Want To Buy: Campagnolo Chrome Headset
#1
Senior Member
Thread Starter
Join Date: Oct 2014
Location: Reno nevada
Posts: 787
Bikes: a few that I can't recall
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 302 Times
in
147 Posts
Want To Buy: Campagnolo Chrome Headset
Want To Buy (WTB means "Wilderness Trail Bikes")
Want to Buy: Campagnolo Steel headset for 1980s Colnago frame. It does NOT need good threads*, as I am using with threadless stem and fork. To be honest, I probably don't even need the top locknut.
I have an aluminum Record threadless headset, and it just doesn't look right on this frame.
* I will be machining the threads out on a lathe, to convert to "threadless".
Want to Buy: Campagnolo Steel headset for 1980s Colnago frame. It does NOT need good threads*, as I am using with threadless stem and fork. To be honest, I probably don't even need the top locknut.
I have an aluminum Record threadless headset, and it just doesn't look right on this frame.
* I will be machining the threads out on a lathe, to convert to "threadless".
Last edited by Reynolds 531; 03-31-23 at 01:25 PM.
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,383 Times
in
3,669 Posts
Want To Buy (WTB means "Wilderness Trail Bikes")
Want to Buy: Campagnolo Steel headset for 1980s Colnago frame. It does NOT need good threads, as I am using with threadless stem and fork. To be honest, I probably don't even need the top locknut.
I have an aluminum Record threadless headset, and it just doesn't look right on this frame.
Want to Buy: Campagnolo Steel headset for 1980s Colnago frame. It does NOT need good threads, as I am using with threadless stem and fork. To be honest, I probably don't even need the top locknut.
I have an aluminum Record threadless headset, and it just doesn't look right on this frame.
And also pretty sure WTB was Want To Buy before Wilderness Trail Bikes came along.
And IMO, alu HS never looks right on anything remotely C+V.
Someone should be along shortly to help out.
Last edited by merziac; 03-31-23 at 01:22 PM.
#4
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,949
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 117 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,911 Times
in
1,141 Posts
Zepherblau has one listed on the page below your posting today. Smiles, MH
#5
Full Member
Join Date: May 2015
Location: Mason Ohio
Posts: 238
Bikes: '85 Schwinn Madison, '46 Higgins Ultralite, 1950s Wally Green, '85 Trek 660, '82 3Rensho Export, '90 Trek 970, '91 Schwinn Paramount, '78 Dawes, '78 Trek 730
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 77 Post(s)
Liked 261 Times
in
107 Posts
PM me if your still looking.
Last edited by brewerkz; 04-08-23 at 10:14 AM.
#6
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
any Campagnolo headset should work.
English and Italian threading only vary by inclusive angle of the threading and French is just .4mm smaller- all other interfaces the same.
not going to be easy to machine, the part is hardened.
#7
Senior Member
Thread Starter
Join Date: Oct 2014
Location: Reno nevada
Posts: 787
Bikes: a few that I can't recall
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 302 Times
in
147 Posts
if you are going to machine away the threads...
any Campagnolo headset should work.
English and Italian threading only vary by inclusive angle of the threading and French is just .4mm smaller- all other interfaces the same.
not going to be easy to machine, the part is hardened.
any Campagnolo headset should work.
English and Italian threading only vary by inclusive angle of the threading and French is just .4mm smaller- all other interfaces the same.
not going to be easy to machine, the part is hardened.
#8
Senior Member