Show me your Sears bikes.
#26
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 347 Times
in
205 Posts
I did later install a larger hybrid seat because it sat higher off of the seatpost and I removed the "box drop" handlebars that originally came with it and replaced with some cut down fixie riser bars. I added a rear fender, which was originally a front fender on a different bike.
The bike was too small for me and it hurt my knees quite badly, so I ended up putting a 7 speed freewheel on it with a Shimano Deore derailleur. I also installed a rear rack and put the original handlebars back on, but they were flipped backwards like the picture below. I kept the BMX cranks, but installed a chainring from a Schwinn Varsity in order to use the narrower, 7 speed chain.
The bike was too small for me and it hurt my knees quite badly, so I ended up putting a 7 speed freewheel on it with a Shimano Deore derailleur. I also installed a rear rack and put the original handlebars back on, but they were flipped backwards like the picture below. I kept the BMX cranks, but installed a chainring from a Schwinn Varsity in order to use the narrower, 7 speed chain.
#27
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,159
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 1,755 Times
in
1,195 Posts
Actually, I was pretty small as a kid. I could easily have kept a 20" Sting-Ray or Spyder up to age 14-15. My dad insisted they were "dangerous" and would only buy a 26" single-speed, which happened to be a Sears cantilever-frame, and was actually too big for me (and therefore not really safe) for the first couple years. I ran the 24" compromise up the flag pole, but once he'd made up his mind.....
Last edited by madpogue; 11-28-22 at 04:55 PM.
#28
Senior Member
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,500
Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others
Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 584 Post(s)
Liked 702 Times
in
396 Posts
Yes it does!!! Time to grow up and be practical. I guess what I was referring to was using the bike for a kid’s actual transportation. It seems odd, but kids did that stuff then when we wouldn’t let our kids venture too far now. Simpler times I guess. Your muscle bikes do sound like some stylin’ fun.
Likes For sd5782:
#29
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,196
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1566 Post(s)
Liked 1,299 Times
in
867 Posts
Likes For dddd:
#30
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,001
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 3,664 Times
in
1,682 Posts
Retirement is the answer as long as you don't get in too many bands.
#31
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,761
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 3,001 Times
in
989 Posts
Need a few extra years to replenish what I put into the Woodstock house. That said, the house is often a demand generator. You know the drill.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
#32
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,801
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Made in Austria
Here is one.
Likes For dweenk:
#33
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,801
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Free Spirit modified to 7 speed IGH.
Last edited by dweenk; 11-30-22 at 10:54 AM.
Likes For dweenk:
#34
Full Member
Join Date: Nov 2019
Location: Greater Chicago Area
Posts: 250
Bikes: 1987 Schwinn Mirada, 1989 Trek 420, 1995 GT Timberline, 1979 Schwinn Super Le Tour, Co-Op DRT 1.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 85 Times
in
49 Posts
Got this for free, used it for a local errand runner for a couple months and it rode surprisingly well for what it was. Then it did trainer duty in my basement for a couple of winters. Finally put new tires on it and gave it to an acquaintance who needed a cheapo urban commuter.
Likes For Miradaman:
#35
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,801
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Sears Reynolds 531
531 frame and fork.
Likes For dweenk:
#36
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,526
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2751 Post(s)
Liked 3,407 Times
in
2,062 Posts
#37
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 347 Times
in
205 Posts
Got this for free, used it for a local errand runner for a couple months and it rode surprisingly well for what it was. Then it did trainer duty in my basement for a couple of winters. Finally put new tires on it and gave it to an acquaintance who needed a cheapo urban commuter.
#38
Full Member
Join Date: Nov 2019
Location: Greater Chicago Area
Posts: 250
Bikes: 1987 Schwinn Mirada, 1989 Trek 420, 1995 GT Timberline, 1979 Schwinn Super Le Tour, Co-Op DRT 1.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 103 Post(s)
Liked 85 Times
in
49 Posts
I think that style was standard equipment for a lot of dept store "road" bikes in the 70s. They were originally positioned so the drop end portion was parallel to the road. I turned them up to the angle shown, as I found the original position way too uncomfortable to ride with...
Likes For Miradaman:
#39
Senior Member
Thread Starter
Join Date: Sep 2021
Posts: 726
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 264 Post(s)
Liked 347 Times
in
205 Posts
I think that style was standard equipment for a lot of dept store "road" bikes in the 70s. They were originally positioned so the drop end portion was parallel to the road. I turned them up to the angle shown, as I found the original position way too uncomfortable to ride with...
#42
Full Member
Join Date: Jul 2022
Location: Illinois
Posts: 345
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked 294 Times
in
155 Posts
The next bike, a 10-speed, was from Sears, and I believe this was too. This took me to grade school with books and lunchbox for a few years. Kitted with speedo and baskets and wore the occasional tiger tail, lol. It had Mattell’s V’rooom motor on it for a short time.
