Non-bike C&V repairs
#1
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,469 Times
in
1,435 Posts
Non-bike C&V repairs
My wife's piano bench got really wobbly, and she asked me to fix it. Some rods had fallen out of the mechanism and gone missing. Figuring out how to disassemble the bench and get the mechanism out was hard work. There are dozens of screws and rods and brass bushings. The bench is the kind that can go up and down when you turn the knobs at the ends. I don't know how old it is. It is immensely heavy. Turning it over and bending over it were some aspects of the difficulty.
I managed to do it. The construction and materials used and the workmanship on this thing are impressive. I wonder if they are this well made nowadays. The pantograph rods appear to be brass. The steel base of the mechanism is massive, as is the threaded rod.
The hardware didn't have brass rod, so I used steel. The guy working there cut the rod into the lengths I needed.
I cleaned up the hardened grime from the places where metal moves against metal and added lubrication.
I managed to do it. The construction and materials used and the workmanship on this thing are impressive. I wonder if they are this well made nowadays. The pantograph rods appear to be brass. The steel base of the mechanism is massive, as is the threaded rod.
The hardware didn't have brass rod, so I used steel. The guy working there cut the rod into the lengths I needed.
I cleaned up the hardened grime from the places where metal moves against metal and added lubrication.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#2
Senior Member
Nice job!
I just refurbed some c. 1970 KLH speakers; completely rebuilt the crossovers etc. Easier than your project but rewarding, and they sound great now.
Do you know this one?
Mend it, fix it,
Wear it out.
Make it do
Or do without.
I just refurbed some c. 1970 KLH speakers; completely rebuilt the crossovers etc. Easier than your project but rewarding, and they sound great now.
Do you know this one?
Mend it, fix it,
Wear it out.
Make it do
Or do without.
#3
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
C&V skills translate to other areas, clearly.
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For exmechanic89:
#6
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,469 Times
in
1,435 Posts
Thank you, @squirtdad. I'm not actually that confident, because my skill set isn't all that broad. I'm a lousy carpenter, and I totally failed at hanging sheetrock.
@markwesti, I love machines from that period.
I suspect this piano bench is from the 60s or 70s because it has the label that certifies that the material is all new and the label can only be removed by the consumer, i.e. the same label that comes on mattresses and pillows.
@markwesti, I love machines from that period.
I suspect this piano bench is from the 60s or 70s because it has the label that certifies that the material is all new and the label can only be removed by the consumer, i.e. the same label that comes on mattresses and pillows.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#7
Still learning
My favorite C&V work
Sweating cooper pipe is cool too, but now pex is so much faster.
Just put this circa 1923 home under contract and hope to start upgrading in March. Four car garage!
Sweating cooper pipe is cool too, but now pex is so much faster.
Just put this circa 1923 home under contract and hope to start upgrading in March. Four car garage!
Last edited by oddjob2; 01-23-17 at 09:33 PM.
Likes For oddjob2:
#8
aka Tom Reingold
Thread Starter
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,469 Times
in
1,435 Posts
Hey @oddjob2, that's really cool. So is there a homeforumrepairs.net or something like that? I need to pick up skills.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#9
Banned.
Join Date: May 2010
Location: Snohomish, WA.
Posts: 2,866
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 469 Post(s)
Liked 2,443 Times
in
646 Posts
I've done a crapload of repairs on this 1988 Volvo. It's pushing 450k, so replacing parts is to be expected.
Struts and Ball joints
This was the biggest pain in the ass job to do on any car I've worked on... Heater core and blower motor
Struts and Ball joints
This was the biggest pain in the ass job to do on any car I've worked on... Heater core and blower motor
Likes For Mike from Iowa:
#11
Still learning
Hey @oddjob2, that's really cool. So is there a homeforumrepairs.net or something like that? I need to pick up skills.
Lots of video on youtube.
The Sunset series below are a godsend and cheap;
https://www.amazon.com/Basic-home-wiring-illustrated-Sunset/dp/0376010940
Also, Fine Homebuilding Magazine DVD
Tom, your cool West Village loft doesn't appear to need work. If you need help in the Hudson Valley, let me know as I must pass by it 4 times a year.
#12
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
I need to test my fuel pressure on my '87 VW Vanagon Westy. My van won't run long enough to get me to the FLAPS so borrowing one of their tools might be out. I did price a set at Harbor Freight yesterday but it appears that all the connection fittings are clamp on or press on, no threaded ones to fit the fuel T in the engine compartment. Hmmm, is that safe?
