Shim 105 STI Lever and Canti breaks
#1
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shim 105 STI Lever and Canti breaks
So I have Shim 105 levers to install on a 11sp Shim drivetrain.
I have a new fork thats a caliper/canti/disc combo and a new frame that is only canti. I've seen some posts about drilling the hole to accept rim on a frame but the reach would need to be almost 70mm.
Does anyone have any recommendations about what canti breaks I can use on the rear wheel?! There is a lot of conflicting info about.
This is my first build and I have definitely made some mistakes already without actually getting around to the building with my decision on frames etc etc. So I would like to see if I can make this work before considering switching out the frame!
Many thanks for the help!!
I have a new fork thats a caliper/canti/disc combo and a new frame that is only canti. I've seen some posts about drilling the hole to accept rim on a frame but the reach would need to be almost 70mm.
Does anyone have any recommendations about what canti breaks I can use on the rear wheel?! There is a lot of conflicting info about.
This is my first build and I have definitely made some mistakes already without actually getting around to the building with my decision on frames etc etc. So I would like to see if I can make this work before considering switching out the frame!
Many thanks for the help!!
#2
I am potato.
Join Date: Jun 2015
Location: Pacific Northwest
Posts: 3,116
Bikes: Only precision built, custom high performance elitist machines of the highest caliber. 🍆
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1789 Post(s)
Liked 1,629 Times
in
933 Posts
By: "Shim," I assume you mean Shimano.
By: "Breaks," I assume you mean brakes.
If I have the correct understanding:
Cantilever brakes have the same pull ratio as road brake levers as road disc brakes...So yes, all your parts road Shimano 105, road disc brakes, cantilever brakes, road caliper brakes are compatible & will work together.
Shimano BR-CT91 are about $14. For the rear, this is a given.
For the front, since you have the option, I like TRP Spyre. But another BR-CT91 would work. Pick according to your wheel.
Where you run into issues is with linear pull v-brakes, mountain disc brakes & road brake levers. Not enough lever travel to to make pads contact & still have enough to actually brake with. Or vice/versa with road brakes & mountain levers. Super firm brake & not enough leverage to effect a stop.
Neither is your case.
Install & have fun.
By: "Breaks," I assume you mean brakes.
If I have the correct understanding:
Cantilever brakes have the same pull ratio as road brake levers as road disc brakes...So yes, all your parts road Shimano 105, road disc brakes, cantilever brakes, road caliper brakes are compatible & will work together.
Shimano BR-CT91 are about $14. For the rear, this is a given.
For the front, since you have the option, I like TRP Spyre. But another BR-CT91 would work. Pick according to your wheel.
Where you run into issues is with linear pull v-brakes, mountain disc brakes & road brake levers. Not enough lever travel to to make pads contact & still have enough to actually brake with. Or vice/versa with road brakes & mountain levers. Super firm brake & not enough leverage to effect a stop.
Neither is your case.
Install & have fun.
Last edited by base2; 04-15-20 at 10:15 PM.
#3
Junior Member
Thread Starter
Join Date: Apr 2020
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
By: "Shim," I assume you mean Shimano.
By: "Breaks," I assume you mean brakes.
If I have the correct understanding:
Cantilever brakes have the same pull ratio as road brake levers as road disc brakes...So yes, all your parts road Shimano 105, road disc brakes, cantilever brakes, road caliper brakes are compatible & will work together.
Where you run into issues is with linear pull v-brakes, mountain disc brakes & road brake levers. Not enough lever travel to to make pads contact & still have enough to actually brake with. Or vice/versa with road brakes & mountain levers. Super firm brake & not enough leverage to effect a stop.
Neither is your case.
Install & have fun.
By: "Breaks," I assume you mean brakes.
If I have the correct understanding:
Cantilever brakes have the same pull ratio as road brake levers as road disc brakes...So yes, all your parts road Shimano 105, road disc brakes, cantilever brakes, road caliper brakes are compatible & will work together.
Where you run into issues is with linear pull v-brakes, mountain disc brakes & road brake levers. Not enough lever travel to to make pads contact & still have enough to actually brake with. Or vice/versa with road brakes & mountain levers. Super firm brake & not enough leverage to effect a stop.
Neither is your case.
Install & have fun.
I shall look for some Shimano canti brakes and enjoy!