Likes For big chainring:
#44
Senior Member
Join Date: May 2020
Location: Great White North
Posts: 1,226
Bikes: 2013 Cannondale Caad 8, 2010 Opus Fidelio, 1985 Peugeot UO14, 1999 Peugeot Dune, Sakai Select, L'Avantage, 1971 Gitane Apache Standard, 1999 Specialized Hard Rock
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 548 Post(s)
Liked 473 Times
in
302 Posts
This bike would have been a Free Spirit if sold in a province outside of Quebec/Canada but was re-branded as a L'Avantage bike from Sears. Made a few modifications and rides really nice but super heavy. I really liked the 3 Ovaltech chainrings.
Likes For gthomson:
#45
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,761
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 3,001 Times
in
989 Posts
Ok, the Ted WIlliams is done.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
Likes For ascherer:
#46
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,650
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3901 Post(s)
Liked 6,511 Times
in
3,226 Posts
Me and my sis with our Christmas Free Spirits.
Likes For SurferRosa:
#47
Senior Member
Join Date: Dec 2005
Posts: 17,173
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3817 Post(s)
Liked 6,738 Times
in
2,623 Posts
Likes For nlerner:
#48
Full Member
Join Date: Jul 2022
Location: Illinois
Posts: 345
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked 294 Times
in
155 Posts
Originally Posted by big chainring;[url=tel:22726308
22726308[/url]]Is that a real bike.... or a Sears bike....,???
#49
Newbie
I present to you ... the look of disappointment.
I became a cycling enthusiast at age 12 (which, in 1973, pre-Greg Lemond, equals "weirdo" ... hence, the Dave Stohler character in Breaking Away is an accurate representation of that time in America) by hanging around the local bike shop (Schwinn chain, but they had Nishiki, Windsor, all-steel Peugeots, and the obligatory framed Paramount on the wall) and subscribing to Bicycling! magazine. My "born in the Great Depression" era parents couldn't fathom spending (gasp!) $100+ on a bicycle (golf clubs for themselves ... well ... that's DIFFERENT!) so I got this Sears "thing."
THE GOOD: Downtube shifters with Simplex gear instead of stem mounts, steel cottered crank instead of one-piece, no silly safety brake levers, lugged(!) frame, a plastic saddle instead of a horrid padded one with a steel base. And I just noticed ... nice curve on those dropped bars!
THE BAD: Absolutely nothing to keep the downtube shifters from sliding down the downtube (more on this later), 26" wheels (I guess 700c compatible?) with steel rims, stamped steel sidepulls brakes that didn't.
It would go back for "warranty repair" in a vain attempt to keep the downtube levers in place (in hindsight, a drill and a steel screw would have done the trick) ... until it was stolen from the 3rd-party repair shop. The elderly foreign gentleman who ran the shop offered me a Montgomery Wards drainpipe bike with Shimano Eagle gear as a replacement. I should have said, "Oh HELL no!"
I haven't been able to find this model in any Sears catalogs online. Another forum member said it's from Chiorda in Italy. A quick internet search of "Chiorda" and the first result is ... "Chiorda ... Italy's Worst?"
I became a cycling enthusiast at age 12 (which, in 1973, pre-Greg Lemond, equals "weirdo" ... hence, the Dave Stohler character in Breaking Away is an accurate representation of that time in America) by hanging around the local bike shop (Schwinn chain, but they had Nishiki, Windsor, all-steel Peugeots, and the obligatory framed Paramount on the wall) and subscribing to Bicycling! magazine. My "born in the Great Depression" era parents couldn't fathom spending (gasp!) $100+ on a bicycle (golf clubs for themselves ... well ... that's DIFFERENT!) so I got this Sears "thing."
THE GOOD: Downtube shifters with Simplex gear instead of stem mounts, steel cottered crank instead of one-piece, no silly safety brake levers, lugged(!) frame, a plastic saddle instead of a horrid padded one with a steel base. And I just noticed ... nice curve on those dropped bars!
THE BAD: Absolutely nothing to keep the downtube shifters from sliding down the downtube (more on this later), 26" wheels (I guess 700c compatible?) with steel rims, stamped steel sidepulls brakes that didn't.
It would go back for "warranty repair" in a vain attempt to keep the downtube levers in place (in hindsight, a drill and a steel screw would have done the trick) ... until it was stolen from the 3rd-party repair shop. The elderly foreign gentleman who ran the shop offered me a Montgomery Wards drainpipe bike with Shimano Eagle gear as a replacement. I should have said, "Oh HELL no!"
I haven't been able to find this model in any Sears catalogs online. Another forum member said it's from Chiorda in Italy. A quick internet search of "Chiorda" and the first result is ... "Chiorda ... Italy's Worst?"
Last edited by zbillster; 12-26-22 at 10:12 PM. Reason: correction