Removed the little bolt (see above) to check the size and checked against my stash of bike parts, figuring what I need is a bicycle brake barrel adjuster to use as the thread-in piece to clamp a hose onto. Knew immediately that the size would be a problem since most adjusters are 6mm diameter by 1mm threading. Too big. I also remembered that old French 10-speeds used very small adjusting barrels so it was off to the co-op to check out the scrounge boxes. Bless their hearts, I found two Huret Allvit rear derailleurs with adjusters intact and scavenged them. I'm working in a gravel driveway and I will drop one of them. That's the law.
Anyway, now that I have the piece I can buy a gauge and do my testing, fully aware that my "Goddam, I'm freakin' brilliant" feeling might well come crashing down on me.
Below: Typical adjuster on top, with screw from my bin that matches the threading on the T bolt that I used to search for the smaller barrel.
Hooray for French bikes!
It has since been recommended that I only need to press a test hose onto that barb once the bolt is removed, so my "freakin' brilliant" glow is turning to "Oh, never mind."
Removed the little bolt (see above) to check the size and checked against my stash of bike parts, figuring what I need is a bicycle brake barrel adjuster to use as the thread-in piece to clamp a hose onto. Knew immediately that the size would be a problem since most adjusters are 6mm diameter by 1mm threading. Too big. I also remembered that old French 10-speeds used very small adjusting barrels so it was off to the co-op to check out the scrounge boxes. Bless their hearts, I found two Huret Allvit rear derailleurs with adjusters intact and scavenged them. I'm working in a gravel driveway and I will drop one of them. That's the law.
Anyway, now that I have the piece I can buy a gauge and do my testing, fully aware that my "Goddam, I'm freakin' brilliant" feeling might well come crashing down on me.
Below: Typical adjuster on top, with screw from my bin that matches the threading on the T bolt that I used to search for the smaller barrel.
Hooray for French bikes!
It has since been recommended that I only need to press a test hose onto that barb once the bolt is removed, so my "freakin' brilliant" glow is turning to "Oh, never mind."
Last edited by thumpism; 11-20-19 at 06:21 PM.
#13
Senior Member
Roger M, we just picked up a 1988 Volvo 240 with 38000 miles on it. Literally looks like a new car, but I am doing a full service on it before we start using it. Including shocks and struts because it is so old. Had two 240s years ago with over 200,000 each, and they were easy to work on. Very happy I never had to replace wiper armature or blower motor. Two nightmarish jobs.
#14
PM me your cotters
Join Date: Jun 2015
Location: ATL
Posts: 3,241
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 1137 Post(s)
Liked 590 Times
in
422 Posts
Wish I would've taken before/after pics of it. 9yo came to me today, got one of those infernal fidget spinners from a classmate. Covered in some mystery paint, top to bottom, in every groove. "Please fix this, I see what you do with the cars and the bikes. This is the same stuff, right? Mechanical."
Challenge accepted? The thing was chunky, spun like a badly indexed headset. Was hoping the crap painted on it was water-based, so I soaked it in dish soap and hot water for a couple hours. Nada. Didn't even soften it.
Took it into the shop. Took a smidge of PB Blaster and rubbed across, *shloop* my finger saw a slurry of whatever it was, we have a winner. So I slathered on some more, let it sit, brushed it, let it sit, brushed it. Repeated 'til clean. Turns out this thing was actually blue at one time in its life.
The PBB got in there enough to loosen the center pivot, so I unscrewed the two halves, got access to the unsealed bearing, 3-in-1 in there, spin-spin-spin, flush, Finish Line'd it, blue Loctite on the fastener, screwed it back together. Took a little extra work to clean out the slots in the arms, but everything was pretty well softened from the PBB.
There's still some little traces of white, blue, yellow and green paint in some of the nooks and crannies, but the thing spins for 2-3 minutes straight with one good throw. My kids' smiles were priceless when they saw how long it'd run for. Just gotta let it sit up overnight for that Loctite to harden. May replace the blue with some red. Not sure yet.
But yes, C&V definitely translates to other things.
Challenge accepted? The thing was chunky, spun like a badly indexed headset. Was hoping the crap painted on it was water-based, so I soaked it in dish soap and hot water for a couple hours. Nada. Didn't even soften it.
