liked 1,647 Times
in
829 Posts
I can use my index finger and my thumb on any major tube on any CF bike and squeeze it hard enough to feel the tubing give, with just one index finger and one thumb on the same hand! that is why you have to use a torque wrench so you don't crush the CF which is very easy to do.
.
#21
Senior Member
Join Date: Sep 2010
Location: NE Indiana
Posts: 8,687
Bikes: 2020 Masi Giramondo 700c; 2013 Lynskey Peloton; 1992 Giant Rincon; 1989 Dawes needs parts; 1985 Trek 660; 1985 Fuji Club; 1984 Schwinn Voyager; 1984 Miyata 612; 1977 Raleigh Competition GS
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1126 Post(s)
Liked 253 Times
in
204 Posts
Ti welds can be a problem. Or more specifically, it takes many years of training and experience to weld Ti and not induce contamination or embrittlement that will lead to premature failure. It is a real risk unless you are buying a high end frame from a single person. From a factory? Roll the dice.
Interesting about CF. I have three CF, two magnesium, and two steel bikes in the garage. I cannot feel the top tube give on any of them. I have had one steel tube break, one Mg weld go bad, and one CF seat tube get crushed by the airlines. None of them are lifetime frames. The steel was unrepairable at a reasonable cost. I have not found anyone yet to weld my Mg tube, and the carbon was expertly repaired and still lives. I've known many people who have had Ti welds go bad. Is it common? Maybe, maybe not.
Interesting about CF. I have three CF, two magnesium, and two steel bikes in the garage. I cannot feel the top tube give on any of them. I have had one steel tube break, one Mg weld go bad, and one CF seat tube get crushed by the airlines. None of them are lifetime frames. The steel was unrepairable at a reasonable cost. I have not found anyone yet to weld my Mg tube, and the carbon was expertly repaired and still lives. I've known many people who have had Ti welds go bad. Is it common? Maybe, maybe not.
#22
Full Member
If you are in-between race and endurance I would highly recommend a Canyon Endurace however most Canyons are pretty hard to come by, heck any bike now a days is pretty hard to find.
I also like the any of the Giant TCR, Felt FR and AR, Scott Addict RC and Foil FC. If you want to chance shipping and customs Ribble in the UK is probably the best bang for your buck bikes out there
I also like the any of the Giant TCR, Felt FR and AR, Scott Addict RC and Foil FC. If you want to chance shipping and customs Ribble in the UK is probably the best bang for your buck bikes out there
#24
Senior Member
I was in your same situation (but lower budget) when I went bike shopping. I ended up with the Canyon Endurace. I am very happy with that decision. It replaced a 2008 Specialized Tarmac. It's every bit as fast (at least as fast as the rider can ride it) and it comfortable enough for multi hour rides. Plus you get a lot more for your money with Canyon. To get a similarly equipped Specialized, Cannondale, or Trek (the three brands available locally) I was going to pay $1000-1400 more. I went with 105 because honestly I don't have a need for anything higher tier. Although when they come out with the Di2 105 I'm going to strongly consider that for my next bike. I did upgrade the wheels as the stock DT Swiss 1850 kept breaking spokes on me. But I'm on the heavier side so that is probably a lot of the reason.
Likes For chadtrent:
#25
-------
Join Date: Jul 2020
Location: Tejas
Posts: 12,795
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 9653 Post(s)
Liked 6,365 Times
in
3,505 Posts
For that kind of money you could get a lifetime bike made of titanium. Lynskey has the R500 with disk brakes and Ultegra Di2 for only $500 over your budget. Personally I don't like electronic shifting because the batteries only last 3 to 5 years and cost at least $85 to replace, it's just another maintenance issue I don't want to be paying for; not to mention you have to plug the stuff in every so many miles, plus you save a lot of money on a new bike if you go with mechanical. Mechanical derailleurs are much simpler to work on, so much so you can do it at home or even on the road and not have to buy different tools, and electronic breakdown on the road you won't be able to fix it; biggest problem is water for electronic derailleurs, water causes a complete failure of the component where it cannot be fixed but has to be replaced, this problem is so annoying a lot riders switched back to mechanical. Like high tech cars, when something goes bad 10 years or so down the road you may not be able to find a part to fix it, that means an all new system which means large amounts of cash! This issue with finding parts is not a problem with mechanical systems. As you know, titanium will far out last carbon fiber, so if this is your retirement bike you want it to last a lifetime, which is why I bought a Lynskey, with 105 components to save money of course, and for the last 9 years it's worked flawlessly.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
Get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
Be wise with your money, like you said things are going to get tougher with inflation.
There are advantages to electric shifting, it's not all bad news, you can find all sorts of positive writeups about electronic shifting because the marketing forces generate that stuff, but read this article before you decide:
Get to know 7 downsides of electronic shifting; the annoying things they never tell you about | road.cc
Be wise with your money, like you said things are going to get tougher with inflation.
Likes For Mojo31: