Weird FD issue
#1
Full Member
Thread Starter
Join Date: Mar 2017
Posts: 211
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
Weird FD issue
Hello,
I have bought a second-hand road bike in early june, tarmac SL4 with shimano 105 5700 groupset, with a triple 50-39-30 crankset. FD is compatible with this.
Since I have it the FD isn't working properly, 3 different bike shop took a look at it, but none managed to index the FD, I tried aswell with no success. 4 people that know about roadbikes failing to index a FD.. there is a weird thing going on.
The main problem is downshifting from the big ring to the middle ring, I have 2 choices : either I can downshift easily but 50-11/13/15 are rubbing, or nothing is rubbing but I have to be high in the cassette to downshift / I have to downshift to the little ring and then upshift onto the middle ring (clearly this kills the momentum I have at the bottom of a climb).
I have now ridden 5 500km (3 500ish miles), but I just can't stand it anymore.
I was thinking about changing the big ring, middle ring, cassette, chain and FD.
I would like to get a 53T ring but I don't think any FD can have enough capacity to do 53T to 30T, and going 53-39 is not possible since I love doing hard climbs (39 is too much for me in those climbs) and changing the lever is expensive.
Do you guys have any ideas on what can I do ? (about fixing the current set up or thinking about a new set up)
Here are some photos of the FD when the chain is on the middle or big ring (I know it's dirty but when everything was clean it wasn't working either, now I live in a small flat it's hard to find a place to clean the bike and use chemicals)
https://ibb.co/vv5mDcq
https://ibb.co/hZNxGGV
https://ibb.co/jzf2Lnq
https://ibb.co/Y2NrkzX
Thank you for your time, I really appriciate it.
I have bought a second-hand road bike in early june, tarmac SL4 with shimano 105 5700 groupset, with a triple 50-39-30 crankset. FD is compatible with this.
Since I have it the FD isn't working properly, 3 different bike shop took a look at it, but none managed to index the FD, I tried aswell with no success. 4 people that know about roadbikes failing to index a FD.. there is a weird thing going on.
The main problem is downshifting from the big ring to the middle ring, I have 2 choices : either I can downshift easily but 50-11/13/15 are rubbing, or nothing is rubbing but I have to be high in the cassette to downshift / I have to downshift to the little ring and then upshift onto the middle ring (clearly this kills the momentum I have at the bottom of a climb).
I have now ridden 5 500km (3 500ish miles), but I just can't stand it anymore.
I was thinking about changing the big ring, middle ring, cassette, chain and FD.
I would like to get a 53T ring but I don't think any FD can have enough capacity to do 53T to 30T, and going 53-39 is not possible since I love doing hard climbs (39 is too much for me in those climbs) and changing the lever is expensive.
Do you guys have any ideas on what can I do ? (about fixing the current set up or thinking about a new set up)
Here are some photos of the FD when the chain is on the middle or big ring (I know it's dirty but when everything was clean it wasn't working either, now I live in a small flat it's hard to find a place to clean the bike and use chemicals)
https://ibb.co/vv5mDcq
https://ibb.co/hZNxGGV
https://ibb.co/jzf2Lnq
https://ibb.co/Y2NrkzX
Thank you for your time, I really appriciate it.
#2
Senior Member
Join Date: Dec 2009
Posts: 587
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 151 Times
in
105 Posts
First thing I would do is clean the chain, cassette and chainrings really well. From the pictures it looks like sandy grit on the drivetrain and I find in extreme cases it can cause chain suck and it less extreme cases it can slow down shifting. The next thing I would do is adjust the front derailleur by rotating it clockwise so the rear part of the cage is slightly inboard which I find can help with downshifting. Also make sure the bottom of the cage is in the correct position in relation to the top of the chain rings.
#3
Senior Member
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,837
Bikes: 2016 Fuji Tread, 1983 Trek 520
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 741 Times
in
430 Posts
The FD appears in the photos to be a few mm too high. It should clear the large chain ring by 1 to 2 mm. I agree with the 1 to 2 degrees of rotation.
As a last desperate measure before you replace parts, I would try "modifying" the FD cage. Use adjustable wrenches to bend the outer plate a fraction of a mm, see if you can get the right clearance in the right spot, and still retain shift quality. I've done that on cheaper bikes and components, and would never do it on someone else's or a client's bike.
As a last desperate measure before you replace parts, I would try "modifying" the FD cage. Use adjustable wrenches to bend the outer plate a fraction of a mm, see if you can get the right clearance in the right spot, and still retain shift quality. I've done that on cheaper bikes and components, and would never do it on someone else's or a client's bike.
#4
Senior Member
Join Date: Jun 2019
Posts: 580
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 254 Post(s)
Likes: 0
Liked 182 Times
in
141 Posts
The DR is also positioned slightly higher than necessary. I would try dropping it down a few mm and see if that helps, especially when combined with an optimum angle as mentioned by others.
Basically, just start from scratch as if you were installing it for the first time and setting the height and angle and setting up the indexing. Sometimes that works better than trying to make minor tweaks to an existing position.
Basically, just start from scratch as if you were installing it for the first time and setting the height and angle and setting up the indexing. Sometimes that works better than trying to make minor tweaks to an existing position.
#5
Full Member
Thread Starter
Join Date: Mar 2017
Posts: 211
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
I think you need to rotate the FD counterclockwise a bit like 1 or 2 or even 3 degrees (if viewed from the top). This takes trial and error to see which angle adjustment works.
That adjustment would change the contact point of the FD and chain closer to the big ring when downshifting so it takes less movement of the FD to downshift to the mid ring as well as avoid rub at 50/11
Be sure to adjust indexing after you adjust rotation because adjusting rotation / angle of the FD will definitely affect indexing. Good luck!
Hint: The FD doesn't need to be perfectly parallel against the chainrings (when viewed from the top) if that fixes the problem. While youtube videos will tell you it has to be perfectly parallel. It won't always be the case in reality.
That adjustment would change the contact point of the FD and chain closer to the big ring when downshifting so it takes less movement of the FD to downshift to the mid ring as well as avoid rub at 50/11
Be sure to adjust indexing after you adjust rotation because adjusting rotation / angle of the FD will definitely affect indexing. Good luck!
Hint: The FD doesn't need to be perfectly parallel against the chainrings (when viewed from the top) if that fixes the problem. While youtube videos will tell you it has to be perfectly parallel. It won't always be the case in reality.
The FD appears in the photos to be a few mm too high. It should clear the large chain ring by 1 to 2 mm. I agree with the 1 to 2 degrees of rotation.
As a last desperate measure before you replace parts, I would try "modifying" the FD cage. Use adjustable wrenches to bend the outer plate a fraction of a mm, see if you can get the right clearance in the right spot, and still retain shift quality. I've done that on cheaper bikes and components, and would never do it on someone else's or a client's bike.
As a last desperate measure before you replace parts, I would try "modifying" the FD cage. Use adjustable wrenches to bend the outer plate a fraction of a mm, see if you can get the right clearance in the right spot, and still retain shift quality. I've done that on cheaper bikes and components, and would never do it on someone else's or a client's bike.
The DR is also positioned slightly higher than necessary. I would try dropping it down a few mm and see if that helps, especially when combined with an optimum angle as mentioned by others.
Basically, just start from scratch as if you were installing it for the first time and setting the height and angle and setting up the indexing. Sometimes that works better than trying to make minor tweaks to an existing position.
Basically, just start from scratch as if you were installing it for the first time and setting the height and angle and setting up the indexing. Sometimes that works better than trying to make minor tweaks to an existing position.
First thing I would do is clean the chain, cassette and chainrings really well. From the pictures it looks like sandy grit on the drivetrain and I find in extreme cases it can cause chain suck and it less extreme cases it can slow down shifting. The next thing I would do is adjust the front derailleur by rotating it clockwise so the rear part of the cage is slightly inboard which I find can help with downshifting. Also make sure the bottom of the cage is in the correct position in relation to the top of the chain rings.
Clearly the position seems wrong, thanks!
#6
Not a newbie to cycling
Join Date: Oct 2020
Posts: 911
Bikes: Omnium Cargo Ti with Rohloff, Bullitt Milk Plus, Dahon Smooth Hound
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 356 Post(s)
Liked 323 Times
in
199 Posts
Bring a bucket or two of soapy water and a brush and do it on the street. You don't need to do it inside or on a balcony. People also wash their cars or motorcycles in the street.
#7
Full Member
Join Date: Nov 2016
Location: SoCal
Posts: 489
Bikes: 2014 Bruce Gordon Rock&Road, 1995 Santana Visa Tandem, 1990 Trek 520, 2012 Surly LHT
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Likes: 0
Liked 43 Times
in
35 Posts
When cleaning anything outside,(even with "biodegradable" products) try to make sure your wash/rinse water goes to a sanitary ewer that leads to a wastewater treatment plant and not the storm sewer, which leads to those overrated bodies of water like lakes and rivers. Though I am guilty of washing my car and bikes in the driveway with water running off to the storm sewer. so who am I to preach. Just a thought we can all try to be easier on the environment.
Likes For Eggman84:
#8
Not a newbie to cycling
Join Date: Oct 2020
Posts: 911
Bikes: Omnium Cargo Ti with Rohloff, Bullitt Milk Plus, Dahon Smooth Hound
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 356 Post(s)
Liked 323 Times
in
199 Posts
When cleaning anything outside,(even with "biodegradable" products) try to make sure your wash/rinse water goes to a sanitary ewer that leads to a wastewater treatment plant and not the storm sewer, which leads to those overrated bodies of water like lakes and rivers. Though I am guilty of washing my car and bikes in the driveway with water running off to the storm sewer. so who am I to preach. Just a thought we can all try to be easier on the environment.
#9
Full Member
Thread Starter
Join Date: Mar 2017
Posts: 211
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 8 Times
in
6 Posts
@cubewheels @andrewclaus @AeroGut @ARider2
I changed the position of the FD as you guys suggested and it worked flawlessly for a 2h30 ride, thank you very much!
I can't believe the 3 LBS couldn't figure this out.. one of them didn't even realize my shifter has a trimming position for each ring
Thanks again, its actually the first time i experience smooth 105 and i'm very pleased, comming from old soras
I changed the position of the FD as you guys suggested and it worked flawlessly for a 2h30 ride, thank you very much!
I can't believe the 3 LBS couldn't figure this out.. one of them didn't even realize my shifter has a trimming position for each ring
Thanks again, its actually the first time i experience smooth 105 and i'm very pleased, comming from old soras
Likes For dirtydozen:
#10
Passista
Join Date: Jul 2005
Posts: 7,598
Bikes: 1998 Pinarello Asolo, 1992 KHS Montaņa pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 721 Times
in
396 Posts
@cubewheels @andrewclaus @AeroGut @ARider2
I changed the position of the FD as you guys suggested and it worked flawlessly for a 2h30 ride, thank you very much!
I can't believe the 3 LBS couldn't figure this out.. one of them didn't even realize my shifter has a trimming position for each ring
Thanks again, its actually the first time i experience smooth 105 and i'm very pleased, comming from old soras
I changed the position of the FD as you guys suggested and it worked flawlessly for a 2h30 ride, thank you very much!
I can't believe the 3 LBS couldn't figure this out.. one of them didn't even realize my shifter has a trimming position for each ring
Thanks again, its actually the first time i experience smooth 105 and i'm very pleased, comming from old soras
The first thing I do when trying to fix FD issues is to check the FD is as near the big ring as possible without touching it. This solves many problems with only 2 adjustments, FD height and cable.