Took it into the shop. Took a smidge of PB Blaster and rubbed across, *shloop* my finger saw a slurry of whatever it was, we have a winner. So I slathered on some more, let it sit, brushed it, let it sit, brushed it. Repeated 'til clean. Turns out this thing was actually blue at one time in its life.
The PBB got in there enough to loosen the center pivot, so I unscrewed the two halves, got access to the unsealed bearing, 3-in-1 in there, spin-spin-spin, flush, Finish Line'd it, blue Loctite on the fastener, screwed it back together. Took a little extra work to clean out the slots in the arms, but everything was pretty well softened from the PBB.
There's still some little traces of white, blue, yellow and green paint in some of the nooks and crannies, but the thing spins for 2-3 minutes straight with one good throw. My kids' smiles were priceless when they saw how long it'd run for. Just gotta let it sit up overnight for that Loctite to harden. May replace the blue with some red. Not sure yet.
But yes, C&V definitely translates to other things.
Likes For francophile:
#15
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,395 Times
in
2,056 Posts
Replaced the rotted out blade on my vintage plow truck with a bit better one. Of course every time I get it that truck it might be the last.
All Done
Got it off.
Old one was already patched a few times.
All Done
Got it off.
Old one was already patched a few times.
Likes For dedhed:
#17
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
#19
Senior Member
Join Date: Jan 2013
Posts: 2,679
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 582 Times
in
409 Posts
Could not agree more. This summer I re-plumbed our 1940's hand hewed log cabin pulling all the galvanized pipe out of the crawl space. I love copper having spent 32 years in the copper industry, but will never touch it again after using PEX and Sharkbites, no doubt saved me days of work. Sweating copper on your back in a 18" crawl space full of spiders is a slow go.
#20
Still learning
Glue Lam in place and temp support wall framing
New joists and 8' opening.
Final copper rough in
New DWV to be boxed in with soffit.
Risers
Could not agree more. This summer I re-plumbed our 1940's hand hewed log cabin pulling all the galvanized pipe out of the crawl space. I love copper having spent 32 years in the copper industry, but will never touch it again after using PEX and Sharkbites, no doubt saved me days of work. Sweating copper on your back in a 18" crawl space full of spiders is a slow go.
The 95 y.o. house in my earlier post had a crappy 1950's bath remodel that compromised the floor framing and caused tile cracking. It is a small house with one full bath and an obsolete basement full bath. The original supply pipes were iron.
In the process of remodeling, I removed the wall between kitchen and dining room and framed new joists for the upper bathroom. As a repipe project I removing two ill configured closets to make room for 2 baths upstairs, added a powder room on the main level in a minimal dimension closet, and repiped the basement bath for dog shampoos. Since I am not an expert in laying out DWV, I hired out the rough plumbing, which was completed yesterday. It took 6 months to find a decent plumber and ended up working with my S.O.'s sibling's outfit.
Last edited by oddjob2; 11-21-19 at 09:33 AM.
#21
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
Ooops I have been zombied.
#22
Wood
Join Date: Jun 2009
Location: Beaumont, Tx
Posts: 2,293
Bikes: Raleigh Sports: hers. Vianelli Professional & Bridgestone 300: mine
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
I use a lot of my bike-repairing skills to augment my guitar-repairing skills, and vice versa.
#23
Still learning
An opportunity to buy my next door neighbor's home came up. Living with my dad in a 2 br/1 bath is not cutting it. So now I have 2 projects within a block. This house needs new kitchen, interior paint, floor refinish, new lighting, wiring, central AC, and a new driveway. Bathroom updating too, but not likely to the studs. With 2 more garages. Finally, enough real estate to accommodate my furnishings, the MCM furnishings from my parents, four vehicles, and too many bikes.
Powder room
Last edited by oddjob2; 11-21-19 at 09:56 AM.
#24
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,846
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
I hate when that happens....which is all to often for me.....at least I as brilliant for a bit
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#25
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,748
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 938 Post(s)
Liked 2,940 Times
in
981 Posts
Another zombie thread rises!
When I was a kid I put myself in the "all thumbs" category. After I was taught how to wrench and build wheels at age 15, I became confident in my ability to disassemble and reassemble anything. My parents must have been surprised when I stripped my other prized object, a vintage Hasselblad camera. Yes, the skills transfer.
When I was a kid I put myself in the "all thumbs" category. After I was taught how to wrench and build wheels at age 15, I became confident in my ability to disassemble and reassemble anything. My parents must have been surprised when I stripped my other prized object, a vintage Hasselblad camera. Yes, the skills transfer.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport