Cyclocross event-legal tires for 26" wheels?
#1
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
Cyclocross event-legal tires for 26" wheels?
I'm an older guy who's up to giving a local event a try this coming September. I'm not as limber as when I was young, so I have an older steel MTB that has a nice, low top tube that should make dismounting and mounting quite a bit easier. I do my own mechanical work and have pretty much everything sorted except... tires. The frame is made for 26" wheels (aka 559s). I don't see how I could fit 584s or 590s in, so I'm limited there. Where I'm having a challenge is finding tires that are at or under the legal width limit of 33mm.
Does anyone know of tires that would fit in this size AND have a suitable tread pattern for an event?
Thanks,
Z (from C&V)
Does anyone know of tires that would fit in this size AND have a suitable tread pattern for an event?
Thanks,
Z (from C&V)
__________________
In search of what to search for.
In search of what to search for.
#2
Disco Infiltrator
Join Date: May 2013
Location: Folsom CA
Posts: 13,446
Bikes: Stormchaser, Paramount, Tilt, Samba tandem
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,105 Times
in
1,369 Posts
Check with the organizers. The events near me only enforce rules like this at the fastest level of competition.
__________________
Genesis 49:16-17
Genesis 49:16-17
#3
Newbie
Join Date: May 2007
Location: Marion, IA
Posts: 68
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The 33mm width is only enforced at Nationals for amateur racers, and UCI level categories at any other races, the rest of the time it is a run what you brung. Back in the late 90's when I was racing cross on my mountain bike I had a set of Continental Cross Country tires in a 26x1.5 and those were great. Like mentioned above check with the promoter or your local USAC official that may be working the race and they could tell you what rules apply at each event.
#5
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,486 Times
in
870 Posts
Just to confirm - USA Cycling specifically states on their website that "any tire width is allowed for local USA Cycling-permitted cyclocross races".
Even at the USA Cycling National Championships, the 33mm rule only applies to certain categories now (masters can run up to 38mm, for instance).
Even at the USA Cycling National Championships, the 33mm rule only applies to certain categories now (masters can run up to 38mm, for instance).
#6
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,996
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4954 Post(s)
Liked 8,095 Times
in
3,831 Posts
#7
staring at the mountains
Join Date: Mar 2005
Location: Castle Pines, CO
Posts: 4,560
Bikes: Obed GVR, Fairdale Goodship, Salsa Timberjack 29
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 394 Post(s)
Liked 197 Times
in
112 Posts
I raced in exactly 1 CX event on a 26er, and I ran these, kinda the only "CX" tire I could find: https://www.biketiresdirect.com/prod...o-26?fltr=3750
#8
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
I raced in exactly 1 CX event on a 26er, and I ran these, kinda the only "CX" tire I could find: https://www.biketiresdirect.com/prod...o-26?fltr=3750
__________________
In search of what to search for.
In search of what to search for.
#9
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,925
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,093 Times
in
640 Posts
40+ years ago I could probably run a course as fast as I could ride it today. I have no doubt that I should be able to manage dismounting off the back, but getting back on... maybe not. I still like the idea of the smaller frame though.
__________________
In search of what to search for.
In search of what to search for.
#10
Habitual User
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,996
Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4954 Post(s)
Liked 8,095 Times
in
3,831 Posts
Mounting doesn’t happen over the top tube, either. Learning and practicing proper technique for getting on and off your bike is worth the effort. Also, a lower top tube also means a smaller space for shouldering the bike for run-ups. This is not an advantage.
__________________
"Swedish fish. They're protein shaped." - livedarklions
"Swedish fish. They're protein shaped." - livedarklions
#11
Senior Member
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,880
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 1461 Post(s)
Liked 1,486 Times
in
870 Posts
I'm also trying to imagine how someone gets on a bike by swinging a leg over the top tube, but not the saddle.
Likes For msu2001la: